Statistical validation
1,656
Analyses listed
1,308
Validated against R
118
Validated against NIST certified values
255
Validated analytically
1
Validated against a published example
0
Validated by an independent reviewer
45
With runnable R code ⟨R⟩
Every analysis window in HypoNum is listed below with the independent references it has been compared against: R, NIST certified datasets, closed-form results, or a published worked example. A tick means the product’s result agreed with the reference under our accuracy policy, which requires agreement to at least four significant digits for probabilities and dispersion statistics and exact equality for counts and decisions. When a comparison disagrees we correct the software; disagreements are not footnoted away. This page is regenerated from the complete comparison suite for each release.
Assessed build: HypoNum 0.1.0.
Explore
| Window | Analysis | Settings compared | NIST | R | Analytical | Published example | Independent reviewer |
|---|---|---|---|---|---|---|---|
| Explain multimodality | One categorical column separates the two modes | default settings | ✓ exact ↗ | ||||
| Explain multimodality | Only a two-column conjunction identifies the upper mode | default settings | ✓ exact ↗ | ||||
| Explain multimodality | Retained Poisson fit: exact rate, likelihood, BIC and row allocations | default settings | ✓ Δ 2.2×10-15 (15+ digits) ↗ | ||||
| Explain multimodality | Retained single-Gaussian fit: exact MLE, likelihood, BIC and row allocations | default settings | ✓ Δ 4.9×10-15 (15+ digits) ↗ | ||||
| Multimodality | Bimodality coefficient of two separated modes | active methods = BC | ✓ Δ 3.3×10-16 (15+ digits) ↗ | ||||
| Multimodality | Bounded support: dip remains available and automatic KDE signal is refused | measurement = continuous; replicates = 999; seed = 17; support = bounded | ✓ Δ 2.1×10-17 (15+ digits) ↗ | ||||
| Multimodality | Current screen: independent dip and bandwidth on two continuous columns | measurement = continuous; replicates = 999; seed = 17 | ✓ Δ 3.0×10-17 (15+ digits) ↗ | ||||
| Multimodality | Declared discrete counts refuse both continuous screen methods | measurement = discrete | ✓ Δ 2.2×10-19 (15+ digits) ↗ |
Statistics
| Window | Analysis | Settings compared | NIST | R | Analytical | Published example | Independent reviewer |
|---|---|---|---|---|---|---|---|
| Bootstrap estimates | Bootstrap estimate 10 percent trimmed mean | confidence level = 0.95; intervals = percentile; resamples = 200; scheme = rows; seed = 20260928; statistic = trimmed_mean; trim = 0.1 | ✓ Δ 1.3×10-15 (15+ digits) ↗ | ||||
| Bootstrap estimates | Bootstrap estimate Pearson correlation | confidence level = 0.95; intervals = percentile; resamples = 200; scheme = rows; second = w; seed = 20260928; statistic = pearson | ✓ Δ 1.1×10-16 (15+ digits) ↗ | ||||
| Bootstrap estimates | Bootstrap estimate first quartile | confidence level = 0.95; intervals = percentile; probability = 0.25; resamples = 200; scheme = rows; seed = 20260928; statistic = quantile | ✓ Δ 1.5×10-15 (15+ digits) ↗ | ||||
| Bootstrap estimates | Bootstrap estimate mean | confidence level = 0.95; intervals = percentile; resamples = 200; scheme = rows; seed = 20260928; statistic = mean | ✓ exact ↗ | ||||
| Bootstrap estimates | Bootstrap estimate mean difference B minus A | confidence level = 0.95; intervals = percentile; resamples = 200; scheme = rows; seed = 20260928; statistic = mean_difference | ✓ Δ 4.4×10-18 (15+ digits) ↗ | ||||
| Bootstrap estimates | Bootstrap estimate mean minus target | confidence level = 0.95; intervals = percentile; resamples = 200; scheme = rows; seed = 20260928; statistic = mean_minus_target; target = 12 | ✓ exact ↗ | ||||
| Bootstrap estimates | Bootstrap estimate mean of paired differences | confidence level = 0.95; intervals = percentile; resamples = 200; scheme = rows; second = w; seed = 20260928; statistic = paired_mean_difference | ✓ Δ 8.3×10-18 (15+ digits) ↗ | ||||
| Bootstrap estimates | Bootstrap estimate median | confidence level = 0.95; intervals = percentile; resamples = 200; scheme = rows; seed = 20260928; statistic = median | ✓ Δ 3.6×10-16 (15+ digits) ↗ | ||||
| Bootstrap estimates | Bootstrap estimate standard deviation | confidence level = 0.95; intervals = percentile; resamples = 200; scheme = rows; seed = 20260928; statistic = sd | ✓ Δ 1.6×10-17 (15+ digits) ↗ | ||||
| Meta-analysis | Fixed | data = generic; effect = effect; measure = hedges_g; standard error = se; study = study | ✓ Δ 3.6×10-15 (13 digits) ↗ | ||||
| Meta-analysis | Random | confidence level = 0.99; data = generic; effect = effect; inference = normal; measure = hedges_g; standard error = se; study = study; tau2 = pm | ✓ Δ 2.5×10-10 (10 digits) ↗ | ||||
| Meta-analysis | Random | confidence level = 0.9; data = continuous; inference = modified_hk; mean1 = mean1; mean2 = mean2; measure = hedges_g; n1 = n1; n2 = n2; sd1 = sd1; sd2 = sd2; study = study; tau2 = dl | ✓ Δ 6.9×10-15 (14 digits) ↗ | ||||
| Meta-analysis | Random | correction = 0.5; data = binary; events1 = events1; events2 = events2; inference = hk; measure = log_or; study = study; tau2 = reml; total1 = total1; total2 = total2 | ✓ Δ 1.5×10-14 (13 digits) ↗ | ||||
| Meta-analysis | Random | data = generic; effect = effect; inference = normal; measure = hedges_g; standard error = se; study = study; tau2 = dl | ✓ Δ 7.1×10-15 (13 digits) ↗ |
Statistics › Bayesian statistics
| Window | Analysis | Settings compared | NIST | R | Analytical | Published example | Independent reviewer |
|---|---|---|---|---|---|---|---|
| Binomial proportion | 90% credible interval, event 'fail' | confidence level = 0.9; event value = fail; null proportion = 0.5; prior a = 1; prior b = 1 | ✓ Δ 9.7×10-14 (12 digits) ↗ | ||||
| Binomial proportion | Beta(1, 1) prior against p = 0.5 | confidence level = 0.95; event value = pass; null proportion = 0.5; prior a = 1; prior b = 1 | ✓ Δ 2.8×10-13 (12 digits) ↗ | ||||
| Binomial proportion | Informative Beta(2, 5) prior against p = 0.3 | confidence level = 0.95; event value = pass; null proportion = 0.3; prior a = 2; prior b = 5 | ✓ Δ 2.3×10-13 (12 digits) ↗ | ||||
| Binomial proportion | Three excluded rows | confidence level = 0.95; event value = pass; null proportion = 0.5; prior a = 1; prior b = 1 | ✓ Δ 2.4×10-13 (12 digits) ↗ | ||||
| Linear regression | All models of x1 and x2, Zellner-Siow medium scale | confidence level = 0.95; hyper a = 3; prior = zellner_siow; prior scale = 0.353553 | ✓ Δ 2.9×10-13 (14 digits) ↗ | ||||
| Linear regression | Declared models with custom prior weights | confidence level = 0.95; hyper a = 3; model prior = 0.5, 0.25; stored fits supplied; null model prior = 0.25; prior = zellner_siow; prior scale = 0.353553 | ✓ Δ 2.9×10-13 (14 digits) ↗ | ||||
| Linear regression | Hyper-g prior, a = 3 | confidence level = 0.95; hyper a = 3; prior = hyper_g; prior scale = 0.353553 | ✓ Δ 1.8×10-7 (6 digits) ↗ | ||||
| Linear regression | Zellner-Siow unit scale, 90% interval | confidence level = 0.9; hyper a = 3; prior = zellner_siow; prior scale = 1 | ✓ Δ 6.2×10-13 (13 digits) ↗ | ||||
| Normal mean (known SD) | 90% credible interval | confidence level = 0.9; known sd = 1; null value = 0; prior mean = 0; prior sd = 1 | ✓ Δ 2.2×10-13 (12 digits) ↗ | ||||
| Normal mean (known SD) | Informative Normal(1, 0.5) prior, known SD 1.2, null 0.5 | confidence level = 0.95; known sd = 1.2; null value = 0.5; prior mean = 1; prior sd = 0.5 | ✓ Δ 3.4×10-13 (11 digits) ↗ | ||||
| Normal mean (known SD) | Normal(0, 1) prior, known SD 1, null 0 | confidence level = 0.95; known sd = 1; null value = 0; prior mean = 0; prior sd = 1 | ✓ Δ 3.1×10-13 (11 digits) ↗ | ||||
| One-way ANOVA | Three-level factor, scale 0.5 | confidence level = 0.95; prior scale = 0.5 | ✓ Δ 2.2×10-14 (13 digits) ↗ | ||||
| One-way ANOVA | Three-level factor, scale 1 | confidence level = 0.95; prior scale = 1 | ✓ Δ 2.8×10-14 (13 digits) ↗ | ||||
| One-way ANOVA | Two-level factor, 90% interval | confidence level = 0.9; prior scale = 0.5 | ✓ Δ 2.4×10-14 (13 digits) ↗ | ||||
| Pearson correlation | Stretched Beta(2, 2) prior (width 0.5) | confidence level = 0.95; first = x1; prior width = 0.5; second = y | ✓ Δ 6.8×10-13 (14 digits) ↗ | ||||
| Pearson correlation | Uniform prior (width 1) on x1 and y | confidence level = 0.95; first = x1; prior width = 1; second = y | ✓ Δ 1.1×10-12 (14 digits) ↗ | ||||
| Pearson correlation | Weak correlation x2 and d, 90% interval | confidence level = 0.9; first = x2; prior width = 1; second = d | ✓ Δ 1.4×10-14 (12 digits) ↗ | ||||
| Poisson rate | 99% credible interval | confidence level = 0.99; null rate = 2; prior = gamma; prior rate = 1; prior shape = 1 | ✓ Δ 1.4×10-12 (12 digits) ↗ | ||||
| Poisson rate | Gamma(1, 1) prior, unit exposure, rate 1 | confidence level = 0.95; null rate = 1; prior = gamma; prior rate = 1; prior shape = 1 | ✓ Δ 2.7×10-13 (13 digits) ↗ | ||||
| Poisson rate | Gamma(2, 0.5) prior with an exposure column | confidence level = 0.95; exposure = exposure; null rate = 1.5; prior = gamma; prior rate = 0.5; prior shape = 2 | ✓ Δ 3.3×10-13 (12 digits) ↗ | ||||
| Poisson rate | Jeffreys prior with an exposure column (posterior only) | confidence level = 0.95; exposure = exposure; null rate = 1; prior = jeffreys; prior rate = 1; prior shape = 1 | ✓ Δ 4.0×10-14 (13 digits) ↗ | ||||
| t tests | Independent-samples JZS t, code-point group order | confidence level = 0.95; design = independent; null value = 0; prior scale = 0.707107 | ✓ Δ 4.2×10-15 (13 digits) ↗ | ||||
| t tests | Independent-samples JZS t, group B first | confidence level = 0.95; design = independent; null value = 0; prior scale = 0.707107 | ✓ Δ 3.1×10-15 (14 digits) ↗ | ||||
| t tests | One-sample JZS t, default scale | confidence level = 0.95; design = one_sample; null value = 0; prior scale = 0.707107 | ✓ Δ 3.2×10-14 (13 digits) ↗ | ||||
| t tests | One-sample JZS t, scale 1, null 0.3, 90% interval | confidence level = 0.9; design = one_sample; null value = 0.3; prior scale = 1 | ✓ Δ 1.7×10-14 (13 digits) ↗ | ||||
| t tests | Paired JZS t | confidence level = 0.95; design = paired; null value = 0; prior scale = 0.707107; second = d2 | ✓ Δ 1.8×10-14 (14 digits) ↗ |
Statistics › Correlation & regression
| Window | Analysis | Settings compared | NIST | R | Analytical | Published example | Independent reviewer |
|---|---|---|---|---|---|---|---|
| Correlation & covariance | Correlation & covariance | default settings | ✓ ↗ | ||||
| Correlation & covariance | Correlation & covariance | metric = covariance | ✓ Δ 2.6×10-9 (8 digits) ↗ | ||||
| Correlation & covariance | Correlation & covariance | metric = pearson | ✓ Δ 1.1×10-16 (15+ digits) ↗ | ||||
| Correlation & covariance | Correlation & covariance | metric = spearman | ✓ Δ 1.1×10-18 (15+ digits) ↗ | ||||
| Correlation & covariance | Correlation & covariance | unknown option = 1 | ✓ ↗ | ||||
| Correlation & covariance | Kendall tau-b exact inference | deletion = pairwise; inference = exact | ✓ Δ 2.5×10-17 (9 digits) ↗ | ||||
| Correlation & covariance | Kendall tau-b listwise deletion | deletion = listwise; inference = asymptotic | ✓ Δ 4.9×10-16 (14 digits) ↗ | ||||
| Correlation & covariance | Kendall tau-b pairwise deletion | deletion = pairwise; inference = asymptotic | ✓ Δ 4.9×10-16 (14 digits) ↗ | ||||
| Correlation & covariance | Kendall tau-b tie-corrected normal | deletion = pairwise; inference = asymptotic | ✓ Δ 1.1×10-16 (15+ digits) ↗ | ||||
| Correlation & covariance | Missing and excluded multivariate population | default settings | ✓ Δ 5.1×10-17 (15+ digits) ↗ | ||||
| Correlation & covariance | Multivariate | metric = pearson | ✓ Δ 1.1×10-16 (15+ digits) ↗ | ||||
| Correlation & covariance | Multivariate option | metric = covariance | ✓ Δ 4.5×10-16 (15+ digits) ↗ | ||||
| Correlation & covariance | Multivariate option | metric = spearman | ✓ Δ 1.1×10-18 (15+ digits) ↗ | ||||
| Partial correlation | Partial correlation one control | controls = c1 | ✓ Δ 4.0×10-15 (14 digits) ↗ | ||||
| Partial correlation | Partial correlation redundant control | controls = c1, c2 | ✓ Δ 7.1×10-15 (13 digits) ↗ | ||||
| Partial correlation | Partial correlation two controls with a missing control value | controls = c1, c3 | ✓ Δ 6.8×10-15 (14 digits) ↗ |
Statistics › Correlation & regression › Continuous-response models
| Window | Analysis | Settings compared | NIST | R | Analytical | Published example | Independent reviewer |
|---|---|---|---|---|---|---|---|
| Curve fitting | Curve estimation log-scale curves 90 percent | confidence level = 0.9; curves = power, compound, s, growth, exponential | ✓ Δ 1.5×10-12 (13 digits) ↗ | ||||
| Curve fitting | Curve estimation logistic with upper bound | confidence level = 0.95; curves = logistic; upper bound = 50 | ✓ Δ 1.6×10-12 (13 digits) ↗ | ||||
| Curve fitting | Curve estimation original-scale curves | confidence level = 0.95; curves = linear, quadratic, cubic, logarithmic, inverse | ✓ Δ 7.9×10-11 (12 digits) ↗ | ||||
| Curve fitting | Curve estimation sequence with input positions | confidence level = 0.95; curves = linear, quadratic; sequence = input_position | ✓ Δ 4.6×10-12 (13 digits) ↗ | ||||
| Curve fitting | Curve estimation sequence with retained order | confidence level = 0.95; curves = linear, quadratic; sequence = retained_order | ✓ Δ 5.7×10-13 (13 digits) ↗ | ||||
| Curve fitting | Curve fitting | bad setting = 1; curve = exponential_decay; parameters = a from 4, k from 0.8, c from 1 | ✓ ↗ | ||||
| Curve fitting | Curve fitting | curve = asymptotic_growth; parameters = a from 4, k from 0.8, c from 1 | ✓ Δ 5.0×10-10 (9 digits) ↗ | ||||
| Curve fitting | Curve fitting | curve = exponential_decay; parameters = a from 4, k from 0.8, c from 1 | ✓ Δ 4.2×10-10 (9 digits) ↗ | ✓ ↗ | |||
| Curve fitting | Curve fitting | curve = exponential_decay; parameters = a from 4, k from 0.8, c from 10001 | ✓ Δ 8.8×10-8 (6 digits) ↗ | ||||
| Curve fitting | Curve fitting | curve = four_parameter_logistic; parameters = lo from 1, hi from 5, mid from 4, slope from 2 | ✓ Δ 1.3×10-9 (9 digits) ↗ | ||||
| Curve fitting | NIST Bennett5: nonlinear regression Start 1 | curve = custom; expression = b1 * (b2+x)**(-1/b3); max evaluations = 10000; parameters = b1 from -2000, b2 from 50, b3 from 0.8 | ✓ Δ 6.0×10-7 (10 digits)1 ↗ | ||||
| Curve fitting | NIST Bennett5: nonlinear regression Start 2 | curve = custom; expression = b1 * (b2+x)**(-1/b3); max evaluations = 10000; parameters = b1 from -1500, b2 from 45, b3 from 0.85 | ✓ Δ 1.7×10-6 (10 digits)2 ↗ | ||||
| Curve fitting | NIST BoxBOD: nonlinear regression Start 1 | curve = custom; expression = b1*(1-exp(-b2*x)); max evaluations = 10000; parameters = b1 from 1, b2 from 1 | ✓ Δ 4.4×10-8 (10 digits) ↗ | ||||
| Curve fitting | NIST BoxBOD: nonlinear regression Start 2 | curve = custom; expression = b1*(1-exp(-b2*x)); max evaluations = 10000; parameters = b1 from 100, b2 from 0.75 | ✓ Δ 4.4×10-8 (10 digits)3 ↗ | ||||
| Curve fitting | NIST Chwirut1: nonlinear regression Start 1 | curve = custom; expression = exp(-b1*x)/(b2+b3*x); max evaluations = 10000; parameters = b1 from 0.1, b2 from 0.01, b3 from 0.02 | ✓ Δ 9.4×10-9 (10 digits)4 ↗ | ||||
| Curve fitting | NIST Chwirut1: nonlinear regression Start 2 | curve = custom; expression = exp(-b1*x)/(b2+b3*x); max evaluations = 10000; parameters = b1 from 0.15, b2 from 0.008, b3 from 0.01 | ✓ Δ 9.3×10-9 (10 digits)5 ↗ | ||||
| Curve fitting | NIST Chwirut2: nonlinear regression Start 1 | curve = custom; expression = exp(-b1*x)/(b2+b3*x); max evaluations = 10000; parameters = b1 from 0.1, b2 from 0.01, b3 from 0.02 | ✓ Δ 3.1×10-9 (10 digits)6 ↗ | ||||
| Curve fitting | NIST Chwirut2: nonlinear regression Start 2 | curve = custom; expression = exp(-b1*x)/(b2+b3*x); max evaluations = 10000; parameters = b1 from 0.15, b2 from 0.008, b3 from 0.01 | ✓ Δ 3.1×10-9 (10 digits)7 ↗ | ||||
| Curve fitting | NIST DanWood: nonlinear regression Start 1 | curve = custom; expression = b1*x**b2; max evaluations = 10000; parameters = b1 from 1, b2 from 5 | ✓ Δ 2.4×10-11 (10 digits)8 ↗ | ||||
| Curve fitting | NIST DanWood: nonlinear regression Start 2 | curve = custom; expression = b1*x**b2; max evaluations = 10000; parameters = b1 from 0.7, b2 from 4 | ✓ Δ 2.4×10-11 (10 digits) ↗ | ||||
| Curve fitting | NIST ENSO: nonlinear regression Start 1 | curve = custom; expression = b1 + b2*cos( 2*3.141592653589793*x/12 ) + b3*sin( 2*3.141592653589793*x/12 ) + b5*cos( 2*3.141592653589793*x/b4 ) + b...; max evaluations = 10000; parameters = b1 from 11, b2 from 3, b3 from 0.5, b4 from 40, b5 from -0.7, b6 from -1.3, b7 from 25, b8 from -0.3, b9 from 1.4 | ✓ Δ 2.9×10-9 (10 digits) ↗ | ||||
| Curve fitting | NIST ENSO: nonlinear regression Start 2 | curve = custom; expression = b1 + b2*cos( 2*3.141592653589793*x/12 ) + b3*sin( 2*3.141592653589793*x/12 ) + b5*cos( 2*3.141592653589793*x/b4 ) + b...; max evaluations = 10000; parameters = b1 from 10, b2 from 3, b3 from 0.5, b4 from 44, b5 from -1.5, b6 from 0.5, b7 from 26, b8 from -0.1, b9 from 1.5 | ✓ Δ 2.9×10-9 (10 digits) ↗ | ||||
| Curve fitting | NIST Eckerle4: nonlinear regression Start 1 | curve = custom; expression = (b1/b2) * exp(-0.5*((x-b3)/b2)**2); max evaluations = 10000; parameters = b1 from 1, b2 from 10, b3 from 500 | ✓ Δ 3.9×10-9 (10 digits) ↗ | ||||
| Curve fitting | NIST Eckerle4: nonlinear regression Start 2 | curve = custom; expression = (b1/b2) * exp(-0.5*((x-b3)/b2)**2); max evaluations = 10000; parameters = b1 from 1.5, b2 from 5, b3 from 450 | ✓ Δ 3.9×10-9 (10 digits)9 ↗ | ||||
| Curve fitting | NIST Gauss1: nonlinear regression Start 1 | curve = custom; expression = b1*exp( -b2*x ) + b3*exp( -(x-b4)**2 / b5**2 ) + b6*exp( -(x-b7)**2 / b8**2 ); max evaluations = 10000; parameters = b1 from 97, b2 from 0.009, b3 from 100, b4 from 65, b5 from 20, b6 from 70, b7 from 178, b8 from 16.5 | ✓ Δ 3.4×10-9 (10 digits)10 ↗ | ||||
| Curve fitting | NIST Gauss1: nonlinear regression Start 2 | curve = custom; expression = b1*exp( -b2*x ) + b3*exp( -(x-b4)**2 / b5**2 ) + b6*exp( -(x-b7)**2 / b8**2 ); max evaluations = 10000; parameters = b1 from 94, b2 from 0.0105, b3 from 99, b4 from 63, b5 from 25, b6 from 71, b7 from 180, b8 from 20 | ✓ Δ 3.4×10-9 (10 digits) ↗ | ||||
| Curve fitting | NIST Gauss2: nonlinear regression Start 1 | curve = custom; expression = b1*exp( -b2*x ) + b3*exp( -(x-b4)**2 / b5**2 ) + b6*exp( -(x-b7)**2 / b8**2 ); max evaluations = 10000; parameters = b1 from 96, b2 from 0.009, b3 from 103, b4 from 106, b5 from 18, b6 from 72, b7 from 151, b8 from 18 | ✓ Δ 3.1×10-8 (10 digits) ↗ | ||||
| Curve fitting | NIST Gauss2: nonlinear regression Start 2 | curve = custom; expression = b1*exp( -b2*x ) + b3*exp( -(x-b4)**2 / b5**2 ) + b6*exp( -(x-b7)**2 / b8**2 ); max evaluations = 10000; parameters = b1 from 98, b2 from 0.0105, b3 from 103, b4 from 105, b5 from 20, b6 from 73, b7 from 150, b8 from 20 | ✓ Δ 3.1×10-8 (10 digits) ↗ | ||||
| Curve fitting | NIST Gauss3: nonlinear regression Start 1 | curve = custom; expression = b1*exp( -b2*x ) + b3*exp( -(x-b4)**2 / b5**2 ) + b6*exp( -(x-b7)**2 / b8**2 ); max evaluations = 10000; parameters = b1 from 94.9, b2 from 0.009, b3 from 90.1, b4 from 113, b5 from 20, b6 from 73.8, b7 from 140, b8 from 20 | ✓ Δ 1.3×10-8 (10 digits) ↗ | ||||
| Curve fitting | NIST Gauss3: nonlinear regression Start 2 | curve = custom; expression = b1*exp( -b2*x ) + b3*exp( -(x-b4)**2 / b5**2 ) + b6*exp( -(x-b7)**2 / b8**2 ); max evaluations = 10000; parameters = b1 from 96, b2 from 0.0096, b3 from 80, b4 from 110, b5 from 25, b6 from 74, b7 from 139, b8 from 25 | ✓ Δ 1.3×10-8 (10 digits)11 ↗ | ||||
| Curve fitting | NIST Hahn1: nonlinear regression Start 1 | curve = custom; expression = (b1+b2*x+b3*x**2+b4*x**3) / (1+b5*x+b6*x**2+b7*x**3); max evaluations = 10000; parameters = b1 from 10, b2 from -1, b3 from 0.05, b4 from -1e-05, b5 from -0.05, b6 from 0.001, b7 from -1e-06 | ✓ Δ 5.9×10-11 (8 digits) ↗ | ||||
| Curve fitting | NIST Hahn1: nonlinear regression Start 2 | curve = custom; expression = (b1+b2*x+b3*x**2+b4*x**3) / (1+b5*x+b6*x**2+b7*x**3); max evaluations = 10000; parameters = b1 from 1, b2 from -0.1, b3 from 0.005, b4 from -1e-06, b5 from -0.005, b6 from 0.0001, b7 from -1e-07 | ✓ Δ 3.9×10-11 (9 digits) ↗ | ||||
| Curve fitting | NIST Kirby2: nonlinear regression Start 1 | curve = custom; expression = (b1 + b2*x + b3*x**2) / (1 + b4*x + b5*x**2); max evaluations = 10000; parameters = b1 from 2, b2 from -0.1, b3 from 0.003, b4 from -0.001, b5 from 1e-05 | ✓ Δ 2.2×10-11 (10 digits)12 ↗ | ||||
| Curve fitting | NIST Kirby2: nonlinear regression Start 2 | curve = custom; expression = (b1 + b2*x + b3*x**2) / (1 + b4*x + b5*x**2); max evaluations = 10000; parameters = b1 from 1.5, b2 from -0.15, b3 from 0.0025, b4 from -0.0015, b5 from 2e-05 | ✓ Δ 2.2×10-11 (10 digits)13 ↗ | ||||
| Curve fitting | NIST Lanczos1: nonlinear regression Start 1 | curve = custom; expression = b1*exp(-b2*x) + b3*exp(-b4*x) + b5*exp(-b6*x); max evaluations = 10000; parameters = b1 from 1.2, b2 from 0.3, b3 from 5.6, b4 from 5.5, b5 from 6.5, b6 from 7.6 | ✓ Δ 3.8×10-11 (6 digits) ↗ | ||||
| Curve fitting | NIST Lanczos1: nonlinear regression Start 2 | curve = custom; expression = b1*exp(-b2*x) + b3*exp(-b4*x) + b5*exp(-b6*x); max evaluations = 10000; parameters = b1 from 0.5, b2 from 0.7, b3 from 3.6, b4 from 4.2, b5 from 4, b6 from 6.3 | ✓ Δ 3.8×10-11 (6 digits)14 ↗ | ||||
| Curve fitting | NIST Lanczos2: nonlinear regression Start 1 | curve = custom; expression = b1*exp(-b2*x) + b3*exp(-b4*x) + b5*exp(-b6*x); max evaluations = 10000; parameters = b1 from 1.2, b2 from 0.3, b3 from 5.6, b4 from 5.5, b5 from 6.5, b6 from 7.6 | ✓ Δ 1.8×10-9 (8 digits) ↗ | ||||
| Curve fitting | NIST Lanczos2: nonlinear regression Start 2 | curve = custom; expression = b1*exp(-b2*x) + b3*exp(-b4*x) + b5*exp(-b6*x); max evaluations = 10000; parameters = b1 from 0.5, b2 from 0.7, b3 from 3.6, b4 from 4.2, b5 from 4, b6 from 6.3 | ✓ Δ 3.7×10-10 (8 digits) ↗ | ||||
| Curve fitting | NIST Lanczos3: nonlinear regression Start 1 | curve = custom; expression = b1*exp(-b2*x) + b3*exp(-b4*x) + b5*exp(-b6*x); max evaluations = 10000; parameters = b1 from 1.2, b2 from 0.3, b3 from 5.6, b4 from 5.5, b5 from 6.5, b6 from 7.6 | ✓ Δ 4.2×10-10 (8 digits)15 ↗ | ||||
| Curve fitting | NIST Lanczos3: nonlinear regression Start 2 | curve = custom; expression = b1*exp(-b2*x) + b3*exp(-b4*x) + b5*exp(-b6*x); max evaluations = 10000; parameters = b1 from 0.5, b2 from 0.7, b3 from 3.6, b4 from 4.2, b5 from 4, b6 from 6.3 | ✓ Δ 4.9×10-11 (10 digits)16 ↗ | ||||
| Curve fitting | NIST MGH09: nonlinear regression Start 1 | curve = custom; expression = b1*(x**2+x*b2) / (x**2+x*b3+b4); max evaluations = 10000; parameters = b1 from 25, b2 from 39, b3 from 41.5, b4 from 39 | ✓ Δ 4.4×10-12 (10 digits)17 ↗ | ||||
| Curve fitting | NIST MGH09: nonlinear regression Start 2 | curve = custom; expression = b1*(x**2+x*b2) / (x**2+x*b3+b4); max evaluations = 10000; parameters = b1 from 0.25, b2 from 0.39, b3 from 0.415, b4 from 0.39 | ✓ Δ 4.4×10-12 (10 digits)18 ↗ | ||||
| Curve fitting | NIST MGH10: nonlinear regression Start 1 | curve = custom; expression = b1 * exp(b2/(x+b3)); max evaluations = 10000; parameters = b1 from 2, b2 from 400000, b3 from 25000 | ✓ Δ 1.4×10-8 (10 digits) ↗ | ||||
| Curve fitting | NIST MGH10: nonlinear regression Start 2 | curve = custom; expression = b1 * exp(b2/(x+b3)); max evaluations = 10000; parameters = b1 from 0.02, b2 from 4000, b3 from 250 | ✓ Δ 1.6×10-6 (8 digits) ↗ | ||||
| Curve fitting | NIST MGH17: nonlinear regression Start 1 | curve = custom; expression = b1 + b2*exp(-x*b4) + b3*exp(-x*b5); max evaluations = 10000; parameters = b1 from 50, b2 from 150, b3 from -100, b4 from 1, b5 from 2 | ✓ Δ 1.3×10-11 (10 digits) ↗ | ||||
| Curve fitting | NIST MGH17: nonlinear regression Start 2 | curve = custom; expression = b1 + b2*exp(-x*b4) + b3*exp(-x*b5); max evaluations = 10000; parameters = b1 from 0.5, b2 from 1.5, b3 from -1, b4 from 0.01, b5 from 0.02 | ✓ Δ 1.7×10-8 (7 digits)19 ↗ | ||||
| Curve fitting | NIST Misra1a: nonlinear regression Start 1 | curve = custom; expression = b1*(1-exp(-b2*x)); max evaluations = 10000; parameters = b1 from 500, b2 from 0.0001 | ✓ Δ 1.1×10-9 (10 digits)20 ↗ | ||||
| Curve fitting | NIST Misra1a: nonlinear regression Start 2 | curve = custom; expression = b1*(1-exp(-b2*x)); max evaluations = 10000; parameters = b1 from 250, b2 from 0.0005 | ✓ Δ 1.1×10-9 (10 digits)21 ↗ | ||||
| Curve fitting | NIST Misra1b: nonlinear regression Start 1 | curve = custom; expression = b1 * (1-(1+b2*x/2)**(-2)); max evaluations = 10000; parameters = b1 from 500, b2 from 0.0001 | ✓ Δ 3.7×10-9 (10 digits)22 ↗ | ||||
| Curve fitting | NIST Misra1b: nonlinear regression Start 2 | curve = custom; expression = b1 * (1-(1+b2*x/2)**(-2)); max evaluations = 10000; parameters = b1 from 300, b2 from 0.0002 | ✓ Δ 3.7×10-9 (10 digits)23 ↗ | ||||
| Curve fitting | NIST Misra1c: nonlinear regression Start 1 | curve = custom; expression = b1 * (1-(1+2*b2*x)**(-.5)); max evaluations = 10000; parameters = b1 from 500, b2 from 0.0001 | ✓ Δ 3.0×10-9 (10 digits)24 ↗ | ||||
| Curve fitting | NIST Misra1c: nonlinear regression Start 2 | curve = custom; expression = b1 * (1-(1+2*b2*x)**(-.5)); max evaluations = 10000; parameters = b1 from 600, b2 from 0.0002 | ✓ Δ 3.0×10-9 (10 digits)25 ↗ | ||||
| Curve fitting | NIST Misra1d: nonlinear regression Start 1 | curve = custom; expression = b1*b2*x*((1+b2*x)**(-1)); max evaluations = 10000; parameters = b1 from 500, b2 from 0.0001 | ✓ Δ 1.8×10-10 (10 digits)26 ↗ | ||||
| Curve fitting | NIST Misra1d: nonlinear regression Start 2 | curve = custom; expression = b1*b2*x*((1+b2*x)**(-1)); max evaluations = 10000; parameters = b1 from 450, b2 from 0.0003 | ✓ Δ 1.8×10-10 (10 digits)27 ↗ | ||||
| Curve fitting | NIST Nelson: nonlinear regression Start 1 | curve = custom; expression = b1 - b2*x * exp(-b3*x2); max evaluations = 10000; parameters = b1 from 2, b2 from 0.0001, b3 from -0.01 | ✓ Δ 4.5×10-11 (10 digits) ↗ | ||||
| Curve fitting | NIST Nelson: nonlinear regression Start 2 | curve = custom; expression = b1 - b2*x * exp(-b3*x2); max evaluations = 10000; parameters = b1 from 2.5, b2 from 5e-09, b3 from -0.05 | ✓ Δ 4.5×10-11 (10 digits) ↗ | ||||
| Curve fitting | NIST NoInt1: fit | curve = custom; expression = b1*x; parameters = b1 from 1 | ✓ Δ 1.5×10-13 (14 digits) ↗ | ||||
| Curve fitting | NIST NoInt2: fit | curve = custom; expression = b1*x; parameters = b1 from 1 | ✓ Δ 7.9×10-16 (14 digits) ↗ | ||||
| Curve fitting | NIST Rat42: nonlinear regression Start 1 | curve = custom; expression = b1 / (1+exp(b2-b3*x)); max evaluations = 10000; parameters = b1 from 100, b2 from 1, b3 from 0.1 | ✓ Δ 4.3×10-10 (10 digits)28 ↗ | ||||
| Curve fitting | NIST Rat42: nonlinear regression Start 2 | curve = custom; expression = b1 / (1+exp(b2-b3*x)); max evaluations = 10000; parameters = b1 from 75, b2 from 2.5, b3 from 0.07 | ✓ Δ 4.3×10-10 (10 digits) ↗ | ||||
| Curve fitting | NIST Rat43: nonlinear regression Start 1 | curve = custom; expression = b1 / ((1+exp(b2-b3*x))**(1/b4)); max evaluations = 10000; parameters = b1 from 100, b2 from 10, b3 from 1, b4 from 1 | ✓ Δ 3.7×10-8 (10 digits)29 ↗ | ||||
| Curve fitting | NIST Rat43: nonlinear regression Start 2 | curve = custom; expression = b1 / ((1+exp(b2-b3*x))**(1/b4)); max evaluations = 10000; parameters = b1 from 700, b2 from 5, b3 from 0.75, b4 from 1.3 | ✓ Δ 3.7×10-8 (10 digits)30 ↗ | ||||
| Curve fitting | NIST Roszman1: nonlinear regression Start 1 | curve = custom; expression = b1 - b2*x - arctan(b3/(x-b4))/3.141592653589793; max evaluations = 10000; parameters = b1 from 0.1, b2 from -1e-05, b3 from 1000, b4 from -100 | ✓ Δ 6.7×10-8 (10 digits) ↗ | ||||
| Curve fitting | NIST Roszman1: nonlinear regression Start 2 | curve = custom; expression = b1 - b2*x - arctan(b3/(x-b4))/3.141592653589793; max evaluations = 10000; parameters = b1 from 0.2, b2 from -5e-06, b3 from 1200, b4 from -150 | ✓ Δ 3.2×10-6 (8 digits) ↗ | ||||
| Curve fitting | NIST Thurber: nonlinear regression Start 1 | curve = custom; expression = (b1 + b2*x + b3*x**2 + b4*x**3) / (1 + b5*x + b6*x**2 + b7*x**3); max evaluations = 10000; parameters = b1 from 1000, b2 from 1000, b3 from 400, b4 from 40, b5 from 0.7, b6 from 0.3, b7 from 0.03 | ✓ Δ 2.2×10-4 (6 digits)31 ↗ | ||||
| Curve fitting | NIST Thurber: nonlinear regression Start 2 | curve = custom; expression = (b1 + b2*x + b3*x**2 + b4*x**3) / (1 + b5*x + b6*x**2 + b7*x**3); max evaluations = 10000; parameters = b1 from 1300, b2 from 1500, b3 from 500, b4 from 75, b5 from 1, b6 from 0.4, b7 from 0.05 | ✓ Δ 4.6×10-8 (10 digits)32 ↗ | ||||
| Curve fitting | Regression edge | curve = exponential_decay; parameters = a from 9.5, k from 0.8, c from 1 | ✓ Δ 1.5×10-10 (10 digits) ↗ | ||||
| Deming regression - measurement error | Deming regression with lambda 1 | default settings | ✓ Δ 2.5×10-13 (13 digits) ↗ | ||||
| Deming regression - measurement error | Deming regression with lambda 2.25 | comparable units = yes; lambda ratio = 2.25 | ✓ Δ 2.5×10-13 (13 digits) ↗ | ||||
| Deming regression - measurement error | Jackknife t intervals on the NCSS ten-pair example | interval method = jackknife_t; lambda ratio = 0.25 | ✓ Δ 7.1×10-15 (13 digits) ↗ | ||||
| Deming regression - measurement error | Jackknife t intervals with lambda 2.25 on 40 pairs | interval method = jackknife_t; lambda ratio = 2.25 | ✓ Δ 1.3×10-14 (13 digits) ↗ | ||||
| Deming regression - measurement error | Missing and excluded pairs keep their rows without fitted values | default settings | ✓ Δ 7.2×10-15 (15+ digits) ↗ | ||||
| Deming regression - measurement error | Swapping X and Y with 1/lambda gives the inverse line | lambda ratio = 0.444444 | ✓ Δ 8.9×10-15 (13 digits) ↗ | ||||
| Instrumental-variable regression (2SLS) | STAT REG TWO STAGE 001 | confidence level = 0.95; covariance = classical; endogenous = x; exogenous = w; instruments = z1, z2 | ✓ Δ 2.3×10-13 (13 digits) ↗ | ||||
| Instrumental-variable regression (2SLS) | STAT REG TWO STAGE 002 | confidence level = 0.95; covariance = hc1; endogenous = x; exogenous = w; instruments = z1, z2 | ✓ Δ 1.2×10-13 (13 digits) ↗ | ||||
| Instrumental-variable regression (2SLS) | STAT REG TWO STAGE 003 | confidence level = 0.9; covariance = classical; endogenous = x; instruments = z1 | ✓ Δ 1.7×10-13 (13 digits) ↗ | ||||
| Instrumental-variable regression (2SLS) | STAT REG TWO STAGE 004 | confidence level = 0.99; covariance = hc1; endogenous = x; exogenous = w; instruments = z1, z2 | ✓ Δ 8.5×10-14 (13 digits) ↗ | ||||
| Linear regression | Backward | blocks = x1, x2, x3, x4, x5; casewise = none; casewise threshold = 3; confidence level = 0.95; criterion = bic | ✓ Δ 1.1×10-13 (13 digits) ↗ | ||||
| Linear regression | Best subsets | criterion = aic | ✓ exact ↗ | ||||
| Linear regression | Best subsets | criterion = bic | ✓ exact ↗ | ||||
| Linear regression | Enter | blocks = x1, x2, x3, x4; casewise = all; casewise threshold = 3; confidence level = 0.95; criterion = aic | ✓ Δ 1.1×10-13 (12 digits) ↗ | ||||
| Linear regression | Extreme scale | default settings | ✓ Δ 9.8×10-6 (15+ digits) ↗ | ||||
| Linear regression | Extreme scale | degree = 2; interactions = no; missing = drop; model type = linear; split percent = 100 | ✓ Δ 4.8×10-17 (15+ digits) ↗ | ||||
| Linear regression | Fit axis | algorithm = lasso; cv folds = 3 | ✓ exact ↗ | ||||
| Linear regression | Fit axis | algorithm = ridge; cv folds = 3 | ✓ exact ↗ | ||||
| Linear regression | Fit axis | alpha level = 0.1 | ✓ Δ 2.1×10-16 (15+ digits) ↗ | ||||
| Linear regression | Fit axis | covariance = cluster | ✓ Δ 1.2×10-17 (14 digits) ↗ | ||||
| Linear regression | Fit axis | covariance = hc3 | ✓ Δ 1.7×10-19 (15+ digits) ↗ | ||||
| Linear regression | Fit axis | degree = 2; interactions = no; missing = drop; model type = exponential; split percent = 100 | ✓ Δ 4.8×10-17 (15+ digits) ↗ | ||||
| Linear regression | Fit axis | degree = 2; interactions = no; missing = drop; model type = logarithmic; split percent = 100 | ✓ Δ 2.2×10-16 (15+ digits) ↗ | ||||
| Linear regression | Fit axis | degree = 2; interactions = no; missing = drop; model type = polynomial; split percent = 100 | ✓ Δ 2.0×10-13 (14 digits) ↗ | ||||
| Linear regression | Fit axis | degree = 2; interactions = no; missing = drop; model type = power; split percent = 100 | ✓ Δ 2.2×10-16 (15+ digits) ↗ | ||||
| Linear regression | Fit axis | degree = 2; interactions = no; missing = knn; model type = linear; split percent = 100 | ✓ Δ 2.7×10-16 (15+ digits) ↗ | ||||
| Linear regression | Fit axis | degree = 2; interactions = no; missing = neighbor_average; model type = linear; split percent = 100 | ✓ Δ 2.7×10-16 (15+ digits) ↗ | ||||
| Linear regression | Fit axis | degree = 2; interactions = yes; missing = drop; model type = linear; split percent = 100 | ✓ Δ 2.7×10-16 (15+ digits) ↗ | ||||
| Linear regression | Fit axis | degree = 3; model type = polynomial | ✓ Δ 5.1×10-16 (13 digits) ↗ | ||||
| Linear regression | Fit axis | interactions = yes | ✓ Δ 1.0×10-16 (12 digits) ↗ | ||||
| Linear regression | Fit axis | missing = knn | ✓ Δ 1.8×10-16 (15+ digits) ↗ | ||||
| Linear regression | Fit axis | missing = neighbor_average | ✓ Δ 1.8×10-16 (15+ digits) ↗ | ||||
| Linear regression | Fit axis | model type = exponential | ✓ Δ 2.5×10-17 (15+ digits) ↗ | ||||
| Linear regression | Fit axis | model type = logarithmic | ✓ Δ 3.6×10-17 (15+ digits) ↗ | ||||
| Linear regression | Fit axis | model type = polynomial | ✓ Δ 2.3×10-16 (13 digits) ↗ | ||||
| Linear regression | Fit axis | model type = power | ✓ Δ 5.6×10-17 (15+ digits) ↗ | ||||
| Linear regression | Fit axis | split percent = 80 | ✓ exact ↗ | ||||
| Linear regression | Forward | blocks = x1, x2, x3, x4, x5; casewise = none; casewise threshold = 3; confidence level = 0.95; criterion = aic | ✓ Δ 1.1×10-13 (13 digits) ↗ | ||||
| Linear regression | Linear regression | algorithm = lasso; cv folds = 3; imputation = drop; seed = 7; test fraction = 0.25 | ✓ exact ↗ | ||||
| Linear regression | Linear regression | algorithm = ols; bad setting = 1; imputation = drop; seed = 0; test fraction = 0.25 | ✓ ↗ | ||||
| Linear regression | Linear regression | algorithm = ols; cv folds = 3; imputation = drop | ✓ exact ↗ | ||||
| Linear regression | Linear regression | algorithm = ols; cv folds = 3; imputation = knn; seed = 2 | ✓ exact ↗ | ||||
| Linear regression | Linear regression | algorithm = ols; cv folds = 3; imputation = mean; seed = 2 | ✓ exact ↗ | ||||
| Linear regression | Linear regression | algorithm = ols; imputation = drop; seed = 0; test fraction = 0.2 | ✓ exact ↗ | ||||
| Linear regression | Linear regression | algorithm = ols; imputation = drop; seed = 0; test fraction = 0.25 | ✓ exact ↗ | ✓ ↗ | |||
| Linear regression | Linear regression | algorithm = ridge; cv folds = 3; imputation = drop; seed = 7; test fraction = 0.25 | ✓ exact ↗ | ||||
| Linear regression | Linear regression | alpha level = 2 | ✓ ↗ | ||||
| Linear regression | Linear regression | bad setting = 1 | ✓ ↗ | ||||
| Linear regression | Linear regression | default settings | ✓ Δ 3.2×10-12 (11 digits) ↗ | ✓ ↗ | |||
| Linear regression | Linear regression | degree = 2; interactions = no; missing = bad; model type = linear; split percent = 100 | ✓ ↗ | ||||
| Linear regression | Linear regression | degree = 2; interactions = no; missing = drop; model type = linear; split percent = 100 | ✓ Δ 9.2×10-13 (13 digits) ↗ | ✓ ↗ | |||
| Linear regression | Linear regression | model type = logarithmic | ✓ ↗ | ||||
| Linear regression | Missing and excluded | default settings | ✓ Δ 7.1×10-16 (15+ digits) ↗ | ||||
| Linear regression | Missing and excluded | degree = 2; interactions = no; missing = drop; model type = linear; split percent = 100 | ✓ Δ 2.3×10-16 (15+ digits) ↗ | ||||
| Linear regression | NIST AtmWtAg: fit | algorithm = ols; model type = linear | ✓ Δ 2.5×10-14 (14 digits) ↗ | ||||
| Linear regression | NIST Filip: fit | algorithm = ols; degree = 10; model type = polynomial | ✓ Δ 3.2×10-11 (13 digits) ↗ | ||||
| Linear regression | NIST Longley: fit | algorithm = ols; model type = linear | ✓ Δ 1.1×10-9 (13 digits)33 ↗ | ||||
| Linear regression | NIST Norris: fit | algorithm = ols; model type = linear | ✓ Δ 1.1×10-7 (13 digits) ↗ | ||||
| Linear regression | NIST Pontius: fit | algorithm = ols; degree = 2; model type = polynomial | ✓ Δ 1.6×10-6 (13 digits)34 ↗ | ||||
| Linear regression | NIST SiRstv: fit | algorithm = ols; model type = linear | ✓ Δ 1.0×10-13 (13 digits) ↗ | ||||
| Linear regression | NIST SmLs01: fit | algorithm = ols; model type = linear | ✓ Δ 3.6×10-15 (15+ digits) ↗ | ||||
| Linear regression | NIST SmLs02: fit | algorithm = ols; model type = linear | ✓ Δ 5.7×10-14 (15+ digits) ↗ | ||||
| Linear regression | NIST SmLs03: fit | algorithm = ols; model type = linear | ✓ Δ 9.1×10-13 (15+ digits) ↗ | ||||
| Linear regression | NIST SmLs04: fit | algorithm = ols; model type = linear | ✓ Δ 3.6×10-15 (15+ digits) ↗ | ||||
| Linear regression | NIST SmLs05: fit | algorithm = ols; model type = linear | ✓ Δ 5.7×10-14 (15+ digits) ↗ | ||||
| Linear regression | NIST SmLs06: fit | algorithm = ols; model type = linear | ✓ Δ 4.5×10-13 (15+ digits) ↗ | ||||
| Linear regression | NIST SmLs07: fit | algorithm = ols; model type = linear | ✓ Δ 3.6×10-15 (15+ digits) ↗ | ||||
| Linear regression | NIST SmLs08: fit | algorithm = ols; model type = linear | ✓ Δ 5.7×10-14 (15+ digits) ↗ | ||||
| Linear regression | NIST SmLs09: fit | algorithm = ols; model type = linear | ✓ Δ 4.5×10-13 (15+ digits) ↗ | ||||
| Linear regression | NIST Wampler1: fit | algorithm = ols; degree = 5; model type = polynomial | ✓ Δ 1.5×10-11 (10 digits) ↗ | ||||
| Linear regression | NIST Wampler2: fit | algorithm = ols; degree = 5; model type = polynomial | ✓ Δ 6.4×10-16 (13 digits) ↗ | ||||
| Linear regression | NIST Wampler3: fit | algorithm = ols; degree = 5; model type = polynomial | ✓ Δ 2.8×10-7 (10 digits) ↗ | ||||
| Linear regression | NIST Wampler4: fit | algorithm = ols; degree = 5; model type = polynomial | ✓ Δ 1.2×10-4 (9 digits) ↗ | ||||
| Linear regression | NIST Wampler5: fit | algorithm = ols; degree = 5; model type = polynomial | ✓ Δ 5.9×10-6 (7 digits) ↗ | ||||
| Linear regression | Regression edge | algorithm = ols; imputation = drop; seed = 0; test fraction = 0.5 | ✓ ↗ | ||||
| Linear regression | Regression edge | direction = forward | ✓ exact ↗ | ||||
| Linear regression | Regression setting | default settings | ✓ exact ↗ | ||||
| Linear regression | Regression setting | degree = 2; interactions = no; missing = drop; model type = linear; split percent = 80 | ✓ exact ↗ | ||||
| Linear regression | Regression setting | degree = 3; interactions = no; missing = drop; model type = polynomial; split percent = 100 | ✓ Δ 1.8×10-11 (13 digits) ↗ | ||||
| Linear regression | STAT REG OLS 001 | default settings | ✓ Δ 4.7×10-16 (15+ digits) ↗ | ||||
| Linear regression | STAT REG VIF 001 | degree = 2; interactions = no; missing = drop; model type = linear; split percent = 100 | ✓ Δ 2.7×10-16 (15+ digits) ↗ | ||||
| Linear regression | Stepwise | blocks = x1, x2, x3, x4, x5; casewise = outliers; casewise threshold = 1.5; confidence level = 0.9; criterion = aic | ✓ Δ 1.1×10-13 (13 digits) ↗ | ||||
| Linear regression | Stepwise | criterion = aic; direction = backward | ✓ exact ↗ | ||||
| Linear regression | Stepwise | criterion = aic; direction = both | ✓ exact ↗ | ||||
| Linear regression | Stepwise | criterion = aic; direction = forward | ✓ exact ↗ | ||||
| Linear regression | Stepwise | criterion = bic; direction = backward | ✓ exact ↗ | ||||
| Linear regression | Stepwise | criterion = bic; direction = both | ✓ exact ↗ | ||||
| Linear regression | Stepwise | criterion = bic; direction = forward | ✓ exact ↗ | ||||
| Linear regression | True minimum sample | default settings | ✓ Δ 8.8×10-16 (15+ digits) ↗ | ||||
| Partial least squares regression | Partial least squares regression | bad setting = 1; cv folds = 3; scale = no | ✓ ↗ | ||||
| Partial least squares regression | Partial least squares regression | cv folds = 2; scale = no; seed = 0; test fraction = 0.25 | ✓ exact ↗ | ||||
| Partial least squares regression | Partial least squares regression | cv folds = 3; imputation = drop; scale = no | ✓ exact ↗ | ||||
| Partial least squares regression | Partial least squares regression | cv folds = 3; imputation = mean; scale = no | ✓ exact ↗ | ||||
| Partial least squares regression | Partial least squares regression | cv folds = 3; scale = no | ✓ exact ↗ | ✓ ↗ | |||
| Partial least squares regression | Partial least squares regression | cv folds = 3; scale = yes; seed = 3 | ✓ exact ↗ | ||||
| Partial least squares regression | Partial least squares regression | stored fit supplied | ✓ Δ 6.3×10-10 (10 digits) ↗ | ✓ ↗ | |||
| Partial least squares regression | Partial least squares regression | stored fit supplied; bad setting = 1 | ✓ ↗ | ||||
| Partial least squares regression | Regression edge | cv folds = 2; scale = no; seed = 0; test fraction = 0.25 | ✓ ↗ | ||||
| Partial least squares regression | True minimum sample | cv folds = 2; scale = no; seed = 0; test fraction = 0.2 | ✓ exact ↗ | ||||
| Quantile regression | STAT REG QUANTILE REGRESSION 001 | confidence level = 0.95; dependence = independent; held out evaluation = no; quantiles = 0.5; seed = 0 | ✓ Δ 4.0×10-15 (14 digits) ↗ | ||||
| Quantile regression | STAT REG QUANTILE REGRESSION 002 | confidence level = 0.9; dependence = independent; held out evaluation = no; quantiles = 0.75, 0.25; seed = 3 | ✓ Δ 9.1×10-15 (14 digits) ↗ | ||||
| Quantile regression | STAT REG QUANTILE REGRESSION 003 | confidence level = 0.95; dependence = independent; held out evaluation = no; quantiles = 0.5; seed = 0 | ✓ Δ 7.4×10-15 (15+ digits) ↗ | ||||
| Quantile regression | STAT REG QUANTILE REGRESSION 004 | confidence level = 0.95; dependence = independent; held out evaluation = no; quantiles = 0.5; seed = 0 | ✓ Δ 4.9×10-16 (15+ digits) ↗ | ||||
| Regression with estimated variance weights | STAT REG WEIGHT ESTIMATION 001 | confidence level = 0.95; power from = -2; power step = 0.5; power to = 2 | ✓ Δ 2.9×10-14 (14 digits) ↗ | ||||
| Regression with estimated variance weights | STAT REG WEIGHT ESTIMATION 002 | confidence level = 0.9; power from = -1; power step = 0.25; power to = 2 | ✓ Δ 8.3×10-14 (14 digits) ↗ | ||||
| Regression with estimated variance weights | STAT REG WEIGHT ESTIMATION 003 | confidence level = 0.95; power from = -2; power step = 1; power to = 0 | ✓ Δ 3.6×10-14 (13 digits) ↗ | ||||
| Regression with estimated variance weights | STAT REG WEIGHT ESTIMATION 004 | confidence level = 0.99; power from = -1; power step = 0.5; power to = 2 | ✓ Δ 1.6×10-13 (13 digits) ↗ |
Statistics › Correlation & regression › Generalized & categorical-response models
| Window | Analysis | Settings compared | NIST | R | Analytical | Published example | Independent reviewer |
|---|---|---|---|---|---|---|---|
| Binary regression | Binary regression | event value = event | ✓ ↗ | ||||
| Binary regression | Binary regression | event value = event; threshold = 1 | ✓ ↗ | ||||
| Binary regression | Extreme scale | event value = event | ✓ Δ 1.1×10-13 (15+ digits) ↗ | ||||
| Binary regression | Missing and excluded | event value = event | ✓ Δ 8.7×10-17 (14 digits) ↗ | ||||
| Binary regression | Regression completion | event value = event | ✓ Δ 3.3×10-16 (15+ digits) ↗ | ||||
| Binary regression | Regression completion | event value = event; threshold = 0.0835259 | ✓ Δ 3.4×10-19 (15+ digits) ↗ | ||||
| Binary regression | Regression completion | event value = event; threshold = 0.0840219 | ✓ Δ 2.3×10-19 (15+ digits) ↗ | ||||
| Binary regression | Regression setting | confidence level = 0.9; event value = event; threshold = 0.3 | ✓ Δ 2.2×10-16 (15+ digits) ↗ | ||||
| Binary regression | Regression setting | event value = event | ✓ Δ 8.7×10-16 ↗ | ||||
| Binary regression | STAT REG BINARY 001 | event value = event | ✓ Δ 3.0×10-16 (15+ digits) ↗ | ||||
| Multinomial logistic regression | Extreme scale | reference value = A | ✓ Δ 5.6×10-7 (8 digits) ↗ | ||||
| Multinomial logistic regression | Missing and excluded | reference value = A | ✓ Δ 1.0×10-10 (8 digits) ↗ | ||||
| Multinomial logistic regression | Multinomial logistic regression | confidence level = 1 | ✓ ↗ | ||||
| Multinomial logistic regression | Multinomial logistic regression | default settings | ✓ ↗ | ||||
| Multinomial logistic regression | Multinomial logistic regression | reference value = A | ✓ ↗ | ||||
| Multinomial logistic regression | Regression setting | confidence level = 0.9; reference value = C | ✓ Δ 1.7×10-9 (8 digits) ↗ | ||||
| Multinomial logistic regression | STAT REG NOMINAL 001 | reference value = A | ✓ Δ 7.9×10-11 (6 digits) ↗ | ||||
| Negative binomial regression | Extreme scale | count = nb_count; exposure = exposure | ✓ Δ 1.1×10-10 (13 digits) ↗ | ||||
| Negative binomial regression | Missing and excluded | count = nb_count; exposure = exposure | ✓ Δ 2.6×10-14 (12 digits) ↗ | ||||
| Negative binomial regression | Negative binomial regression | confidence level = 1; count = nb_count | ✓ ↗ | ||||
| Negative binomial regression | Negative binomial regression | count = nb_count | ✓ Δ 4.0×10-13 (12 digits) ↗ | ✓ ↗ | |||
| Negative binomial regression | Negative binomial regression | count = nb_count; exposure = exposure | ✓ ↗ | ||||
| Negative binomial regression | Regression setting | confidence level = 0.9; count = nb_count; exposure = exposure; max rows = 100 | ✓ Δ 2.1×10-13 (12 digits) ↗ | ||||
| Negative binomial regression | Regression setting | count = nb_count; exposure = exposure | ✓ Δ 2.6×10-14 (12 digits) ↗ | ||||
| Negative binomial regression | STAT REG NB 001 | count = nb_count; exposure = exposure | ✓ Δ 2.3×10-12 (10 digits) ↗ | ||||
| Ordinal logistic regression | Extreme scale | level order = low, middle, high | ✓ Δ 1.3×10-4 (6 digits) ↗ | ||||
| Ordinal logistic regression | Missing and excluded | level order = low, middle, high | ✓ Δ 1.6×10-8 (6 digits) ↗ | ||||
| Ordinal logistic regression | Ordinal logistic regression | confidence level = 1 | ✓ ↗ | ||||
| Ordinal logistic regression | Ordinal logistic regression | default settings | ✓ ↗ | ||||
| Ordinal logistic regression | Ordinal logistic regression | level order = low, middle, high | ✓ Δ 2.5×10-7 (7 digits) ↗ | ||||
| Ordinal logistic regression | Regression setting | confidence level = 0.9; level order = low, middle, high | ✓ Δ 1.1×10-7 (6 digits) ↗ | ||||
| Ordinal logistic regression | STAT REG ORDINAL 001 | level order = low, middle, high | ✓ Δ 1.3×10-8 (6 digits) ↗ | ||||
| Other GLM families | Binomial | comparisons = holm; confidence level = 0.95; covariance = hc0; covariates = x; family = binomial; link = probit; lr tests = no; scale = default; trials = trials | ✓ Δ 4.1×10-8 (7 digits) ↗ | ||||
| Other GLM families | Gamma | comparisons = holm; confidence level = 0.95; covariance = model; covariates = x; family = gamma; link = canonical; lr tests = no; scale = default | ✓ Δ 3.8×10-12 (11 digits) ↗ | ||||
| Other GLM families | Gaussian | comparisons = holm; confidence level = 0.95; covariance = model; covariates = x; family = gaussian; link = canonical; lr tests = no; scale = default | ✓ Δ 9.2×10-15 (14 digits) ↗ | ||||
| Other GLM families | Negative binomial | comparisons = holm; confidence level = 0.95; covariance = model; covariates = x; family = negative_binomial; link = canonical; lr tests = no; scale = default; theta = estimate | ✓ Δ 2.0×10-8 (7 digits) ↗ | ||||
| Other GLM families | Poisson | comparisons = holm; confidence level = 0.9; covariance = model; covariates = x; family = poisson; link = canonical; lr tests = yes; offset = log_exposure; scale = default | ✓ Δ 3.0×10-13 (12 digits) ↗ | ||||
| Poisson regression | Extreme scale | default settings | ✓ Δ 1.4×10-7 (10 digits) ↗ | ||||
| Poisson regression | Missing and excluded | default settings | ✓ Δ 2.1×10-11 (9 digits) ↗ | ||||
| Poisson regression | Poisson regression | confidence level = 1 | ✓ ↗ | ||||
| Poisson regression | Poisson regression | default settings | ✓ Δ 8.2×10-9 (9 digits) ↗ | ✓ ↗ | |||
| Poisson regression | Regression setting | confidence level = 0.9 | ✓ Δ 2.3×10-7 (6 digits) ↗ | ||||
| Poisson regression | Regression setting | default settings | ✓ Δ 2.5×10-12 (10 digits) ↗ | ||||
| Poisson regression | STAT REG POISSON 001 | default settings | ✓ Δ 1.4×10-11 (10 digits) ↗ |
Statistics › Correlation & regression › Predictive methods
| Window | Analysis | Settings compared | NIST | R | Analytical | Published example | Independent reviewer |
|---|---|---|---|---|---|---|---|
| Decision trees | CHAID root split on a binary nominal predictor | max depth = 3; min child = 1; min parent = 2; target = late; target kind = categorical | ✓ Δ 1.3×10-23 (15+ digits) ↗ | ||||
| Decision trees | CHAID root split on a three-category nominal predictor | max depth = 3; min child = 1; min parent = 2; target = grade; target kind = categorical | ✓ Δ 2.4×10-27 (15+ digits) ↗ | ||||
| Decision trees | CHAID root split on an ordered three-category predictor | max depth = 3; min child = 1; min parent = 2; ordinal = machine; target = grade; target kind = categorical | ✓ Δ 2.4×10-27 (15+ digits) ↗ | ||||
| Decision trees | CHAID root split with Kass merge/re-split | algorithm = kass_resplit; max depth = 3; min child = 1; min parent = 2; resplit alpha = 0.01; target = grade; target kind = categorical | ✓ Δ 2.4×10-27 (15+ digits) ↗ | ||||
| Decision trees | Decision trees | bad setting = 1; cv folds = 2; depth grid = 1; max depth = 1; min leaf grid = 1 | ✓ ↗ | ||||
| Decision trees | Decision trees | bad setting = 1; cv folds = 2; max depth = 1; min samples leaf = 1; positive class = B; fixed train/test split supplied | ✓ ↗ | ||||
| Decision trees | Decision trees | cv folds = 2; depth grid = 1; max depth = 1; min leaf grid = 1 | ✓ exact ↗ | ✓ ↗ | |||
| Decision trees | Decision trees | cv folds = 2; depth grid = 1; max depth = 1; min leaf grid = 1; seed = 7 | ✓ exact ↗ | ||||
| Decision trees | Decision trees | cv folds = 2; max depth = 1; min samples leaf = 1; positive class = B | ✓ exact ↗ | ✓ ↗ | |||
| Decision trees | Decision trees | cv folds = 2; max depth = 1; min samples leaf = 1; positive class = B; fixed train/test split supplied | ✓ exact ↗ | ||||
| Decision trees | Decision trees | stored fit supplied | ✓ exact ↗ | ✓ ↗ | |||
| Decision trees | Decision trees | stored fit supplied; bad setting = 1 | ✓ ↗ | ||||
| Decision trees | Large-offset retained tree scoring | stored fit supplied | ✓ exact ↗ | ||||
| Decision trees | QUEST root split between two point-mass classes, no pruning | max depth = 5; min child = 1; min parent = 2; prune = no; target = class | ✓ exact ↗ | ||||
| Decision trees | QUEST root split kept by cost-complexity pruning | cv folds = 5; max depth = 5; min child = 1; min parent = 2; prune = yes; target = class | ✓ exact ↗ | ||||
| Decision trees | QUEST root split with equal priors | max depth = 5; min child = 1; min parent = 2; priors = equal; prune = no; target = class | ✓ exact ↗ | ||||
| Decision trees | Regression edge | cv folds = 2; depth grid = 1; max depth = 1; min leaf grid = 1 | ✓ exact ↗ | ||||
| Decision trees | Regression edge | cv folds = 2; max depth = 1; min samples leaf = 1; positive class = B | ✓ ↗ | ||||
| Decision trees | True minimum sample | cv folds = 2; depth grid = 1; max depth = 1; min leaf grid = 1 | ✓ exact ↗ | ||||
| Decision trees | True minimum sample | cv folds = 2; max depth = 1; min samples leaf = 1; positive class = B; fixed train/test split supplied | ✓ exact ↗ | ||||
| Decision trees | True minimum sample | stored fit supplied | ✓ exact ↗ | ||||
| Discriminant analysis | Discriminant analysis | stored fit supplied | ✓ Δ 1.0×10-17 (14 digits) ↗ | ✓ ↗ | |||
| Discriminant analysis | Discriminant analysis | stored fit supplied; bad setting = 1 | ✓ ↗ | ||||
| Discriminant analysis | LDA | bad setting = 1; prior mode = equal; standardize = no | ✓ ↗ | ||||
| Discriminant analysis | LDA | custom priors = 0.7, 0.3; prior mode = custom; standardize = yes | ✓ Δ 4.4×10-18 (15+ digits) ↗ | ||||
| Discriminant analysis | LDA | imputation = drop; prior mode = equal; standardize = no | ✓ exact ↗ | ||||
| Discriminant analysis | LDA | imputation = mean; prior mode = equal; standardize = no | ✓ exact ↗ | ||||
| Discriminant analysis | LDA | prior mode = equal; seed = 0; standardize = no; test fraction = 0.25 | ✓ exact ↗ | ✓ ↗ | |||
| Discriminant analysis | LDA | prior mode = equal; standardize = no | ✓ exact ↗ | ✓ ↗ | |||
| Discriminant analysis | LDA | prior mode = observed; standardize = yes | ✓ exact ↗ | ||||
| Discriminant analysis | QDA | imputation = mean; prior mode = equal; standardize = no | ✓ exact ↗ | ||||
| Discriminant analysis | QDA | prior mode = equal; standardize = no | ✓ exact ↗ | ||||
| Elastic-net logistic regression | STAT REG PENALIZED LOGISTIC 001 | event = fail; independence declared = yes; seed = 20260923; threshold = 0.5 | ✓ Δ 3.5×10-8 (8 digits) ↗ | ||||
| Nearest-neighbour classification & regression | Nearest-neighbour classification of separable clusters | distance = euclidean; features = f1, f2; k values = 1, 3; target = outcome; task = classification | ✓ exact ↗ | ||||
| Nearest-neighbour classification & regression | Nearest-neighbour classification with city-block distance | distance = cityblock; features = f1, f2; k values = 1, 3; target = outcome; task = classification | ✓ exact ↗ | ||||
| Nearest-neighbour classification & regression | Nearest-neighbour regression with constant within-cluster targets | distance = euclidean; features = f1, f2; k values = 1, 3; target = hours; task = regression | ✓ exact ↗ | ||||
| Random forest regression | Regression forest refuses dependent rows | dependence = clustered; seed = 7 | ✓ ↗ | ||||
| Random forest regression | Regression forest study design on independent rows | dependence = independent; seed = 7 | ✓ Δ 1.1×10-18 (15+ digits) ↗ |
Statistics › Distributions & randomness
| Window | Analysis | Settings compared | NIST | R | Analytical | Published example | Independent reviewer |
|---|---|---|---|---|---|---|---|
| Fit & assess distributions | A constant column has no distribution | candidates = normal; origin = 0 | ✓ ↗ | ||||
| Fit & assess distributions | All eight candidates on positive unimodal data | candidates = normal, student_t, laplace, logistic, lognormal, gamma, weibull, exponential; origin = 0 | ✓ Δ 1.8×10-10 (10 digits) ↗ | ||||
| Fit & assess distributions | An unknown candidate is refused | candidates = normal, cauchy; origin = 0 | ✓ ↗ | ||||
| Fit & assess distributions | Anderson darling | default settings | ✓ Δ 1.8×10-15 (13 digits) ↗ | ||||
| Fit & assess distributions | Anderson-Darling statistic of the normal fit | calibration = fixed; candidates = normal; mc samples = 99; origin = 0; seed = 17 | ✓ Δ 2.8×10-16 (15+ digits) ↗ | ||||
| Fit & assess distributions | Bartlett | default settings | ✓ Δ 1.5×10-18 (15+ digits) ↗ | ||||
| Fit & assess distributions | Candidate ranking by BIC then AIC | candidates = normal, laplace, logistic, lognormal, gamma, weibull, exponential; origin = 0 | ✓ Δ 3.6×10-16 (15+ digits) ↗ | ||||
| Fit & assess distributions | Chi square association | default settings | ✓ exact ↗ | ||||
| Fit & assess distributions | Chi square gof | default settings | ✓ exact ↗ | ||||
| Fit & assess distributions | Classic | posthoc = no | ✓ Δ 3.2×10-15 (14 digits) ↗ | ||||
| Fit & assess distributions | Exponential with a value at its origin | candidates = exponential; origin = 0 | ✓ Δ 7.6×10-15 (15+ digits) ↗ | ||||
| Fit & assess distributions | F | default settings | ✓ Δ 6.2×10-15 (14 digits) ↗ | ||||
| Fit & assess distributions | Fisher | success value = yes | ✓ Δ 2.2×10-16 (15+ digits) ↗ | ||||
| Fit & assess distributions | Fixed-origin positive families on 1 to 8 | candidates = lognormal, gamma, weibull, exponential; origin = 0 | ✓ Δ 7.5×10-15 (15+ digits) ↗ | ||||
| Fit & assess distributions | Grubbs | default settings | ✓ Δ 1.4×10-15 (12 digits) ↗ | ||||
| Fit & assess distributions | Hybrid fixed-origin lognormal normality test | calibration = hybrid; candidates = lognormal; origin = 2.5 | ✓ Δ 4.1×10-16 (15+ digits) ↗ | ||||
| Fit & assess distributions | Hybrid normality test with separate sample-SD estimators | calibration = hybrid; candidates = normal; origin = 0 | ✓ Δ 1.2×10-14 (13 digits) ↗ | ||||
| Fit & assess distributions | Kruskal wallis | default settings | ✓ Δ 4.4×10-15 (13 digits) ↗ | ||||
| Fit & assess distributions | Large offset with a small spread | candidates = normal, laplace; origin = 0 | ✓ Δ 3.0×10-7 (8 digits) ↗ | ||||
| Fit & assess distributions | Levene | default settings | ✓ Δ 1.1×10-16 (15+ digits) ↗ | ||||
| Fit & assess distributions | Mann whitney | default settings | ✓ Δ 3.1×10-18 (15+ digits) ↗ | ||||
| Fit & assess distributions | Missing values and excluded rows | candidates = normal, laplace; origin = 0 | ✓ Δ 1.4×10-14 (15+ digits) ↗ | ||||
| Fit & assess distributions | Moods median | default settings | ✓ Δ 3.0×10-15 (14 digits) ↗ | ||||
| Fit & assess distributions | One proportion | success value = yes; target = 0.4 | ✓ Δ 2.8×10-16 (15+ digits) ↗ | ||||
| Fit & assess distributions | One sample t | alpha = 0 | ✓ ↗ | ||||
| Fit & assess distributions | One sample t | alpha = 0.1; target = 0 | ✓ Δ 3.9×10-18 (15+ digits) ↗ | ||||
| Fit & assess distributions | One sample t | alpha = 0.1; target = 5.96 | ✓ Δ 2.0×10-15 (13 digits) ↗ | ||||
| Fit & assess distributions | One sample t | alpha = 0.1; target = 5.97688 | ✓ Δ 3.0×10-16 (14 digits) ↗ | ||||
| Fit & assess distributions | One sample t | alternative = greater; target = 6.2 | ✓ Δ 1.6×10-15 (14 digits) ↗ | ||||
| Fit & assess distributions | One sample t | alternative = less; target = 6.2 | ✓ Δ 1.6×10-15 (14 digits) ↗ | ||||
| Fit & assess distributions | One sample t | alternative = two-sided; target = 6.2 | ✓ Δ 1.6×10-15 (14 digits) ⟨R⟩ ↗ | ||||
| Fit & assess distributions | One sample t | default settings | ✓ ↗ | ||||
| Fit & assess distributions | One sample t | target = 0 | ✓ Δ 4.8×10-16 (15+ digits) ↗ | ✓ ↗ | |||
| Fit & assess distributions | One sample t | target = 1000000006 | ✓ Δ 1.1×10-8 (7 digits) ↗ | ||||
| Fit & assess distributions | One sample t | target = 6 | ✓ Δ 2.6×10-15 (14 digits) ↗ | ||||
| Fit & assess distributions | One way ANOVA | posthoc = yes | ✓ Δ 7.1×10-15 (14 digits) ↗ | ||||
| Fit & assess distributions | Paired t | default settings | ✓ Δ 1.5×10-14 (13 digits) ⟨R⟩ ↗ | ||||
| Fit & assess distributions | Pooled | default settings | ✓ Δ 8.9×10-16 (14 digits) ↗ | ||||
| Fit & assess distributions | Positive families at a declared origin of 2.5 | candidates = lognormal, gamma, weibull, exponential; origin = 2.5 | ✓ Δ 1.4×10-14 (15+ digits) ↗ | ||||
| Fit & assess distributions | Positive families skipped for a value at the origin | candidates = normal, lognormal, gamma; origin = 0 | ✓ Δ 3.9×10-15 (15+ digits) ↗ | ||||
| Fit & assess distributions | Seven values are below the minimum | candidates = normal; origin = 0 | ✓ ↗ | ||||
| Fit & assess distributions | Shapiro wilk | default settings | ✓ Δ 2.2×10-16 (15+ digits) ↗ | ||||
| Fit & assess distributions | Sign | default settings | ✓ Δ 6.4×10-21 (15+ digits) ↗ | ||||
| Fit & assess distributions | Smallest accepted sample of eight | candidates = normal, exponential; origin = 0 | ✓ Δ 3.7×10-15 (15+ digits) ↗ | ||||
| Fit & assess distributions | Two way ANOVA | posthoc = no | ✓ Δ 5.7×10-15 (12 digits) ↗ | ||||
| Fit & assess distributions | Unrestricted Student t is refused | candidates = student_t; origin = 0 | ✓ ↗ | ||||
| Fit & assess distributions | Unsupported | default settings | ✓ ↗ | ||||
| Fit & assess distributions | Welch | default settings | ✓ Δ 6.6×10-15 (15+ digits) ⟨R⟩ ↗ | ||||
| Fit & assess distributions | Welch | posthoc = no | ✓ Δ 2.6×10-15 (14 digits) ↗ | ||||
| Fit & assess distributions | Wilcoxon | default settings | ✓ exact ↗ | ||||
| Fit & assess distributions | Z | success value = yes | ✓ Δ 5.8×10-17 (15+ digits) ↗ | ||||
| Outlier test - Grubbs | Anderson darling | default settings | ✓ Δ 1.8×10-15 (13 digits) ↗ | ||||
| Outlier test - Grubbs | Grubbs | default settings | ✓ Δ 1.4×10-15 (12 digits) ↗ | ||||
| Outlier test - Grubbs | Shapiro wilk | default settings | ✓ Δ 2.2×10-16 (15+ digits) ↗ | ||||
| Runs test for sequence randomness | Friedman | alternative = less | ✓ ↗ | ||||
| Runs test for sequence randomness | Friedman | default settings | ✓ Δ 3.1×10-18 (15+ digits) ↗ | ✓ ↗ | |||
| Runs test for sequence randomness | Friedman | max blocks = 10; max rows = 100 | ✓ Δ 2.3×10-18 (15+ digits) ↗ | ||||
| Runs test for sequence randomness | Runs | alternative = greater; inference = exact; reference mode = fixed; reference value = 6 | ✓ Δ 1.4×10-18 (15+ digits) ↗ | ||||
| Runs test for sequence randomness | Runs | alternative = less; inference = exact; reference mode = fixed; reference value = 6 | ✓ Δ 1.0×10-19 (15+ digits) ↗ | ||||
| Runs test for sequence randomness | Runs | alternative = two-sided; inference = asymptotic; max exact n = 20; reference mode = median | ✓ Δ 1.7×10-18 (15+ digits) ↗ | ||||
| Runs test for sequence randomness | Runs | default settings | ✓ ↗ | ||||
| Runs test for sequence randomness | Runs | inference = asymptotic | ✓ Δ 1.7×10-18 (15+ digits) ↗ | ||||
| Runs test for sequence randomness | Runs | inference = asymptotic; reference mode = median | ✓ ↗ |
Statistics › Group comparisons & ANOVA
| Window | Analysis | Settings compared | NIST | R | Analytical | Published example | Independent reviewer |
|---|---|---|---|---|---|---|---|
| Analysis of means (ANOM) | Binomial | alpha = 0.05; analysis = binomial; events = events; trials = trials | ✓ Δ 8.0×10-14 (13 digits) ↗ | ||||
| Analysis of means (ANOM) | Normal one way | alpha = 0.01; analysis = normal_one_way | ✓ Δ 5.3×10-14 (13 digits) ↗ | ||||
| Analysis of means (ANOM) | Normal one way | alpha = 0.05; analysis = normal_one_way | ✓ Δ 3.9×10-14 (13 digits) ↗ | ||||
| Analysis of means (ANOM) | Normal two way | alpha = 0.05; analysis = normal_two_way | ✓ Δ 1.1×10-14 (13 digits) ↗ | ||||
| Analysis of means (ANOM) | Poisson | alpha = 0.05; analysis = poisson; events = counts; exposure = exposure; exposure unit = hour | ✓ Δ 9.3×10-16 (15+ digits) ↗ | ||||
| Compare group distributions | Bartlett | default settings | ✓ Δ 1.5×10-18 (15+ digits) ↗ | ||||
| Compare group distributions | Chi square association | default settings | ✓ exact ↗ | ||||
| Compare group distributions | Chi square gof | default settings | ✓ exact ↗ | ||||
| Compare group distributions | Classic | posthoc = no | ✓ Δ 3.2×10-15 (14 digits) ↗ | ||||
| Compare group distributions | F | default settings | ✓ Δ 6.2×10-15 (14 digits) ↗ | ||||
| Compare group distributions | Fisher | success value = yes | ✓ Δ 2.2×10-16 (15+ digits) ↗ | ||||
| Compare group distributions | Kruskal wallis | default settings | ✓ Δ 4.4×10-15 (13 digits) ↗ | ||||
| Compare group distributions | Levene | default settings | ✓ Δ 1.1×10-16 (15+ digits) ↗ | ||||
| Compare group distributions | Mann whitney | default settings | ✓ Δ 3.1×10-18 (15+ digits) ↗ | ||||
| Compare group distributions | Moods median | default settings | ✓ Δ 3.0×10-15 (14 digits) ↗ | ||||
| Compare group distributions | One proportion | success value = yes; target = 0.4 | ✓ Δ 2.8×10-16 (15+ digits) ↗ | ||||
| Compare group distributions | One sample t | alpha = 0 | ✓ ↗ | ||||
| Compare group distributions | One sample t | alpha = 0.1; target = 0 | ✓ Δ 3.9×10-18 (15+ digits) ↗ | ||||
| Compare group distributions | One sample t | alpha = 0.1; target = 5.96 | ✓ Δ 2.0×10-15 (13 digits) ↗ | ||||
| Compare group distributions | One sample t | alpha = 0.1; target = 5.97688 | ✓ Δ 3.0×10-16 (14 digits) ↗ | ||||
| Compare group distributions | One sample t | alternative = greater; target = 6.2 | ✓ Δ 1.6×10-15 (14 digits) ↗ | ||||
| Compare group distributions | One sample t | alternative = less; target = 6.2 | ✓ Δ 1.6×10-15 (14 digits) ↗ | ||||
| Compare group distributions | One sample t | alternative = two-sided; target = 6.2 | ✓ Δ 1.6×10-15 (14 digits) ⟨R⟩ ↗ | ||||
| Compare group distributions | One sample t | default settings | ✓ ↗ | ||||
| Compare group distributions | One sample t | target = 0 | ✓ Δ 4.8×10-16 (15+ digits) ↗ | ✓ ↗ | |||
| Compare group distributions | One sample t | target = 1000000006 | ✓ Δ 1.1×10-8 (7 digits) ↗ | ||||
| Compare group distributions | One sample t | target = 6 | ✓ Δ 2.6×10-15 (14 digits) ↗ | ||||
| Compare group distributions | One way ANOVA | posthoc = yes | ✓ Δ 7.1×10-15 (14 digits) ↗ | ||||
| Compare group distributions | Paired t | default settings | ✓ Δ 1.5×10-14 (13 digits) ⟨R⟩ ↗ | ||||
| Compare group distributions | Pooled | default settings | ✓ Δ 8.9×10-16 (14 digits) ↗ | ||||
| Compare group distributions | Sign | default settings | ✓ Δ 6.4×10-21 (15+ digits) ↗ | ||||
| Compare group distributions | Two way ANOVA | posthoc = no | ✓ Δ 5.7×10-15 (12 digits) ↗ | ||||
| Compare group distributions | Unsupported | default settings | ✓ ↗ | ||||
| Compare group distributions | Welch | default settings | ✓ Δ 6.6×10-15 (15+ digits) ⟨R⟩ ↗ | ||||
| Compare group distributions | Welch | posthoc = no | ✓ Δ 2.6×10-15 (14 digits) ↗ | ||||
| Compare group distributions | Wilcoxon | default settings | ✓ exact ↗ | ||||
| Compare group distributions | Z | success value = yes | ✓ Δ 5.8×10-17 (15+ digits) ↗ | ||||
| Equivalence tests | Additional configuration coverage | alpha = 0.1; lower bound = -2; max cells = 1000; max rows = 100; mode = one_sample_difference; target = 6; upper bound = 2 | ✓ Δ 1.1×10-16 (14 digits) ↗ | ||||
| Equivalence tests | Additional configuration coverage | alpha = 0.1; lower bound = -3; max cells = 1000; max rows = 100; upper bound = 3 | ✓ Δ 8.8×10-16 (14 digits) ↗ | ||||
| Equivalence tests | Below minimum: One response in each group is below the Welch TOST minimum. | lower bound = -2; upper bound = 2 | ✓ ↗ | ||||
| Equivalence tests | Below minimum: One retained response is below the one-sample TOST minimum. | lower bound = -2; mode = one_sample_difference; target = 0; upper bound = 2 | ✓ ↗ | ||||
| Equivalence tests | Decision threshold | alpha = 0.1; lower bound = -2.7781; upper bound = -0.371895 | ✓ Δ 5.0×10-16 (14 digits) ↗ | ||||
| Equivalence tests | Decision threshold | alpha = 0.1; lower bound = -2.80241; upper bound = -0.34759 | ✓ Δ 5.8×10-16 (14 digits) ↗ | ||||
| Equivalence tests | Decision threshold | alpha = 0.1; lower bound = 0.160571; mode = one_sample_difference; target = 6; upper bound = 1.46443 | ✓ Δ 8.3×10-16 (14 digits) ↗ | ||||
| Equivalence tests | Decision threshold | alpha = 0.1; lower bound = 0.17348; mode = one_sample_difference; target = 6; upper bound = 1.45152 | ✓ Δ 2.4×10-16 (14 digits) ↗ | ||||
| Equivalence tests | Equivalence tests | alpha = 0.1; lower bound = -3; max rows = 100; mode = one_sample_difference; target = 1.5; upper bound = 3 | ✓ Δ 1.4×10-17 (15+ digits) ↗ | ||||
| Equivalence tests | Equivalence tests | alpha = 0.1; lower bound = -3; max rows = 100; upper bound = 3 | ✓ Δ 7.3×10-18 (15+ digits) ↗ | ||||
| Equivalence tests | Equivalence tests | lower bound = -1; mode = one_sample_difference; target = 1; upper bound = 1 | ✓ ↗ | ||||
| Equivalence tests | Equivalence tests | lower bound = -1; upper bound = 1 | ✓ ↗ | ||||
| Equivalence tests | Equivalence tests | lower bound = -2; mode = paired_difference; upper bound = 2 | ✓ Δ 2.0×10-18 (13 digits) ↗ | ✓ ↗ | |||
| Equivalence tests | Equivalence tests | lower bound = -2; upper bound = 2 | ✓ ↗ | ||||
| Equivalence tests | Equivalence tests | lower bound = 0.8; mode = paired_log_ratio; upper bound = 1.25 | ✓ Δ 2.8×10-17 (14 digits) ↗ | ||||
| Equivalence tests | Equivalence tests | lower bound = 2; mode = one_sample_difference; target = 6; upper bound = -2 | ✓ ↗ | ||||
| Equivalence tests | Equivalence tests | lower bound = 2; upper bound = -2 | ✓ ↗ | ||||
| Equivalence tests | Large-offset numerical case | lower bound = -2; mode = one_sample_difference; target = 1000000006; upper bound = 2 | ✓ Δ 3.1×10-18 (15+ digits) ↗ | ||||
| Equivalence tests | Large-offset numerical case | lower bound = -3; upper bound = 3 | ✓ Δ 5.6×10-17 (15+ digits) ↗ | ||||
| Equivalence tests | Missing and excluded population | lower bound = -2; mode = one_sample_difference; target = 6; upper bound = 2 | ✓ Δ 4.3×10-17 (14 digits) ↗ | ||||
| Equivalence tests | Missing and excluded population | lower bound = -3; upper bound = 3 | ✓ Δ 8.9×10-16 (14 digits) ↗ | ||||
| Equivalence tests | One-sample difference TOST | lower bound = -2; mode = one_sample_difference; target = 6; upper bound = 2 | ✓ Δ 1.2×10-16 (14 digits) ↗ | ||||
| Equivalence tests | Welch two-group TOST | lower bound = -3; upper bound = 3 | ✓ Δ 1.9×10-15 (13 digits) ↗ | ||||
| Factorial ANOVA & ANCOVA | Bartlett | default settings | ✓ Δ 1.5×10-18 (15+ digits) ↗ | ||||
| Factorial ANOVA & ANCOVA | Chi square association | default settings | ✓ exact ↗ | ||||
| Factorial ANOVA & ANCOVA | Chi square gof | default settings | ✓ exact ↗ | ||||
| Factorial ANOVA & ANCOVA | Classic | posthoc = no | ✓ Δ 3.2×10-15 (14 digits) ↗ | ||||
| Factorial ANOVA & ANCOVA | Extreme scale | default settings | ✓ Δ 9.4×10-6 (15+ digits) ↗ | ||||
| Factorial ANOVA & ANCOVA | Extreme scale | test type = III | ✓ Δ 9.4×10-6 (15+ digits) ↗ | ||||
| Factorial ANOVA & ANCOVA | F | default settings | ✓ Δ 6.2×10-15 (14 digits) ↗ | ||||
| Factorial ANOVA & ANCOVA | Factorial ANOVA & ANCOVA | confidence level = 1 | ✓ ↗ | ||||
| Factorial ANOVA & ANCOVA | Factorial ANOVA & ANCOVA | default settings | ✓ Δ 1.0×10-15 (13 digits) ↗ | ✓ ↗ | |||
| Factorial ANOVA & ANCOVA | Fisher | success value = yes | ✓ Δ 2.2×10-16 (15+ digits) ↗ | ||||
| Factorial ANOVA & ANCOVA | Kruskal wallis | default settings | ✓ Δ 4.4×10-15 (13 digits) ↗ | ||||
| Factorial ANOVA & ANCOVA | Levene | default settings | ✓ Δ 1.1×10-16 (15+ digits) ↗ | ||||
| Factorial ANOVA & ANCOVA | Mann whitney | default settings | ✓ Δ 3.1×10-18 (15+ digits) ↗ | ||||
| Factorial ANOVA & ANCOVA | Missing and excluded | default settings | ✓ Δ 5.3×10-17 (15+ digits) ↗ | ||||
| Factorial ANOVA & ANCOVA | Missing and excluded | test type = III | ✓ Δ 2.5×10-17 (15+ digits) ↗ | ||||
| Factorial ANOVA & ANCOVA | Moods median | default settings | ✓ Δ 3.0×10-15 (14 digits) ↗ | ||||
| Factorial ANOVA & ANCOVA | NIST AtmWtAg: general linear | default settings | ✓ Δ 3.5×10-14 (14 digits) ↗ | ||||
| Factorial ANOVA & ANCOVA | NIST AtmWtAg: linear effects | default settings | ✓ Δ 2.8×10-14 (14 digits) ↗ | ||||
| Factorial ANOVA & ANCOVA | NIST Norris: general linear | default settings | ✓ Δ 1.2×10-7 (12 digits) ↗ | ||||
| Factorial ANOVA & ANCOVA | NIST Norris: linear effects | default settings | ✓ Δ 7.2×10-8 (12 digits) ↗ | ||||
| Factorial ANOVA & ANCOVA | NIST SiRstv: general linear | default settings | ✓ Δ 1.0×10-13 (13 digits) ↗ | ||||
| Factorial ANOVA & ANCOVA | NIST SiRstv: linear effects | default settings | ✓ Δ 1.0×10-13 (13 digits) ↗ | ||||
| Factorial ANOVA & ANCOVA | NIST SmLs01: general linear | default settings | ✓ Δ 1.4×10-14 (15+ digits) ↗ | ||||
| Factorial ANOVA & ANCOVA | NIST SmLs01: linear effects | default settings | ✓ Δ 6.0×10-16 (15+ digits) ↗ | ||||
| Factorial ANOVA & ANCOVA | NIST SmLs02: general linear | default settings | ✓ Δ 3.7×10-13 (14 digits) ↗ | ||||
| Factorial ANOVA & ANCOVA | NIST SmLs02: linear effects | default settings | ✓ Δ 2.6×10-13 (14 digits) ↗ | ||||
| Factorial ANOVA & ANCOVA | NIST SmLs03: general linear | default settings | ✓ Δ 2.6×10-11 (13 digits) ↗ | ||||
| Factorial ANOVA & ANCOVA | NIST SmLs03: linear effects | default settings | ✓ Δ 2.0×10-11 (13 digits) ↗ | ||||
| Factorial ANOVA & ANCOVA | NIST SmLs04: general linear | default settings | ✓ Δ 2.8×10-14 (14 digits) ↗ | ||||
| Factorial ANOVA & ANCOVA | NIST SmLs04: linear effects | default settings | ✓ Δ 6.2×10-17 (15+ digits) ↗ | ||||
| Factorial ANOVA & ANCOVA | NIST SmLs05: general linear | default settings | ✓ Δ 3.4×10-13 (14 digits) ↗ | ||||
| Factorial ANOVA & ANCOVA | NIST SmLs05: linear effects | default settings | ✓ Δ 8.5×10-14 (15+ digits) ↗ | ||||
| Factorial ANOVA & ANCOVA | NIST SmLs06: general linear | default settings | ✓ Δ 2.5×10-11 (13 digits) ↗ | ||||
| Factorial ANOVA & ANCOVA | NIST SmLs06: linear effects | default settings | ✓ Δ 1.5×10-11 (14 digits) ↗ | ||||
| Factorial ANOVA & ANCOVA | NIST SmLs07: general linear | default settings | ✓ Δ 2.8×10-14 (14 digits) ↗ | ||||
| Factorial ANOVA & ANCOVA | NIST SmLs07: linear effects | default settings | ✓ Δ 6.2×10-17 (15+ digits) ↗ | ||||
| Factorial ANOVA & ANCOVA | NIST SmLs08: general linear | default settings | ✓ Δ 3.4×10-13 (14 digits) ↗ | ||||
| Factorial ANOVA & ANCOVA | NIST SmLs08: linear effects | default settings | ✓ Δ 8.5×10-14 (15+ digits) ↗ | ||||
| Factorial ANOVA & ANCOVA | NIST SmLs09: general linear | default settings | ✓ Δ 2.5×10-11 (13 digits) ↗ | ||||
| Factorial ANOVA & ANCOVA | NIST SmLs09: linear effects | default settings | ✓ Δ 1.5×10-11 (14 digits) ↗ | ||||
| Factorial ANOVA & ANCOVA | One proportion | success value = yes; target = 0.4 | ✓ Δ 2.8×10-16 (15+ digits) ↗ | ||||
| Factorial ANOVA & ANCOVA | One sample t | alpha = 0 | ✓ ↗ | ||||
| Factorial ANOVA & ANCOVA | One sample t | alpha = 0.1; target = 0 | ✓ Δ 3.9×10-18 (15+ digits) ↗ | ||||
| Factorial ANOVA & ANCOVA | One sample t | alpha = 0.1; target = 5.96 | ✓ Δ 2.0×10-15 (13 digits) ↗ | ||||
| Factorial ANOVA & ANCOVA | One sample t | alpha = 0.1; target = 5.97688 | ✓ Δ 3.0×10-16 (14 digits) ↗ | ||||
| Factorial ANOVA & ANCOVA | One sample t | alternative = greater; target = 6.2 | ✓ Δ 1.6×10-15 (14 digits) ↗ | ||||
| Factorial ANOVA & ANCOVA | One sample t | alternative = less; target = 6.2 | ✓ Δ 1.6×10-15 (14 digits) ↗ | ||||
| Factorial ANOVA & ANCOVA | One sample t | alternative = two-sided; target = 6.2 | ✓ Δ 1.6×10-15 (14 digits) ⟨R⟩ ↗ | ||||
| Factorial ANOVA & ANCOVA | One sample t | default settings | ✓ ↗ | ||||
| Factorial ANOVA & ANCOVA | One sample t | target = 0 | ✓ Δ 4.8×10-16 (15+ digits) ↗ | ✓ ↗ | |||
| Factorial ANOVA & ANCOVA | One sample t | target = 1000000006 | ✓ Δ 1.1×10-8 (7 digits) ↗ | ||||
| Factorial ANOVA & ANCOVA | One sample t | target = 6 | ✓ Δ 2.6×10-15 (14 digits) ↗ | ||||
| Factorial ANOVA & ANCOVA | One way ANOVA | posthoc = yes | ✓ Δ 7.1×10-15 (14 digits) ↗ | ||||
| Factorial ANOVA & ANCOVA | Paired t | default settings | ✓ Δ 1.5×10-14 (13 digits) ⟨R⟩ ↗ | ||||
| Factorial ANOVA & ANCOVA | Pooled | default settings | ✓ Δ 8.9×10-16 (14 digits) ↗ | ||||
| Factorial ANOVA & ANCOVA | Regression completion | interactions = group, x; test type = II | ✓ Δ 2.8×10-14 (14 digits) ↗ | ||||
| Factorial ANOVA & ANCOVA | Regression completion | max rows = 100 | ✓ Δ 2.2×10-16 (15+ digits) ↗ | ||||
| Factorial ANOVA & ANCOVA | Regression setting | confidence level = 0.95; max rows = 100 | ✓ Δ 1.4×10-15 (15+ digits) ↗ | ||||
| Factorial ANOVA & ANCOVA | Regression setting | confidence level = 0.9; max rows = 100 | ✓ ↗ | ||||
| Factorial ANOVA & ANCOVA | Regression setting | default settings | ✓ Δ 5.8×10-17 (15+ digits) ↗ | ||||
| Factorial ANOVA & ANCOVA | Regression setting | terms = kind interaction, columns x, z | ✓ Δ 2.8×10-17 (15+ digits) ↗ | ||||
| Factorial ANOVA & ANCOVA | Regression setting | terms = kind main, columns x | ✓ Δ 2.0×10-16 (15+ digits) ↗ | ||||
| Factorial ANOVA & ANCOVA | Regression setting | terms = kind nested, columns group, child | ✓ Δ 2.3×10-17 (15+ digits) ↗ | ||||
| Factorial ANOVA & ANCOVA | Regression setting | terms = kind quadratic, columns x | ✓ Δ 1.4×10-16 (13 digits) ↗ | ||||
| Factorial ANOVA & ANCOVA | Regression setting | test type = II | ✓ Δ 1.4×10-14 (15+ digits) ↗ | ||||
| Factorial ANOVA & ANCOVA | Regression setting | test type = III | ✓ Δ 2.5×10-17 (15+ digits) ↗ | ||||
| Factorial ANOVA & ANCOVA | STAT REG EFFECTS 001 | default settings | ✓ Δ 2.2×10-18 (15+ digits) ↗ | ||||
| Factorial ANOVA & ANCOVA | STAT REG GENERAL 001 | test type = III | ✓ Δ 2.3×10-18 (15+ digits) ↗ | ||||
| Factorial ANOVA & ANCOVA | Sign | default settings | ✓ Δ 6.4×10-21 (15+ digits) ↗ | ||||
| Factorial ANOVA & ANCOVA | Two way ANOVA | posthoc = no | ✓ Δ 5.7×10-15 (12 digits) ↗ | ||||
| Factorial ANOVA & ANCOVA | Unsupported | default settings | ✓ ↗ | ||||
| Factorial ANOVA & ANCOVA | Welch | default settings | ✓ Δ 6.6×10-15 (15+ digits) ⟨R⟩ ↗ | ||||
| Factorial ANOVA & ANCOVA | Welch | posthoc = no | ✓ Δ 2.6×10-15 (14 digits) ↗ | ||||
| Factorial ANOVA & ANCOVA | Wilcoxon | default settings | ✓ exact ↗ | ||||
| Factorial ANOVA & ANCOVA | Z | success value = yes | ✓ Δ 5.8×10-17 (15+ digits) ↗ | ||||
| Multivariate ANOVA (MANOVA) | Missing and excluded multivariate population | default settings | ✓ Δ 9.9×10-18 (15+ digits) ↗ | ||||
| Multivariate ANOVA (MANOVA) | Multivariate | default settings | ✓ Δ 6.6×10-16 (12 digits) ↗ | ||||
| Multivariate ANOVA (MANOVA) | Multivariate ANOVA (MANOVA) | confidence level = 0.2 | ✓ ↗ | ||||
| Multivariate ANOVA (MANOVA) | Multivariate ANOVA (MANOVA) | default settings | ✓ Δ 7.3×10-11 (10 digits) ↗ | ✓ ↗ | |||
| Multivariate ANOVA (MANOVA) | Multivariate option | test type = II | ✓ Δ 6.6×10-16 (12 digits) ↗ | ||||
| One-sample mean | Bartlett | default settings | ✓ Δ 1.5×10-18 (15+ digits) ↗ | ||||
| One-sample mean | Chi square association | default settings | ✓ exact ↗ | ||||
| One-sample mean | Chi square gof | default settings | ✓ exact ↗ | ||||
| One-sample mean | Classic | posthoc = no | ✓ Δ 3.2×10-15 (14 digits) ↗ | ||||
| One-sample mean | F | default settings | ✓ Δ 6.2×10-15 (14 digits) ↗ | ||||
| One-sample mean | Fisher | success value = yes | ✓ Δ 2.2×10-16 (15+ digits) ↗ | ||||
| One-sample mean | Known sigma Z | alpha = 0.1; alternative = greater; confidence level = 0.9; known sigma = 2; max rows = 100; null mean = 6 | ✓ Δ 3.4×10-17 (15+ digits) ↗ | ||||
| One-sample mean | Known sigma Z | alpha = 0.1; alternative = less; confidence level = 0.9; known sigma = 2; max rows = 100; null mean = 6 | ✓ Δ 1.3×10-18 (15+ digits) ↗ | ||||
| One-sample mean | Known sigma Z | alpha = 0.1; known sigma = 1; max rows = 100; null mean = 0 | ✓ Δ 3.5×10-17 (15+ digits) ↗ | ||||
| One-sample mean | Known sigma Z | alpha = 0; known sigma = 2; null mean = 6 | ✓ ↗ | ||||
| One-sample mean | Known sigma Z | input kind = raw; known sigma = 2; null mean = 6 | ✓ Δ 6.7×10-17 (15+ digits) ↗ | ||||
| One-sample mean | Known sigma Z | input kind = summary; known sigma = 2; null mean = 6; sample size = 16; summary mean = 6.8125 | ✓ Δ 6.7×10-17 (15+ digits) ↗ | ||||
| One-sample mean | Known sigma Z | known sigma = 0; null mean = 6 | ✓ ↗ | ||||
| One-sample mean | Known sigma Z | known sigma = 2; null mean = 1000000006 | ✓ Δ 6.7×10-17 (15+ digits) ↗ | ||||
| One-sample mean | Known sigma Z | known sigma = 2; null mean = 6 | ✓ Δ 4.0×10-18 (15+ digits) ↗ | ||||
| One-sample mean | Kruskal wallis | default settings | ✓ Δ 4.4×10-15 (13 digits) ↗ | ||||
| One-sample mean | Levene | default settings | ✓ Δ 1.1×10-16 (15+ digits) ↗ | ||||
| One-sample mean | Mann whitney | default settings | ✓ Δ 3.1×10-18 (15+ digits) ↗ | ||||
| One-sample mean | Moods median | default settings | ✓ Δ 3.0×10-15 (14 digits) ↗ | ||||
| One-sample mean | One poisson rate | alternative = greater; null rate = 0.15 | ✓ Δ 2.3×10-16 (15+ digits) ↗ | ||||
| One-sample mean | One poisson rate | alternative = less; null rate = 0.15 | ✓ Δ 1.1×10-16 (15+ digits) ↗ | ||||
| One-sample mean | One poisson rate | exposure unit = hours; input kind = raw; null rate = 0.15 | ✓ Δ 4.4×10-18 (15+ digits) ↗ | ||||
| One-sample mean | One poisson rate | input kind = summary; null rate = 0.15; summary count = 12; summary exposure = 80 | ✓ Δ 4.4×10-18 (15+ digits) ↗ | ||||
| One-sample mean | One poisson rate | null rate = 0.1 | ✓ Δ 7.1×10-18 (15+ digits) ↗ | ||||
| One-sample mean | One proportion | success value = yes; target = 0.4 | ✓ Δ 2.8×10-16 (15+ digits) ↗ | ||||
| One-sample mean | One sample t | alpha = 0 | ✓ ↗ | ||||
| One-sample mean | One sample t | alpha = 0.1; target = 0 | ✓ Δ 3.9×10-18 (15+ digits) ↗ | ||||
| One-sample mean | One sample t | alpha = 0.1; target = 5.96 | ✓ Δ 2.0×10-15 (13 digits) ↗ | ||||
| One-sample mean | One sample t | alpha = 0.1; target = 5.97688 | ✓ Δ 3.0×10-16 (14 digits) ↗ | ||||
| One-sample mean | One sample t | alternative = greater; target = 6.2 | ✓ Δ 1.6×10-15 (14 digits) ↗ | ||||
| One-sample mean | One sample t | alternative = less; target = 6.2 | ✓ Δ 1.6×10-15 (14 digits) ↗ | ||||
| One-sample mean | One sample t | alternative = two-sided; target = 6.2 | ✓ Δ 1.6×10-15 (14 digits) ⟨R⟩ ↗ | ||||
| One-sample mean | One sample t | default settings | ✓ ↗ | ||||
| One-sample mean | One sample t | target = 0 | ✓ Δ 4.8×10-16 (15+ digits) ↗ | ✓ ↗ | |||
| One-sample mean | One sample t | target = 1000000006 | ✓ Δ 1.1×10-8 (7 digits) ↗ | ||||
| One-sample mean | One sample t | target = 6 | ✓ Δ 2.6×10-15 (14 digits) ↗ | ||||
| One-sample mean | One variance chi square | alternative = greater; null variance = 4 | ✓ Δ 3.3×10-15 (15+ digits) ↗ | ||||
| One-sample mean | One variance chi square | alternative = less; null variance = 4 | ✓ Δ 3.3×10-15 (15+ digits) ↗ | ||||
| One-sample mean | One variance chi square | input kind = raw; null variance = 4; variance display = sd | ✓ Δ 3.3×10-15 (15+ digits) ↗ | ||||
| One-sample mean | One variance chi square | input kind = summary; null variance = 4; sample size = 16; summary variance = 3.70917 | ✓ Δ 1.2×10-14 (14 digits) ↗ | ||||
| One-sample mean | One variance chi square | null variance = 1 | ✓ ↗ | ||||
| One-sample mean | One way ANOVA | posthoc = yes | ✓ Δ 7.1×10-15 (14 digits) ↗ | ||||
| One-sample mean | Paired t | default settings | ✓ Δ 1.5×10-14 (13 digits) ⟨R⟩ ↗ | ||||
| One-sample mean | Pooled | default settings | ✓ Δ 8.9×10-16 (14 digits) ↗ | ||||
| One-sample mean | Sign | default settings | ✓ Δ 6.4×10-21 (15+ digits) ↗ | ||||
| One-sample mean | Two poisson rate | alternative = greater; input kind = summary; null ratio = 1; summary count = 4; summary count 2 = 8; summary exposure = 38; summary exposure 2 = 42 | ✓ Δ 1.1×10-16 (15+ digits) ↗ | ||||
| One-sample mean | Two poisson rate | alternative = greater; null ratio = 1 | ✓ Δ 1.1×10-16 (15+ digits) ↗ | ||||
| One-sample mean | Two poisson rate | alternative = less; null ratio = 1 | ✓ Δ 3.6×10-18 (15+ digits) ↗ | ||||
| One-sample mean | Two poisson rate | exposure unit = days; input kind = raw; null ratio = 1 | ✓ Δ 5.2×10-17 (15+ digits) ↗ | ||||
| One-sample mean | Two way ANOVA | posthoc = no | ✓ Δ 5.7×10-15 (12 digits) ↗ | ||||
| One-sample mean | Unsupported | default settings | ✓ ↗ | ||||
| One-sample mean | Welch | default settings | ✓ Δ 6.6×10-15 (15+ digits) ⟨R⟩ ↗ | ||||
| One-sample mean | Welch | posthoc = no | ✓ Δ 2.6×10-15 (14 digits) ↗ | ||||
| One-sample mean | Wilcoxon | default settings | ✓ exact ↗ | ||||
| One-sample mean | Z | success value = yes | ✓ Δ 5.8×10-17 (15+ digits) ↗ | ||||
| One-way ANOVA | One-way ANOVA Bonferroni | alpha = 0.05; procedure = bonferroni | ✓ Δ 4.6×10-14 (13 digits) ↗ | ||||
| One-way ANOVA | One-way ANOVA Dunnett against control A | alpha = 0.05; control = A; procedure = dunnett | ✓ Δ 1.9×10-5 (4 digits) ↗ | ||||
| One-way ANOVA | One-way ANOVA Games-Howell | alpha = 0.05; procedure = games_howell | ✓ Δ 7.7×10-10 (7 digits) ↗ | ||||
| One-way ANOVA | One-way ANOVA Helmert contrasts pooled | alpha = 0.05; contrast adjustment = none; contrast family = helmert; contrast variance = pooled; procedure = none | ✓ Δ 4.6×10-14 (13 digits) ↗ | ||||
| One-way ANOVA | One-way ANOVA Holm | alpha = 0.05; procedure = holm | ✓ Δ 4.6×10-14 (13 digits) ↗ | ||||
| One-way ANOVA | One-way ANOVA LSD alpha 0.10 | alpha = 0.1; procedure = lsd | ✓ Δ 4.6×10-14 (13 digits) ↗ | ||||
| One-way ANOVA | One-way ANOVA Scheffe | alpha = 0.05; procedure = scheffe | ✓ Δ 4.6×10-14 (13 digits) ↗ | ||||
| One-way ANOVA | One-way ANOVA Tukey-Kramer | alpha = 0.05; procedure = tukey | ✓ Δ 3.4×10-8 (7 digits) ↗ | ||||
| One-way ANOVA | One-way ANOVA custom contrasts Welch Bonferroni | alpha = 0.05; coefficients = 1, -0.5, -0.5, 1, 0, -1; contrast adjustment = bonferroni; contrast family = custom; contrast variance = welch; procedure = none | ✓ Δ 4.6×10-14 (12 digits) ↗ | ||||
| Paired comparisons | Additional configuration coverage | histogram bins = 5; inference = monte_carlo; max cells = 1000; max rows = 100; mode = paired; resamples = 100; seed = 42 | ✓ Δ 4.3×10-18 (15+ digits) ↗ | ||||
| Paired comparisons | Bartlett | default settings | ✓ Δ 1.5×10-18 (15+ digits) ↗ | ||||
| Paired comparisons | Below minimum: One response per group is below the independent permutation minimum. | inference = exact; mode = independent | ✓ ↗ | ||||
| Paired comparisons | Chi square association | default settings | ✓ exact ↗ | ||||
| Paired comparisons | Chi square gof | default settings | ✓ exact ↗ | ||||
| Paired comparisons | Classic | posthoc = no | ✓ Δ 3.2×10-15 (14 digits) ↗ | ||||
| Paired comparisons | Exact independent mean permutation | inference = exact; mode = independent | ✓ Δ 8.8×10-16 (15+ digits) ↗ | ||||
| Paired comparisons | F | default settings | ✓ Δ 6.2×10-15 (14 digits) ↗ | ||||
| Paired comparisons | Fisher | success value = yes | ✓ Δ 2.2×10-16 (15+ digits) ↗ | ||||
| Paired comparisons | Kruskal wallis | default settings | ✓ Δ 4.4×10-15 (13 digits) ↗ | ||||
| Paired comparisons | Large-offset numerical case | inference = exact; mode = independent | ✓ Δ 3.9×10-17 (15+ digits) ↗ | ||||
| Paired comparisons | Levene | default settings | ✓ Δ 1.1×10-16 (15+ digits) ↗ | ||||
| Paired comparisons | Mann whitney | default settings | ✓ Δ 3.1×10-18 (15+ digits) ↗ | ||||
| Paired comparisons | Missing and excluded population | inference = exact; mode = independent | ✓ Δ 8.9×10-16 (14 digits) ↗ | ||||
| Paired comparisons | Moods median | default settings | ✓ Δ 3.0×10-15 (14 digits) ↗ | ||||
| Paired comparisons | One proportion | success value = yes; target = 0.4 | ✓ Δ 2.8×10-16 (15+ digits) ↗ | ||||
| Paired comparisons | One sample t | alpha = 0 | ✓ ↗ | ||||
| Paired comparisons | One sample t | alpha = 0.1; target = 0 | ✓ Δ 3.9×10-18 (15+ digits) ↗ | ||||
| Paired comparisons | One sample t | alpha = 0.1; target = 5.96 | ✓ Δ 2.0×10-15 (13 digits) ↗ | ||||
| Paired comparisons | One sample t | alpha = 0.1; target = 5.97688 | ✓ Δ 3.0×10-16 (14 digits) ↗ | ||||
| Paired comparisons | One sample t | alternative = greater; target = 6.2 | ✓ Δ 1.6×10-15 (14 digits) ↗ | ||||
| Paired comparisons | One sample t | alternative = less; target = 6.2 | ✓ Δ 1.6×10-15 (14 digits) ↗ | ||||
| Paired comparisons | One sample t | alternative = two-sided; target = 6.2 | ✓ Δ 1.6×10-15 (14 digits) ⟨R⟩ ↗ | ||||
| Paired comparisons | One sample t | default settings | ✓ ↗ | ||||
| Paired comparisons | One sample t | target = 0 | ✓ Δ 4.8×10-16 (15+ digits) ↗ | ✓ ↗ | |||
| Paired comparisons | One sample t | target = 1000000006 | ✓ Δ 1.1×10-8 (7 digits) ↗ | ||||
| Paired comparisons | One sample t | target = 6 | ✓ Δ 2.6×10-15 (14 digits) ↗ | ||||
| Paired comparisons | One way ANOVA | posthoc = yes | ✓ Δ 7.1×10-15 (14 digits) ↗ | ||||
| Paired comparisons | Paired comparisons | alternative = greater; inference = exact; mode = independent | ✓ Δ 8.8×10-16 (15+ digits) ↗ | ||||
| Paired comparisons | Paired comparisons | alternative = less; inference = exact; mode = independent | ✓ Δ 8.8×10-16 (15+ digits) ↗ | ||||
| Paired comparisons | Paired comparisons | inference = exact; max cells = 1000; max rows = 100; mode = independent | ✓ Δ 1.1×10-16 (15+ digits) ↗ | ||||
| Paired comparisons | Paired comparisons | inference = exact; mode = independent | ✓ ↗ | ||||
| Paired comparisons | Paired comparisons | inference = exact; mode = paired | ✓ Δ 4.3×10-18 (15+ digits) ↗ | ||||
| Paired comparisons | Paired comparisons | inference = monte_carlo; mode = independent; resamples = 100; seed = 77 | ✓ Δ 8.8×10-16 (15+ digits) ↗ | ||||
| Paired comparisons | Paired comparisons | inference = unsupported; mode = independent | ✓ ↗ | ||||
| Paired comparisons | Paired comparisons | mode = independent | ✓ ↗ | ||||
| Paired comparisons | Paired t | default settings | ✓ Δ 1.5×10-14 (13 digits) ⟨R⟩ ↗ | ||||
| Paired comparisons | Pooled | default settings | ✓ Δ 8.9×10-16 (14 digits) ↗ | ||||
| Paired comparisons | Sign | default settings | ✓ Δ 6.4×10-21 (15+ digits) ↗ | ||||
| Paired comparisons | Two way ANOVA | posthoc = no | ✓ Δ 5.7×10-15 (12 digits) ↗ | ||||
| Paired comparisons | Unsupported | default settings | ✓ ↗ | ||||
| Paired comparisons | Welch | default settings | ✓ Δ 6.6×10-15 (15+ digits) ⟨R⟩ ↗ | ||||
| Paired comparisons | Welch | posthoc = no | ✓ Δ 2.6×10-15 (14 digits) ↗ | ||||
| Paired comparisons | Wilcoxon | default settings | ✓ exact ↗ | ||||
| Paired comparisons | Z | success value = yes | ✓ Δ 5.8×10-17 (15+ digits) ↗ | ||||
| Rank & median comparisons | Bartlett | default settings | ✓ Δ 1.5×10-18 (15+ digits) ↗ | ||||
| Rank & median comparisons | Chi square association | default settings | ✓ exact ↗ | ||||
| Rank & median comparisons | Chi square gof | default settings | ✓ exact ↗ | ||||
| Rank & median comparisons | Classic | posthoc = no | ✓ Δ 3.2×10-15 (14 digits) ↗ | ||||
| Rank & median comparisons | F | default settings | ✓ Δ 6.2×10-15 (14 digits) ↗ | ||||
| Rank & median comparisons | Fisher | success value = yes | ✓ Δ 2.2×10-16 (15+ digits) ↗ | ||||
| Rank & median comparisons | Kruskal wallis | default settings | ✓ Δ 4.4×10-15 (13 digits) ↗ | ||||
| Rank & median comparisons | Levene | default settings | ✓ Δ 1.1×10-16 (15+ digits) ↗ | ||||
| Rank & median comparisons | Mann whitney | default settings | ✓ Δ 3.1×10-18 (15+ digits) ↗ | ||||
| Rank & median comparisons | Moods median | default settings | ✓ Δ 3.0×10-15 (14 digits) ↗ | ||||
| Rank & median comparisons | One proportion | success value = yes; target = 0.4 | ✓ Δ 2.8×10-16 (15+ digits) ↗ | ||||
| Rank & median comparisons | One sample t | alpha = 0 | ✓ ↗ | ||||
| Rank & median comparisons | One sample t | alpha = 0.1; target = 0 | ✓ Δ 3.9×10-18 (15+ digits) ↗ | ||||
| Rank & median comparisons | One sample t | alpha = 0.1; target = 5.96 | ✓ Δ 2.0×10-15 (13 digits) ↗ | ||||
| Rank & median comparisons | One sample t | alpha = 0.1; target = 5.97688 | ✓ Δ 3.0×10-16 (14 digits) ↗ | ||||
| Rank & median comparisons | One sample t | alternative = greater; target = 6.2 | ✓ Δ 1.6×10-15 (14 digits) ↗ | ||||
| Rank & median comparisons | One sample t | alternative = less; target = 6.2 | ✓ Δ 1.6×10-15 (14 digits) ↗ | ||||
| Rank & median comparisons | One sample t | alternative = two-sided; target = 6.2 | ✓ Δ 1.6×10-15 (14 digits) ⟨R⟩ ↗ | ||||
| Rank & median comparisons | One sample t | default settings | ✓ ↗ | ||||
| Rank & median comparisons | One sample t | target = 0 | ✓ Δ 4.8×10-16 (15+ digits) ↗ | ✓ ↗ | |||
| Rank & median comparisons | One sample t | target = 1000000006 | ✓ Δ 1.1×10-8 (7 digits) ↗ | ||||
| Rank & median comparisons | One sample t | target = 6 | ✓ Δ 2.6×10-15 (14 digits) ↗ | ||||
| Rank & median comparisons | One way ANOVA | posthoc = yes | ✓ Δ 7.1×10-15 (14 digits) ↗ | ||||
| Rank & median comparisons | Paired t | default settings | ✓ Δ 1.5×10-14 (13 digits) ⟨R⟩ ↗ | ||||
| Rank & median comparisons | Pooled | default settings | ✓ Δ 8.9×10-16 (14 digits) ↗ | ||||
| Rank & median comparisons | Sign | default settings | ✓ Δ 6.4×10-21 (15+ digits) ↗ | ||||
| Rank & median comparisons | Two way ANOVA | posthoc = no | ✓ Δ 5.7×10-15 (12 digits) ↗ | ||||
| Rank & median comparisons | Unsupported | default settings | ✓ ↗ | ||||
| Rank & median comparisons | Welch | default settings | ✓ Δ 6.6×10-15 (15+ digits) ⟨R⟩ ↗ | ||||
| Rank & median comparisons | Welch | posthoc = no | ✓ Δ 2.6×10-15 (14 digits) ↗ | ||||
| Rank & median comparisons | Wilcoxon | default settings | ✓ exact ↗ | ||||
| Rank & median comparisons | Z | success value = yes | ✓ Δ 5.8×10-17 (15+ digits) ↗ | ||||
| Two independent means | Additional configuration coverage | histogram bins = 5; inference = monte_carlo; max cells = 1000; max rows = 100; mode = paired; resamples = 100; seed = 42 | ✓ Δ 4.3×10-18 (15+ digits) ↗ | ||||
| Two independent means | Bartlett | default settings | ✓ Δ 1.5×10-18 (15+ digits) ↗ | ||||
| Two independent means | Below minimum: One response per group is below the independent permutation minimum. | inference = exact; mode = independent | ✓ ↗ | ||||
| Two independent means | Chi square association | default settings | ✓ exact ↗ | ||||
| Two independent means | Chi square gof | default settings | ✓ exact ↗ | ||||
| Two independent means | Classic | posthoc = no | ✓ Δ 3.2×10-15 (14 digits) ↗ | ||||
| Two independent means | Exact independent mean permutation | inference = exact; mode = independent | ✓ Δ 8.8×10-16 (15+ digits) ↗ | ||||
| Two independent means | F | default settings | ✓ Δ 6.2×10-15 (14 digits) ↗ | ||||
| Two independent means | Fisher | success value = yes | ✓ Δ 2.2×10-16 (15+ digits) ↗ | ||||
| Two independent means | Kruskal wallis | default settings | ✓ Δ 4.4×10-15 (13 digits) ↗ | ||||
| Two independent means | Large-offset numerical case | inference = exact; mode = independent | ✓ Δ 3.9×10-17 (15+ digits) ↗ | ||||
| Two independent means | Levene | default settings | ✓ Δ 1.1×10-16 (15+ digits) ↗ | ||||
| Two independent means | Mann whitney | default settings | ✓ Δ 3.1×10-18 (15+ digits) ↗ | ||||
| Two independent means | Missing and excluded population | inference = exact; mode = independent | ✓ Δ 8.9×10-16 (14 digits) ↗ | ||||
| Two independent means | Moods median | default settings | ✓ Δ 3.0×10-15 (14 digits) ↗ | ||||
| Two independent means | One proportion | success value = yes; target = 0.4 | ✓ Δ 2.8×10-16 (15+ digits) ↗ | ||||
| Two independent means | One sample t | alpha = 0 | ✓ ↗ | ||||
| Two independent means | One sample t | alpha = 0.1; target = 0 | ✓ Δ 3.9×10-18 (15+ digits) ↗ | ||||
| Two independent means | One sample t | alpha = 0.1; target = 5.96 | ✓ Δ 2.0×10-15 (13 digits) ↗ | ||||
| Two independent means | One sample t | alpha = 0.1; target = 5.97688 | ✓ Δ 3.0×10-16 (14 digits) ↗ | ||||
| Two independent means | One sample t | alternative = greater; target = 6.2 | ✓ Δ 1.6×10-15 (14 digits) ↗ | ||||
| Two independent means | One sample t | alternative = less; target = 6.2 | ✓ Δ 1.6×10-15 (14 digits) ↗ | ||||
| Two independent means | One sample t | alternative = two-sided; target = 6.2 | ✓ Δ 1.6×10-15 (14 digits) ⟨R⟩ ↗ | ||||
| Two independent means | One sample t | default settings | ✓ ↗ | ||||
| Two independent means | One sample t | target = 0 | ✓ Δ 4.8×10-16 (15+ digits) ↗ | ✓ ↗ | |||
| Two independent means | One sample t | target = 1000000006 | ✓ Δ 1.1×10-8 (7 digits) ↗ | ||||
| Two independent means | One sample t | target = 6 | ✓ Δ 2.6×10-15 (14 digits) ↗ | ||||
| Two independent means | One way ANOVA | posthoc = yes | ✓ Δ 7.1×10-15 (14 digits) ↗ | ||||
| Two independent means | Paired t | default settings | ✓ Δ 1.5×10-14 (13 digits) ⟨R⟩ ↗ | ||||
| Two independent means | Pooled | default settings | ✓ Δ 8.9×10-16 (14 digits) ↗ | ||||
| Two independent means | Sign | default settings | ✓ Δ 6.4×10-21 (15+ digits) ↗ | ||||
| Two independent means | Two independent means | alternative = greater; inference = exact; mode = independent | ✓ Δ 8.8×10-16 (15+ digits) ↗ | ||||
| Two independent means | Two independent means | alternative = less; inference = exact; mode = independent | ✓ Δ 8.8×10-16 (15+ digits) ↗ | ||||
| Two independent means | Two independent means | inference = exact; max cells = 1000; max rows = 100; mode = independent | ✓ Δ 1.1×10-16 (15+ digits) ↗ | ||||
| Two independent means | Two independent means | inference = exact; mode = independent | ✓ ↗ | ||||
| Two independent means | Two independent means | inference = exact; mode = paired | ✓ Δ 4.3×10-18 (15+ digits) ↗ | ||||
| Two independent means | Two independent means | inference = monte_carlo; mode = independent; resamples = 100; seed = 77 | ✓ Δ 8.8×10-16 (15+ digits) ↗ | ||||
| Two independent means | Two independent means | inference = unsupported; mode = independent | ✓ ↗ | ||||
| Two independent means | Two independent means | mode = independent | ✓ ↗ | ||||
| Two independent means | Two way ANOVA | posthoc = no | ✓ Δ 5.7×10-15 (12 digits) ↗ | ||||
| Two independent means | Unsupported | default settings | ✓ ↗ | ||||
| Two independent means | Welch | default settings | ✓ Δ 6.6×10-15 (15+ digits) ⟨R⟩ ↗ | ||||
| Two independent means | Welch | posthoc = no | ✓ Δ 2.6×10-15 (14 digits) ↗ | ||||
| Two independent means | Wilcoxon | default settings | ✓ exact ↗ | ||||
| Two independent means | Z | success value = yes | ✓ Δ 5.8×10-17 (15+ digits) ↗ | ||||
| Variances & standard deviations | Bartlett | default settings | ✓ Δ 1.5×10-18 (15+ digits) ↗ | ||||
| Variances & standard deviations | Chi square association | default settings | ✓ exact ↗ | ||||
| Variances & standard deviations | Chi square gof | default settings | ✓ exact ↗ | ||||
| Variances & standard deviations | Classic | posthoc = no | ✓ Δ 3.2×10-15 (14 digits) ↗ | ||||
| Variances & standard deviations | F | default settings | ✓ Δ 6.2×10-15 (14 digits) ↗ | ||||
| Variances & standard deviations | Fisher | success value = yes | ✓ Δ 2.2×10-16 (15+ digits) ↗ | ||||
| Variances & standard deviations | Known sigma Z | alpha = 0.1; alternative = greater; confidence level = 0.9; known sigma = 2; max rows = 100; null mean = 6 | ✓ Δ 3.4×10-17 (15+ digits) ↗ | ||||
| Variances & standard deviations | Known sigma Z | alpha = 0.1; alternative = less; confidence level = 0.9; known sigma = 2; max rows = 100; null mean = 6 | ✓ Δ 1.3×10-18 (15+ digits) ↗ | ||||
| Variances & standard deviations | Known sigma Z | alpha = 0.1; known sigma = 1; max rows = 100; null mean = 0 | ✓ Δ 3.5×10-17 (15+ digits) ↗ | ||||
| Variances & standard deviations | Known sigma Z | alpha = 0; known sigma = 2; null mean = 6 | ✓ ↗ | ||||
| Variances & standard deviations | Known sigma Z | input kind = raw; known sigma = 2; null mean = 6 | ✓ Δ 6.7×10-17 (15+ digits) ↗ | ||||
| Variances & standard deviations | Known sigma Z | input kind = summary; known sigma = 2; null mean = 6; sample size = 16; summary mean = 6.8125 | ✓ Δ 6.7×10-17 (15+ digits) ↗ | ||||
| Variances & standard deviations | Known sigma Z | known sigma = 0; null mean = 6 | ✓ ↗ | ||||
| Variances & standard deviations | Known sigma Z | known sigma = 2; null mean = 1000000006 | ✓ Δ 6.7×10-17 (15+ digits) ↗ | ||||
| Variances & standard deviations | Known sigma Z | known sigma = 2; null mean = 6 | ✓ Δ 4.0×10-18 (15+ digits) ↗ | ||||
| Variances & standard deviations | Kruskal wallis | default settings | ✓ Δ 4.4×10-15 (13 digits) ↗ | ||||
| Variances & standard deviations | Levene | default settings | ✓ Δ 1.1×10-16 (15+ digits) ↗ | ||||
| Variances & standard deviations | Mann whitney | default settings | ✓ Δ 3.1×10-18 (15+ digits) ↗ | ||||
| Variances & standard deviations | Moods median | default settings | ✓ Δ 3.0×10-15 (14 digits) ↗ | ||||
| Variances & standard deviations | One poisson rate | alternative = greater; null rate = 0.15 | ✓ Δ 2.3×10-16 (15+ digits) ↗ | ||||
| Variances & standard deviations | One poisson rate | alternative = less; null rate = 0.15 | ✓ Δ 1.1×10-16 (15+ digits) ↗ | ||||
| Variances & standard deviations | One poisson rate | exposure unit = hours; input kind = raw; null rate = 0.15 | ✓ Δ 4.4×10-18 (15+ digits) ↗ | ||||
| Variances & standard deviations | One poisson rate | input kind = summary; null rate = 0.15; summary count = 12; summary exposure = 80 | ✓ Δ 4.4×10-18 (15+ digits) ↗ | ||||
| Variances & standard deviations | One poisson rate | null rate = 0.1 | ✓ Δ 7.1×10-18 (15+ digits) ↗ | ||||
| Variances & standard deviations | One proportion | success value = yes; target = 0.4 | ✓ Δ 2.8×10-16 (15+ digits) ↗ | ||||
| Variances & standard deviations | One sample t | alpha = 0 | ✓ ↗ | ||||
| Variances & standard deviations | One sample t | alpha = 0.1; target = 0 | ✓ Δ 3.9×10-18 (15+ digits) ↗ | ||||
| Variances & standard deviations | One sample t | alpha = 0.1; target = 5.96 | ✓ Δ 2.0×10-15 (13 digits) ↗ | ||||
| Variances & standard deviations | One sample t | alpha = 0.1; target = 5.97688 | ✓ Δ 3.0×10-16 (14 digits) ↗ | ||||
| Variances & standard deviations | One sample t | alternative = greater; target = 6.2 | ✓ Δ 1.6×10-15 (14 digits) ↗ | ||||
| Variances & standard deviations | One sample t | alternative = less; target = 6.2 | ✓ Δ 1.6×10-15 (14 digits) ↗ | ||||
| Variances & standard deviations | One sample t | alternative = two-sided; target = 6.2 | ✓ Δ 1.6×10-15 (14 digits) ⟨R⟩ ↗ | ||||
| Variances & standard deviations | One sample t | default settings | ✓ ↗ | ||||
| Variances & standard deviations | One sample t | target = 0 | ✓ Δ 4.8×10-16 (15+ digits) ↗ | ✓ ↗ | |||
| Variances & standard deviations | One sample t | target = 1000000006 | ✓ Δ 1.1×10-8 (7 digits) ↗ | ||||
| Variances & standard deviations | One sample t | target = 6 | ✓ Δ 2.6×10-15 (14 digits) ↗ | ||||
| Variances & standard deviations | One variance chi square | alternative = greater; null variance = 4 | ✓ Δ 3.3×10-15 (15+ digits) ↗ | ||||
| Variances & standard deviations | One variance chi square | alternative = less; null variance = 4 | ✓ Δ 3.3×10-15 (15+ digits) ↗ | ||||
| Variances & standard deviations | One variance chi square | input kind = raw; null variance = 4; variance display = sd | ✓ Δ 3.3×10-15 (15+ digits) ↗ | ||||
| Variances & standard deviations | One variance chi square | input kind = summary; null variance = 4; sample size = 16; summary variance = 3.70917 | ✓ Δ 1.2×10-14 (14 digits) ↗ | ||||
| Variances & standard deviations | One variance chi square | null variance = 1 | ✓ ↗ | ||||
| Variances & standard deviations | One way ANOVA | posthoc = yes | ✓ Δ 7.1×10-15 (14 digits) ↗ | ||||
| Variances & standard deviations | Paired t | default settings | ✓ Δ 1.5×10-14 (13 digits) ⟨R⟩ ↗ | ||||
| Variances & standard deviations | Pooled | default settings | ✓ Δ 8.9×10-16 (14 digits) ↗ | ||||
| Variances & standard deviations | Sign | default settings | ✓ Δ 6.4×10-21 (15+ digits) ↗ | ||||
| Variances & standard deviations | Two poisson rate | alternative = greater; input kind = summary; null ratio = 1; summary count = 4; summary count 2 = 8; summary exposure = 38; summary exposure 2 = 42 | ✓ Δ 1.1×10-16 (15+ digits) ↗ | ||||
| Variances & standard deviations | Two poisson rate | alternative = greater; null ratio = 1 | ✓ Δ 1.1×10-16 (15+ digits) ↗ | ||||
| Variances & standard deviations | Two poisson rate | alternative = less; null ratio = 1 | ✓ Δ 3.6×10-18 (15+ digits) ↗ | ||||
| Variances & standard deviations | Two poisson rate | exposure unit = days; input kind = raw; null ratio = 1 | ✓ Δ 5.2×10-17 (15+ digits) ↗ | ||||
| Variances & standard deviations | Two way ANOVA | posthoc = no | ✓ Δ 5.7×10-15 (12 digits) ↗ | ||||
| Variances & standard deviations | Unsupported | default settings | ✓ ↗ | ||||
| Variances & standard deviations | Welch | default settings | ✓ Δ 6.6×10-15 (15+ digits) ⟨R⟩ ↗ | ||||
| Variances & standard deviations | Welch | posthoc = no | ✓ Δ 2.6×10-15 (14 digits) ↗ | ||||
| Variances & standard deviations | Wilcoxon | default settings | ✓ exact ↗ | ||||
| Variances & standard deviations | Z | success value = yes | ✓ Δ 5.8×10-17 (15+ digits) ↗ |
Statistics › Missing data
| Window | Analysis | Settings compared | NIST | R | Analytical | Published example | Independent reviewer |
|---|---|---|---|---|---|---|---|
| Missing-data patterns & diagnostics | EM to a custom tolerance of 1e-10 | categorical = g; em max iterations = 5000; em preset = custom; em tolerance = 1e-10; quantitative = x, y, z | ✓ Δ 2.7×10-10 (9 digits) ↗ | ||||
| Missing-data patterns & diagnostics | Excluded rows leave the analysis population | categorical = g; quantitative = x, y, z | ✓ Δ 1.7×10-5 (5 digits) ↗ | ||||
| Missing-data patterns & diagnostics | Missing value analysis with the default settings | categorical = g; quantitative = x, y, z | ✓ Δ 2.7×10-6 (5 digits) ↗ | ||||
| Missing-data patterns & diagnostics | Raw p-values, 1% indicator threshold, SPSS-style EM | adjustment = none; categorical = g; em preset = spss; min percent = 1; quantitative = x, y, z | ✓ Δ 2.6×10-4 (4 digits) ↗ | ||||
| Multiple imputation & pooled regression | No missing values bypass imputation and give the ordinary OLS fit | analysis = model ols, outcome y, predictors x; confidence level = 0.95; imputations = 2; seed = 20260923; sweeps = 40 | ✓ Δ 1.6×10-15 (15+ digits) ↗ | ||||
| Multiple imputation & pooled regression | Predictive mean matching copies an observed donor value | imputation = 2 | ✓ exact ↗ | ||||
| Multiple imputation & pooled regression | Replaying the completed-dataset operation recreates the recorded table | imputation = 1 | ✓ exact ↗ |
Statistics › Multivariate & clustering › Clustering
| Window | Analysis | Settings compared | NIST | R | Analytical | Published example | Independent reviewer |
|---|---|---|---|---|---|---|---|
| Hierarchical clustering | Configuration axis | cut k = 3; linkage = ward; mode = rows; standardize = no | ✓ Δ 4.0×10-19 (15+ digits) ↗ | ||||
| Hierarchical clustering | Hierarchical clustering | cut k = 2; linkage = ward | ✓ Δ 2.2×10-17 (15+ digits) ↗ | ||||
| Hierarchical clustering | Hierarchical clustering | cut k = 3; linkage = ward | ✓ Δ 1.5×10-19 (15+ digits) ↗ | ||||
| Hierarchical clustering | Hierarchical clustering | default settings | ✓ ↗ | ||||
| Hierarchical clustering | Hierarchical clustering | linkage = ward; mode = variables | ✓ ↗ | ||||
| Hierarchical clustering | Hierarchical clustering | name = cluster | ✓ ↗ | ||||
| Hierarchical clustering | Hierarchical clustering | name = cluster; unknown option = 1 | ✓ ↗ | ||||
| Hierarchical clustering | Hierarchical clustering | name = hcluster | ✓ exact ↗ | ||||
| Hierarchical clustering | Missing and excluded multivariate population | cut k = 3 | ✓ exact ↗ | ||||
| Hierarchical clustering | Multivariate | cut k = 3; linkage = ward | ✓ exact ↗ | ||||
| Hierarchical clustering | Multivariate option | cut k = 2; linkage = average; mode = variables; standardize = yes | ✓ Δ 5.5×10-17 (14 digits) ↗ | ||||
| Hierarchical clustering | Multivariate option | cut k = 3; linkage = average | ✓ Δ 9.7×10-17 (14 digits) ↗ | ||||
| Hierarchical clustering | Multivariate option | cut k = 3; linkage = complete | ✓ Δ 9.7×10-17 (14 digits) ↗ | ||||
| Hierarchical clustering | Ordered multivariate | cut k = 3; linkage = ward | ✓ exact ↗ | ||||
| Hierarchical clustering | Retained correction | name = hcluster | ✓ exact ↗ | ||||
| Hierarchical clustering | Retained scoring | name = hcluster | ✓ exact ↗ | ||||
| Hierarchical clustering | Variable-mode average linkage | cut k = 2; linkage = average; mode = variables; standardize = yes | ✓ Δ 5.5×10-17 (14 digits) ↗ | ||||
| K-means clustering | K-means clustering | k = 1 | ✓ ↗ | ||||
| K-means clustering | K-means clustering | k = 2 | ✓ ↗ | ||||
| K-means clustering | K-means clustering | k = 2; restarts = 50; seed = 11 | ✓ Δ 4.9×10-16 (15+ digits) ↗ | ||||
| K-means clustering | K-means clustering | k = 3; restarts = 50; seed = 11 | ✓ Δ 1.1×10-17 (15+ digits) ↗ | ||||
| K-means clustering | K-means clustering | name = cluster | ✓ ↗ | ||||
| K-means clustering | K-means clustering | name = cluster; unknown option = 1 | ✓ ↗ | ||||
| K-means clustering | K-means clustering | name = kcluster | ✓ exact ↗ | ||||
| K-means clustering | Missing and excluded multivariate population | k = 3; restarts = 50; seed = 37 | ✓ Δ 2.7×10-17 (15+ digits) ↗ | ||||
| K-means clustering | Multivariate | k = 3; restarts = 50; seed = 11 | ✓ Δ 1.9×10-17 (15+ digits) ↗ | ||||
| K-means clustering | Multivariate option | k = 3; restarts = 50; seed = 29; standardize = no | ✓ Δ 3.3×10-16 (15+ digits) ↗ | ||||
| K-means clustering | Ordered multivariate | k = 3; restarts = 50; seed = 11 | ✓ Δ 1.9×10-17 (15+ digits) ↗ | ||||
| K-means clustering | Retained correction | name = kcluster | ✓ exact ↗ | ||||
| K-means clustering | Retained scoring | name = kcluster | ✓ exact ↗ | ||||
| Model-based clustering | Gaussian | covariance = diagonal; k max = 1; k min = 1; kind = gaussian | ✓ Δ 3.1×10-11 (12 digits) ↗ | ||||
| Model-based clustering | Gaussian | covariance = diagonal; k max = 3; k min = 1; kind = gaussian | ✓ Δ 1.1×10-8 (10 digits) ↗ | ||||
| Model-based clustering | Gaussian | covariance = full; k max = 2; k min = 2; kind = gaussian | ✓ Δ 2.7×10-8 (9 digits) ↗ | ||||
| Model-based clustering | Latent class | k max = 1; k min = 1; kind = latent_class | ✓ Δ 5.0×10-15 (15+ digits) ↗ |
Statistics › Multivariate & clustering › Dimension reduction
| Window | Analysis | Settings compared | NIST | R | Analytical | Published example | Independent reviewer |
|---|---|---|---|---|---|---|---|
| Canonical correlation | Canonical correlation of one variable against one | first = x1; second = y1 | ✓ Δ 2.3×10-14 (13 digits) ↗ | ||||
| Canonical correlation | Canonical correlation of three and two variables | first = x1, x2, x3; second = y1, y2 | ✓ Δ 1.4×10-14 (14 digits) ↗ | ||||
| Canonical correlation | Canonical correlation of two and two variables with an excluded row | first = x1, x3; second = y1, y2 | ✓ Δ 2.4×10-14 (13 digits) ↗ | ||||
| Categorical principal components | Categorical PCA of numeric variables equals correlation PCA | dimensions = 2; numeric = x1, x2, x3 | ✓ Δ 4.3×10-14 (13 digits) ↗ | ||||
| Categorical principal components | Categorical PCA with a binary nominal variable, one dimension | dimensions = 1; nominal = site; numeric = x1, x2, x3 | ✓ Δ 2.9×10-14 (15+ digits) ↗ | ||||
| Categorical principal components | Categorical PCA with a binary ordinal variable | dimensions = 2; numeric = x1, x2; orders = rating: low < high; ordinal = rating | ✓ Δ 1.5×10-14 (14 digits) ↗ | ||||
| Correspondence analysis | CA principal-coordinate sign convention | dimensions = 1; mode = count_table | ✓ Δ 1.1×10-16 (15+ digits) ↗ | ||||
| Correspondence analysis | Correspondence analysis | dimensions = 0; mode = categorical | ✓ ↗ | ||||
| Correspondence analysis | Correspondence analysis | mode = categorical | ✓ ↗ | ||||
| Correspondence analysis | Correspondence analysis | mode = count_table | ✓ Δ 3.4×10-19 (15+ digits) ↗ | ||||
| Correspondence analysis | Missing and excluded multivariate population | mode = categorical | ✓ Δ 4.9×10-16 (15+ digits) ↗ | ||||
| Correspondence analysis | Multivariate | mode = categorical | ✓ Δ 2.2×10-16 (15+ digits) ↗ | ||||
| Correspondence analysis | Multivariate option | mode = count_table | ✓ Δ 2.2×10-16 (15+ digits) ↗ | ||||
| Exploratory factor analysis | Exploratory factor analysis | default settings | ✓ ↗ | ||||
| Exploratory factor analysis | Exploratory factor analysis | names = score | ✓ ↗ | ||||
| Exploratory factor analysis | Exploratory factor analysis | names = score; unknown option = 1 | ✓ ↗ | ||||
| Exploratory factor analysis | Exploratory factor analysis | rotation = none | ✓ Δ 1.1×10-9 (7 digits) ↗ | ||||
| Exploratory factor analysis | Factor preprocessing after missing and exclusion | default settings | ✓ Δ 5.3×10-15 (14 digits) ↗ | ||||
| Exploratory factor analysis | One-factor maximum-likelihood fit | rotation = none | ✓ Δ 1.0×10-8 (7 digits) ↗ | ||||
| Exploratory factor analysis | Retained correction | names = factor1 | ✓ Δ 1.1×10-16 (15+ digits) ↗ | ||||
| Exploratory factor analysis | Retained scoring | names = factor1 | ✓ Δ 4.5×10-11 (10 digits) ↗ | ||||
| Exploratory factor analysis | Seeded ML factor fit none | rotation = none | ✓ Δ 3.2×10-9 (6 digits) ↗ | ||||
| Exploratory factor analysis | Seeded ML factor fit varimax | rotation = varimax | ✓ Δ 4.9×10-10 (7 digits) ↗ | ||||
| Exploratory factor analysis | Seeded ML factor-loading sign convention | rotation = none | ✓ exact ↗ | ||||
| Exploratory factor analysis | Stable ML factor fit none | rotation = none | ✓ Δ 3.2×10-9 (6 digits) ↗ | ||||
| Exploratory factor analysis | Stable ML factor fit varimax | rotation = varimax | ✓ Δ 4.9×10-10 (7 digits) ↗ | ||||
| Multidimensional scaling | Classical | dimensions = 1; source = matrix | ✓ Δ 1.3×10-15 (15+ digits) ↗ | ||||
| Multidimensional scaling | Classical | dimensions = 2; distance = cityblock; labels = unit; objects = rows; source = variables; standardize = no | ✓ Δ 1.6×10-12 (13 digits) ↗ | ||||
| Multidimensional scaling | Classical | dimensions = 2; distance = correlation; labels = unit; objects = variables; source = variables | ✓ Δ 2.2×10-15 (14 digits) ↗ | ||||
| Multidimensional scaling | Classical | dimensions = 2; distance = euclidean; labels = unit; objects = rows; source = variables; standardize = yes | ✓ Δ 3.9×10-14 (14 digits) ↗ | ||||
| Multidimensional scaling | Classical | dimensions = 2; labels = site; source = matrix | ✓ Δ 2.8×10-14 (14 digits) ↗ | ||||
| Multidimensional scaling | Ordinal | dimensions = 2; source = matrix; ties = primary | ✓ Δ 1.3×10-14 (14 digits) ↗ | ||||
| Multidimensional scaling | Ordinal | dimensions = 2; source = matrix; ties = secondary | ✓ Δ 1.3×10-14 (14 digits) ↗ | ||||
| Multiple correspondence analysis | Indicator MCA of three variables, complete rows | dimensions = 2; missing = complete | ✓ Δ 2.3×10-13 (13 digits) ↗ | ||||
| Multiple correspondence analysis | Indicator MCA reporting one dimension | dimensions = 1; missing = complete | ✓ Δ 2.3×10-13 (13 digits) ↗ | ||||
| Multiple correspondence analysis | Indicator MCA with a supplementary variable | dimensions = 1; missing = complete; supplementary = sector | ✓ Δ 2.3×10-13 (13 digits) ↗ | ||||
| Multiple correspondence analysis | Indicator MCA with missing values as a category | dimensions = 2; missing = category | ✓ Δ 4.2×10-14 (13 digits) ↗ | ||||
| Principal component analysis | Missing and excluded multivariate population | n components = 2 | ✓ Δ 2.7×10-16 (15+ digits) ↗ | ||||
| Principal component analysis | Multivariate | n components = 2; scaling = correlation | ✓ Δ 6.7×10-16 (15+ digits) ↗ | ||||
| Principal component analysis | Multivariate option | n components = 2; scaling = covariance | ✓ Δ 1.4×10-16 (15+ digits) ↗ | ||||
| Principal component analysis | Principal component analysis | default settings | ✓ ↗ | ||||
| Principal component analysis | Principal component analysis | n components = 0 | ✓ ↗ | ||||
| Principal component analysis | Principal component analysis | n components = 1; scaling = correlation | ✓ Δ 4.4×10-17 (15+ digits) ↗ | ||||
| Principal component analysis | Principal component analysis | n components = 2; scaling = correlation | ✓ Δ 2.6×10-16 (15+ digits) ↗ | ||||
| Principal component analysis | Principal component analysis | names = pc1 | ✓ Δ 5.6×10-16 (15+ digits) ↗ | ||||
| Principal component analysis | Principal component analysis | names = score | ✓ ↗ | ||||
| Principal component analysis | Principal component analysis | names = score; unknown option = 1 | ✓ ↗ | ||||
| Principal component analysis | Retained correction | names = pc1 | ✓ Δ 1.8×10-15 (14 digits) ↗ | ||||
| Principal component analysis | Retained scoring | names = pc1 | ✓ Δ 6.9×10-11 (10 digits) ↗ |
Statistics › Proportions & categorical data
| Window | Analysis | Settings compared | NIST | R | Analytical | Published example | Independent reviewer |
|---|---|---|---|---|---|---|---|
| Categorical goodness-of-fit | Bartlett | default settings | ✓ Δ 1.5×10-18 (15+ digits) ↗ | ||||
| Categorical goodness-of-fit | Chi square association | default settings | ✓ exact ↗ | ||||
| Categorical goodness-of-fit | Chi square gof | default settings | ✓ exact ↗ | ||||
| Categorical goodness-of-fit | Classic | posthoc = no | ✓ Δ 3.2×10-15 (14 digits) ↗ | ||||
| Categorical goodness-of-fit | F | default settings | ✓ Δ 6.2×10-15 (14 digits) ↗ | ||||
| Categorical goodness-of-fit | Fisher | success value = yes | ✓ Δ 2.2×10-16 (15+ digits) ↗ | ||||
| Categorical goodness-of-fit | Kruskal wallis | default settings | ✓ Δ 4.4×10-15 (13 digits) ↗ | ||||
| Categorical goodness-of-fit | Levene | default settings | ✓ Δ 1.1×10-16 (15+ digits) ↗ | ||||
| Categorical goodness-of-fit | Mann whitney | default settings | ✓ Δ 3.1×10-18 (15+ digits) ↗ | ||||
| Categorical goodness-of-fit | Moods median | default settings | ✓ Δ 3.0×10-15 (14 digits) ↗ | ||||
| Categorical goodness-of-fit | One proportion | success value = yes; target = 0.4 | ✓ Δ 2.8×10-16 (15+ digits) ↗ | ||||
| Categorical goodness-of-fit | One sample t | alpha = 0 | ✓ ↗ | ||||
| Categorical goodness-of-fit | One sample t | alpha = 0.1; target = 0 | ✓ Δ 3.9×10-18 (15+ digits) ↗ | ||||
| Categorical goodness-of-fit | One sample t | alpha = 0.1; target = 5.96 | ✓ Δ 2.0×10-15 (13 digits) ↗ | ||||
| Categorical goodness-of-fit | One sample t | alpha = 0.1; target = 5.97688 | ✓ Δ 3.0×10-16 (14 digits) ↗ | ||||
| Categorical goodness-of-fit | One sample t | alternative = greater; target = 6.2 | ✓ Δ 1.6×10-15 (14 digits) ↗ | ||||
| Categorical goodness-of-fit | One sample t | alternative = less; target = 6.2 | ✓ Δ 1.6×10-15 (14 digits) ↗ | ||||
| Categorical goodness-of-fit | One sample t | alternative = two-sided; target = 6.2 | ✓ Δ 1.6×10-15 (14 digits) ⟨R⟩ ↗ | ||||
| Categorical goodness-of-fit | One sample t | default settings | ✓ ↗ | ||||
| Categorical goodness-of-fit | One sample t | target = 0 | ✓ Δ 4.8×10-16 (15+ digits) ↗ | ✓ ↗ | |||
| Categorical goodness-of-fit | One sample t | target = 1000000006 | ✓ Δ 1.1×10-8 (7 digits) ↗ | ||||
| Categorical goodness-of-fit | One sample t | target = 6 | ✓ Δ 2.6×10-15 (14 digits) ↗ | ||||
| Categorical goodness-of-fit | One way ANOVA | posthoc = yes | ✓ Δ 7.1×10-15 (14 digits) ↗ | ||||
| Categorical goodness-of-fit | Paired t | default settings | ✓ Δ 1.5×10-14 (13 digits) ⟨R⟩ ↗ | ||||
| Categorical goodness-of-fit | Pooled | default settings | ✓ Δ 8.9×10-16 (14 digits) ↗ | ||||
| Categorical goodness-of-fit | Sign | default settings | ✓ Δ 6.4×10-21 (15+ digits) ↗ | ||||
| Categorical goodness-of-fit | Two way ANOVA | posthoc = no | ✓ Δ 5.7×10-15 (12 digits) ↗ | ||||
| Categorical goodness-of-fit | Unsupported | default settings | ✓ ↗ | ||||
| Categorical goodness-of-fit | Welch | default settings | ✓ Δ 6.6×10-15 (15+ digits) ⟨R⟩ ↗ | ||||
| Categorical goodness-of-fit | Welch | posthoc = no | ✓ Δ 2.6×10-15 (14 digits) ↗ | ||||
| Categorical goodness-of-fit | Wilcoxon | default settings | ✓ exact ↗ | ||||
| Categorical goodness-of-fit | Z | success value = yes | ✓ Δ 5.8×10-17 (15+ digits) ↗ | ||||
| Contingency tables & association | 2 x 2 crosstab at 90%: signed phi, odds ratio and relative risk intervals | confidence = 0.9; haldane correction = no; row = treated | ✓ Δ 8.4×10-16 (15+ digits) ↗ | ||||
| Contingency tables & association | 2 x 2 crosstab with an empty cell and no correction | confidence = 0.95; haldane correction = no; row = treated | ✓ Δ 4.4×10-18 (15+ digits) ↗ | ||||
| Contingency tables & association | 2 x 2 crosstab with an empty cell and the 0.5 correction | confidence = 0.95; haldane correction = yes; row = treated | ✓ Δ 9.0×10-16 (15+ digits) ↗ | ||||
| Contingency tables & association | 3 x 3 crosstab: chi-square family, nominal, ordinal, linear-by-linear and eta | confidence = 0.95; haldane correction = no; row = exposure; row order = Low, Medium, High | ✓ Δ 5.5×10-15 (14 digits) ↗ | ||||
| Contingency tables & association | Categorical | include margins = no; kind = categorical | ✓ exact ↗ | ||||
| Contingency tables & association | Categorical | include margins = yes; kind = categorical; overall percentages = yes; row percentages = yes | ✓ exact ↗ | ||||
| Contingency tables & association | Numeric | kind = numeric | ✓ Δ 1.1×10-9 (8 digits) ↗ | ✓ Δ 1.2×10-7 (15+ digits) ↗ | |||
| Loglinear models | STAT REG LOGLINEAR GENERAL 001 | coding = last; conditional test = off; confidence level = 0.95; count = n; sampling = poisson; terms = A*B, C | ✓ Δ 6.3×10-10 (8 digits) ↗ | ||||
| Loglinear models | STAT REG LOGLINEAR GENERAL 002 | coding = first; conditional test = off; confidence level = 0.9; count = n; sampling = multinomial; terms = A*B, C | ✓ Δ 1.3×10-9 (8 digits) ↗ | ||||
| Loglinear models | STAT REG LOGLINEAR GENERAL 003 | coding = last; conditional test = off; confidence level = 0.95; count = n; fixed margins = A; sampling = product_multinomial; terms = B*C | ✓ Δ 1.4×10-8 (7 digits) ↗ | ||||
| Loglinear models | STAT REG LOGLINEAR GENERAL 004 | cell structure = weight; coding = last; conditional test = off; confidence level = 0.95; count = n; intervals = wald_and_profile; pseudocount = yes; reference levels = B=b2; sampling = poisson; terms = A*B, C | ✓ Δ 3.4×10-13 (12 digits) ↗ | ||||
| Loglinear models | STAT REG LOGLINEAR GENERAL 005 | coding = last; conditional test = off; confidence level = 0.95; count = n; sampling = poisson; structural zeros = A=a1; B=b3; C=c2; terms = A*B, C | ✓ Δ 9.7×10-12 (10 digits) ↗ | ||||
| Loglinear models | STAT REG LOGLINEAR LOGIT 001 | coding = last; conditional test = off; confidence level = 0.95; count = n; dependent = C; sampling = poisson; terms = A*C, B*C | ✓ Δ 4.9×10-11 (9 digits) ↗ | ||||
| Loglinear models | STAT REG LOGLINEAR LOGIT 002 | coding = first; conditional test = off; confidence level = 0.95; count = n; dependent = C; sampling = multinomial; terms = A*C | ✓ Δ 9.2×10-13 (11 digits) ↗ | ||||
| Loglinear models | STAT REG LOGLINEAR SELECTION 001 | alpha = 0.05; coding = last; conditional test = off; confidence level = 0.95; count = n; highest order only = no; sampling = poisson | ✓ Δ 8.8×10-15 (12 digits) ↗ | ||||
| Loglinear models | STAT REG LOGLINEAR SELECTION 002 | alpha = 0.3; coding = last; conditional test = off; confidence level = 0.95; count = n; highest order only = no; sampling = poisson | ✓ Δ 8.8×10-15 (12 digits) ↗ | ||||
| Loglinear models | STAT REG LOGLINEAR SELECTION 003 | alpha = 0.05; coding = last; conditional test = off; confidence level = 0.95; count = n; highest order only = yes; sampling = poisson | ✓ Δ 8.8×10-15 (12 digits) ↗ | ||||
| Loglinear models | STAT REG LOGLINEAR SELECTION 004 | alpha = 0.05; coding = last; conditional test = off; confidence level = 0.95; count = n; fixed margins = A, B; highest order only = no; sampling = product_multinomial | ✓ Δ 8.8×10-15 (12 digits) ↗ | ||||
| Multiple-response tables | Multiple-category frequencies: repeated codes count as responses once per case | set name = choices | ✓ Δ 3.0×10-16 (15+ digits) ↗ | ||||
| Multiple-response tables | Multiple-dichotomy frequencies: case base, responses and percents | set name = features | ✓ Δ 3.5×10-16 (15+ digits) ↗ | ||||
| Multiple-response tables | Multiple-response crosstab against a column on the cases base | base = cases; set name = features | ✓ Δ 4.0×10-16 (15+ digits) ↗ | ||||
| Multiple-response tables | Multiple-response crosstab of two sets on the responses base | base = responses; by set = name choices, kind category, columns c1, c2, counted value None, label Suppliers named; by set name = choices; set name = features | ✓ Δ 3.7×10-16 (15+ digits) ↗ | ||||
| One proportion | Bartlett | default settings | ✓ Δ 1.5×10-18 (15+ digits) ↗ | ||||
| One proportion | Chi square association | default settings | ✓ exact ↗ | ||||
| One proportion | Chi square gof | default settings | ✓ exact ↗ | ||||
| One proportion | Classic | posthoc = no | ✓ Δ 3.2×10-15 (14 digits) ↗ | ||||
| One proportion | F | default settings | ✓ Δ 6.2×10-15 (14 digits) ↗ | ||||
| One proportion | Fisher | success value = yes | ✓ Δ 2.2×10-16 (15+ digits) ↗ | ||||
| One proportion | Kruskal wallis | default settings | ✓ Δ 4.4×10-15 (13 digits) ↗ | ||||
| One proportion | Levene | default settings | ✓ Δ 1.1×10-16 (15+ digits) ↗ | ||||
| One proportion | Mann whitney | default settings | ✓ Δ 3.1×10-18 (15+ digits) ↗ | ||||
| One proportion | Moods median | default settings | ✓ Δ 3.0×10-15 (14 digits) ↗ | ||||
| One proportion | One proportion | success value = yes; target = 0.4 | ✓ Δ 2.8×10-16 (15+ digits) ↗ | ||||
| One proportion | One sample t | alpha = 0 | ✓ ↗ | ||||
| One proportion | One sample t | alpha = 0.1; target = 0 | ✓ Δ 3.9×10-18 (15+ digits) ↗ | ||||
| One proportion | One sample t | alpha = 0.1; target = 5.96 | ✓ Δ 2.0×10-15 (13 digits) ↗ | ||||
| One proportion | One sample t | alpha = 0.1; target = 5.97688 | ✓ Δ 3.0×10-16 (14 digits) ↗ | ||||
| One proportion | One sample t | alternative = greater; target = 6.2 | ✓ Δ 1.6×10-15 (14 digits) ↗ | ||||
| One proportion | One sample t | alternative = less; target = 6.2 | ✓ Δ 1.6×10-15 (14 digits) ↗ | ||||
| One proportion | One sample t | alternative = two-sided; target = 6.2 | ✓ Δ 1.6×10-15 (14 digits) ⟨R⟩ ↗ | ||||
| One proportion | One sample t | default settings | ✓ ↗ | ||||
| One proportion | One sample t | target = 0 | ✓ Δ 4.8×10-16 (15+ digits) ↗ | ✓ ↗ | |||
| One proportion | One sample t | target = 1000000006 | ✓ Δ 1.1×10-8 (7 digits) ↗ | ||||
| One proportion | One sample t | target = 6 | ✓ Δ 2.6×10-15 (14 digits) ↗ | ||||
| One proportion | One way ANOVA | posthoc = yes | ✓ Δ 7.1×10-15 (14 digits) ↗ | ||||
| One proportion | Paired t | default settings | ✓ Δ 1.5×10-14 (13 digits) ⟨R⟩ ↗ | ||||
| One proportion | Pooled | default settings | ✓ Δ 8.9×10-16 (14 digits) ↗ | ||||
| One proportion | Sign | default settings | ✓ Δ 6.4×10-21 (15+ digits) ↗ | ||||
| One proportion | Two way ANOVA | posthoc = no | ✓ Δ 5.7×10-15 (12 digits) ↗ | ||||
| One proportion | Unsupported | default settings | ✓ ↗ | ||||
| One proportion | Welch | default settings | ✓ Δ 6.6×10-15 (15+ digits) ⟨R⟩ ↗ | ||||
| One proportion | Welch | posthoc = no | ✓ Δ 2.6×10-15 (14 digits) ↗ | ||||
| One proportion | Wilcoxon | default settings | ✓ exact ↗ | ||||
| One proportion | Z | success value = yes | ✓ Δ 5.8×10-17 (15+ digits) ↗ | ||||
| Poisson rates | Known sigma Z | alpha = 0.1; alternative = greater; confidence level = 0.9; known sigma = 2; max rows = 100; null mean = 6 | ✓ Δ 3.4×10-17 (15+ digits) ↗ | ||||
| Poisson rates | Known sigma Z | alpha = 0.1; alternative = less; confidence level = 0.9; known sigma = 2; max rows = 100; null mean = 6 | ✓ Δ 1.3×10-18 (15+ digits) ↗ | ||||
| Poisson rates | Known sigma Z | alpha = 0.1; known sigma = 1; max rows = 100; null mean = 0 | ✓ Δ 3.5×10-17 (15+ digits) ↗ | ||||
| Poisson rates | Known sigma Z | alpha = 0; known sigma = 2; null mean = 6 | ✓ ↗ | ||||
| Poisson rates | Known sigma Z | input kind = raw; known sigma = 2; null mean = 6 | ✓ Δ 6.7×10-17 (15+ digits) ↗ | ||||
| Poisson rates | Known sigma Z | input kind = summary; known sigma = 2; null mean = 6; sample size = 16; summary mean = 6.8125 | ✓ Δ 6.7×10-17 (15+ digits) ↗ | ||||
| Poisson rates | Known sigma Z | known sigma = 0; null mean = 6 | ✓ ↗ | ||||
| Poisson rates | Known sigma Z | known sigma = 2; null mean = 1000000006 | ✓ Δ 6.7×10-17 (15+ digits) ↗ | ||||
| Poisson rates | Known sigma Z | known sigma = 2; null mean = 6 | ✓ Δ 4.0×10-18 (15+ digits) ↗ | ||||
| Poisson rates | One poisson rate | alternative = greater; null rate = 0.15 | ✓ Δ 2.3×10-16 (15+ digits) ↗ | ||||
| Poisson rates | One poisson rate | alternative = less; null rate = 0.15 | ✓ Δ 1.1×10-16 (15+ digits) ↗ | ||||
| Poisson rates | One poisson rate | exposure unit = hours; input kind = raw; null rate = 0.15 | ✓ Δ 4.4×10-18 (15+ digits) ↗ | ||||
| Poisson rates | One poisson rate | input kind = summary; null rate = 0.15; summary count = 12; summary exposure = 80 | ✓ Δ 4.4×10-18 (15+ digits) ↗ | ||||
| Poisson rates | One poisson rate | null rate = 0.1 | ✓ Δ 7.1×10-18 (15+ digits) ↗ | ||||
| Poisson rates | One variance chi square | alternative = greater; null variance = 4 | ✓ Δ 3.3×10-15 (15+ digits) ↗ | ||||
| Poisson rates | One variance chi square | alternative = less; null variance = 4 | ✓ Δ 3.3×10-15 (15+ digits) ↗ | ||||
| Poisson rates | One variance chi square | input kind = raw; null variance = 4; variance display = sd | ✓ Δ 3.3×10-15 (15+ digits) ↗ | ||||
| Poisson rates | One variance chi square | input kind = summary; null variance = 4; sample size = 16; summary variance = 3.70917 | ✓ Δ 1.2×10-14 (14 digits) ↗ | ||||
| Poisson rates | One variance chi square | null variance = 1 | ✓ ↗ | ||||
| Poisson rates | Two poisson rate | alternative = greater; input kind = summary; null ratio = 1; summary count = 4; summary count 2 = 8; summary exposure = 38; summary exposure 2 = 42 | ✓ Δ 1.1×10-16 (15+ digits) ↗ | ||||
| Poisson rates | Two poisson rate | alternative = greater; null ratio = 1 | ✓ Δ 1.1×10-16 (15+ digits) ↗ | ||||
| Poisson rates | Two poisson rate | alternative = less; null ratio = 1 | ✓ Δ 3.6×10-18 (15+ digits) ↗ | ||||
| Poisson rates | Two poisson rate | exposure unit = days; input kind = raw; null ratio = 1 | ✓ Δ 5.2×10-17 (15+ digits) ↗ | ||||
| Related categorical outcomes | Bartlett | default settings | ✓ Δ 1.5×10-18 (15+ digits) ↗ | ||||
| Related categorical outcomes | Chi square association | default settings | ✓ exact ↗ | ||||
| Related categorical outcomes | Chi square gof | default settings | ✓ exact ↗ | ||||
| Related categorical outcomes | Classic | posthoc = no | ✓ Δ 3.2×10-15 (14 digits) ↗ | ||||
| Related categorical outcomes | F | default settings | ✓ Δ 6.2×10-15 (14 digits) ↗ | ||||
| Related categorical outcomes | Fisher | success value = yes | ✓ Δ 2.2×10-16 (15+ digits) ↗ | ||||
| Related categorical outcomes | Kruskal wallis | default settings | ✓ Δ 4.4×10-15 (13 digits) ↗ | ||||
| Related categorical outcomes | Levene | default settings | ✓ Δ 1.1×10-16 (15+ digits) ↗ | ||||
| Related categorical outcomes | Mann whitney | default settings | ✓ Δ 3.1×10-18 (15+ digits) ↗ | ||||
| Related categorical outcomes | Moods median | default settings | ✓ Δ 3.0×10-15 (14 digits) ↗ | ||||
| Related categorical outcomes | One proportion | success value = yes; target = 0.4 | ✓ Δ 2.8×10-16 (15+ digits) ↗ | ||||
| Related categorical outcomes | One sample t | alpha = 0 | ✓ ↗ | ||||
| Related categorical outcomes | One sample t | alpha = 0.1; target = 0 | ✓ Δ 3.9×10-18 (15+ digits) ↗ | ||||
| Related categorical outcomes | One sample t | alpha = 0.1; target = 5.96 | ✓ Δ 2.0×10-15 (13 digits) ↗ | ||||
| Related categorical outcomes | One sample t | alpha = 0.1; target = 5.97688 | ✓ Δ 3.0×10-16 (14 digits) ↗ | ||||
| Related categorical outcomes | One sample t | alternative = greater; target = 6.2 | ✓ Δ 1.6×10-15 (14 digits) ↗ | ||||
| Related categorical outcomes | One sample t | alternative = less; target = 6.2 | ✓ Δ 1.6×10-15 (14 digits) ↗ | ||||
| Related categorical outcomes | One sample t | alternative = two-sided; target = 6.2 | ✓ Δ 1.6×10-15 (14 digits) ⟨R⟩ ↗ | ||||
| Related categorical outcomes | One sample t | default settings | ✓ ↗ | ||||
| Related categorical outcomes | One sample t | target = 0 | ✓ Δ 4.8×10-16 (15+ digits) ↗ | ✓ ↗ | |||
| Related categorical outcomes | One sample t | target = 1000000006 | ✓ Δ 1.1×10-8 (7 digits) ↗ | ||||
| Related categorical outcomes | One sample t | target = 6 | ✓ Δ 2.6×10-15 (14 digits) ↗ | ||||
| Related categorical outcomes | One way ANOVA | posthoc = yes | ✓ Δ 7.1×10-15 (14 digits) ↗ | ||||
| Related categorical outcomes | Paired t | default settings | ✓ Δ 1.5×10-14 (13 digits) ⟨R⟩ ↗ | ||||
| Related categorical outcomes | Pooled | default settings | ✓ Δ 8.9×10-16 (14 digits) ↗ | ||||
| Related categorical outcomes | Sign | default settings | ✓ Δ 6.4×10-21 (15+ digits) ↗ | ||||
| Related categorical outcomes | Two way ANOVA | posthoc = no | ✓ Δ 5.7×10-15 (12 digits) ↗ | ||||
| Related categorical outcomes | Unsupported | default settings | ✓ ↗ | ||||
| Related categorical outcomes | Welch | default settings | ✓ Δ 6.6×10-15 (15+ digits) ⟨R⟩ ↗ | ||||
| Related categorical outcomes | Welch | posthoc = no | ✓ Δ 2.6×10-15 (14 digits) ↗ | ||||
| Related categorical outcomes | Wilcoxon | default settings | ✓ exact ↗ | ||||
| Related categorical outcomes | Z | success value = yes | ✓ Δ 5.8×10-17 (15+ digits) ↗ | ||||
| Stratified categorical association | Bartlett | default settings | ✓ Δ 1.5×10-18 (15+ digits) ↗ | ||||
| Stratified categorical association | Chi square association | default settings | ✓ exact ↗ | ||||
| Stratified categorical association | Chi square gof | default settings | ✓ exact ↗ | ||||
| Stratified categorical association | Classic | posthoc = no | ✓ Δ 3.2×10-15 (14 digits) ↗ | ||||
| Stratified categorical association | F | default settings | ✓ Δ 6.2×10-15 (14 digits) ↗ | ||||
| Stratified categorical association | Fisher | success value = yes | ✓ Δ 2.2×10-16 (15+ digits) ↗ | ||||
| Stratified categorical association | Kruskal wallis | default settings | ✓ Δ 4.4×10-15 (13 digits) ↗ | ||||
| Stratified categorical association | Levene | default settings | ✓ Δ 1.1×10-16 (15+ digits) ↗ | ||||
| Stratified categorical association | Mann whitney | default settings | ✓ Δ 3.1×10-18 (15+ digits) ↗ | ||||
| Stratified categorical association | Moods median | default settings | ✓ Δ 3.0×10-15 (14 digits) ↗ | ||||
| Stratified categorical association | One proportion | success value = yes; target = 0.4 | ✓ Δ 2.8×10-16 (15+ digits) ↗ | ||||
| Stratified categorical association | One sample t | alpha = 0 | ✓ ↗ | ||||
| Stratified categorical association | One sample t | alpha = 0.1; target = 0 | ✓ Δ 3.9×10-18 (15+ digits) ↗ | ||||
| Stratified categorical association | One sample t | alpha = 0.1; target = 5.96 | ✓ Δ 2.0×10-15 (13 digits) ↗ | ||||
| Stratified categorical association | One sample t | alpha = 0.1; target = 5.97688 | ✓ Δ 3.0×10-16 (14 digits) ↗ | ||||
| Stratified categorical association | One sample t | alternative = greater; target = 6.2 | ✓ Δ 1.6×10-15 (14 digits) ↗ | ||||
| Stratified categorical association | One sample t | alternative = less; target = 6.2 | ✓ Δ 1.6×10-15 (14 digits) ↗ | ||||
| Stratified categorical association | One sample t | alternative = two-sided; target = 6.2 | ✓ Δ 1.6×10-15 (14 digits) ⟨R⟩ ↗ | ||||
| Stratified categorical association | One sample t | default settings | ✓ ↗ | ||||
| Stratified categorical association | One sample t | target = 0 | ✓ Δ 4.8×10-16 (15+ digits) ↗ | ✓ ↗ | |||
| Stratified categorical association | One sample t | target = 1000000006 | ✓ Δ 1.1×10-8 (7 digits) ↗ | ||||
| Stratified categorical association | One sample t | target = 6 | ✓ Δ 2.6×10-15 (14 digits) ↗ | ||||
| Stratified categorical association | One way ANOVA | posthoc = yes | ✓ Δ 7.1×10-15 (14 digits) ↗ | ||||
| Stratified categorical association | Paired t | default settings | ✓ Δ 1.5×10-14 (13 digits) ⟨R⟩ ↗ | ||||
| Stratified categorical association | Pooled | default settings | ✓ Δ 8.9×10-16 (14 digits) ↗ | ||||
| Stratified categorical association | Sign | default settings | ✓ Δ 6.4×10-21 (15+ digits) ↗ | ||||
| Stratified categorical association | Two way ANOVA | posthoc = no | ✓ Δ 5.7×10-15 (12 digits) ↗ | ||||
| Stratified categorical association | Unsupported | default settings | ✓ ↗ | ||||
| Stratified categorical association | Welch | default settings | ✓ Δ 6.6×10-15 (15+ digits) ⟨R⟩ ↗ | ||||
| Stratified categorical association | Welch | posthoc = no | ✓ Δ 2.6×10-15 (14 digits) ↗ | ||||
| Stratified categorical association | Wilcoxon | default settings | ✓ exact ↗ | ||||
| Stratified categorical association | Z | success value = yes | ✓ Δ 5.8×10-17 (15+ digits) ↗ | ||||
| Trend in proportions | Bartlett | default settings | ✓ Δ 1.5×10-18 (15+ digits) ↗ | ||||
| Trend in proportions | Chi square association | default settings | ✓ exact ↗ | ||||
| Trend in proportions | Chi square gof | default settings | ✓ exact ↗ | ||||
| Trend in proportions | Classic | posthoc = no | ✓ Δ 3.2×10-15 (14 digits) ↗ | ||||
| Trend in proportions | F | default settings | ✓ Δ 6.2×10-15 (14 digits) ↗ | ||||
| Trend in proportions | Fisher | success value = yes | ✓ Δ 2.2×10-16 (15+ digits) ↗ | ||||
| Trend in proportions | Kruskal wallis | default settings | ✓ Δ 4.4×10-15 (13 digits) ↗ | ||||
| Trend in proportions | Levene | default settings | ✓ Δ 1.1×10-16 (15+ digits) ↗ | ||||
| Trend in proportions | Mann whitney | default settings | ✓ Δ 3.1×10-18 (15+ digits) ↗ | ||||
| Trend in proportions | Moods median | default settings | ✓ Δ 3.0×10-15 (14 digits) ↗ | ||||
| Trend in proportions | One proportion | success value = yes; target = 0.4 | ✓ Δ 2.8×10-16 (15+ digits) ↗ | ||||
| Trend in proportions | One sample t | alpha = 0 | ✓ ↗ | ||||
| Trend in proportions | One sample t | alpha = 0.1; target = 0 | ✓ Δ 3.9×10-18 (15+ digits) ↗ | ||||
| Trend in proportions | One sample t | alpha = 0.1; target = 5.96 | ✓ Δ 2.0×10-15 (13 digits) ↗ | ||||
| Trend in proportions | One sample t | alpha = 0.1; target = 5.97688 | ✓ Δ 3.0×10-16 (14 digits) ↗ | ||||
| Trend in proportions | One sample t | alternative = greater; target = 6.2 | ✓ Δ 1.6×10-15 (14 digits) ↗ | ||||
| Trend in proportions | One sample t | alternative = less; target = 6.2 | ✓ Δ 1.6×10-15 (14 digits) ↗ | ||||
| Trend in proportions | One sample t | alternative = two-sided; target = 6.2 | ✓ Δ 1.6×10-15 (14 digits) ⟨R⟩ ↗ | ||||
| Trend in proportions | One sample t | default settings | ✓ ↗ | ||||
| Trend in proportions | One sample t | target = 0 | ✓ Δ 4.8×10-16 (15+ digits) ↗ | ✓ ↗ | |||
| Trend in proportions | One sample t | target = 1000000006 | ✓ Δ 1.1×10-8 (7 digits) ↗ | ||||
| Trend in proportions | One sample t | target = 6 | ✓ Δ 2.6×10-15 (14 digits) ↗ | ||||
| Trend in proportions | One way ANOVA | posthoc = yes | ✓ Δ 7.1×10-15 (14 digits) ↗ | ||||
| Trend in proportions | Paired t | default settings | ✓ Δ 1.5×10-14 (13 digits) ⟨R⟩ ↗ | ||||
| Trend in proportions | Pooled | default settings | ✓ Δ 8.9×10-16 (14 digits) ↗ | ||||
| Trend in proportions | Sign | default settings | ✓ Δ 6.4×10-21 (15+ digits) ↗ | ||||
| Trend in proportions | Two way ANOVA | posthoc = no | ✓ Δ 5.7×10-15 (12 digits) ↗ | ||||
| Trend in proportions | Unsupported | default settings | ✓ ↗ | ||||
| Trend in proportions | Welch | default settings | ✓ Δ 6.6×10-15 (15+ digits) ⟨R⟩ ↗ | ||||
| Trend in proportions | Welch | posthoc = no | ✓ Δ 2.6×10-15 (14 digits) ↗ | ||||
| Trend in proportions | Wilcoxon | default settings | ✓ exact ↗ | ||||
| Trend in proportions | Z | success value = yes | ✓ Δ 5.8×10-17 (15+ digits) ↗ | ||||
| Two independent proportions | Bartlett | default settings | ✓ Δ 1.5×10-18 (15+ digits) ↗ | ||||
| Two independent proportions | Chi square association | default settings | ✓ exact ↗ | ||||
| Two independent proportions | Chi square gof | default settings | ✓ exact ↗ | ||||
| Two independent proportions | Classic | posthoc = no | ✓ Δ 3.2×10-15 (14 digits) ↗ | ||||
| Two independent proportions | F | default settings | ✓ Δ 6.2×10-15 (14 digits) ↗ | ||||
| Two independent proportions | Fisher | success value = yes | ✓ Δ 2.2×10-16 (15+ digits) ↗ | ||||
| Two independent proportions | Kruskal wallis | default settings | ✓ Δ 4.4×10-15 (13 digits) ↗ | ||||
| Two independent proportions | Levene | default settings | ✓ Δ 1.1×10-16 (15+ digits) ↗ | ||||
| Two independent proportions | Mann whitney | default settings | ✓ Δ 3.1×10-18 (15+ digits) ↗ | ||||
| Two independent proportions | Moods median | default settings | ✓ Δ 3.0×10-15 (14 digits) ↗ | ||||
| Two independent proportions | One proportion | success value = yes; target = 0.4 | ✓ Δ 2.8×10-16 (15+ digits) ↗ | ||||
| Two independent proportions | One sample t | alpha = 0 | ✓ ↗ | ||||
| Two independent proportions | One sample t | alpha = 0.1; target = 0 | ✓ Δ 3.9×10-18 (15+ digits) ↗ | ||||
| Two independent proportions | One sample t | alpha = 0.1; target = 5.96 | ✓ Δ 2.0×10-15 (13 digits) ↗ | ||||
| Two independent proportions | One sample t | alpha = 0.1; target = 5.97688 | ✓ Δ 3.0×10-16 (14 digits) ↗ | ||||
| Two independent proportions | One sample t | alternative = greater; target = 6.2 | ✓ Δ 1.6×10-15 (14 digits) ↗ | ||||
| Two independent proportions | One sample t | alternative = less; target = 6.2 | ✓ Δ 1.6×10-15 (14 digits) ↗ | ||||
| Two independent proportions | One sample t | alternative = two-sided; target = 6.2 | ✓ Δ 1.6×10-15 (14 digits) ⟨R⟩ ↗ | ||||
| Two independent proportions | One sample t | default settings | ✓ ↗ | ||||
| Two independent proportions | One sample t | target = 0 | ✓ Δ 4.8×10-16 (15+ digits) ↗ | ✓ ↗ | |||
| Two independent proportions | One sample t | target = 1000000006 | ✓ Δ 1.1×10-8 (7 digits) ↗ | ||||
| Two independent proportions | One sample t | target = 6 | ✓ Δ 2.6×10-15 (14 digits) ↗ | ||||
| Two independent proportions | One way ANOVA | posthoc = yes | ✓ Δ 7.1×10-15 (14 digits) ↗ | ||||
| Two independent proportions | Paired t | default settings | ✓ Δ 1.5×10-14 (13 digits) ⟨R⟩ ↗ | ||||
| Two independent proportions | Pooled | default settings | ✓ Δ 8.9×10-16 (14 digits) ↗ | ||||
| Two independent proportions | Sign | default settings | ✓ Δ 6.4×10-21 (15+ digits) ↗ | ||||
| Two independent proportions | Two way ANOVA | posthoc = no | ✓ Δ 5.7×10-15 (12 digits) ↗ | ||||
| Two independent proportions | Unsupported | default settings | ✓ ↗ | ||||
| Two independent proportions | Welch | default settings | ✓ Δ 6.6×10-15 (15+ digits) ⟨R⟩ ↗ | ||||
| Two independent proportions | Welch | posthoc = no | ✓ Δ 2.6×10-15 (14 digits) ↗ | ||||
| Two independent proportions | Wilcoxon | default settings | ✓ exact ↗ | ||||
| Two independent proportions | Z | success value = yes | ✓ Δ 5.8×10-17 (15+ digits) ↗ |
Statistics › Repeated measures & mixed models
| Window | Analysis | Settings compared | NIST | R | Analytical | Published example | Independent reviewer |
|---|---|---|---|---|---|---|---|
| Binomial and Poisson mixed models | Binomial | event value = 1; family = binomial | ✓ Δ 7.1×10-15 (15+ digits) ↗ | ||||
| Binomial and Poisson mixed models | Poisson | family = poisson | ✓ Δ 7.4×10-15 (15+ digits) ↗ | ||||
| Generalized estimating equations | Binomial | family = binomial; working correlation = exchangeable | ✓ Δ 4.5×10-16 (14 digits) ↗ | ||||
| Generalized estimating equations | Poisson | family = poisson; working correlation = independence | ✓ Δ 3.3×10-16 (14 digits) ↗ | ||||
| Linear mixed models | Large-offset random-slope mixed model | estimation = reml; model mode = random_slope | ✓ Δ 3.5×10-14 (13 digits) ↗ | ||||
| Linear mixed models | Linear mixed models | bad setting = 1; estimation = reml | ✓ ↗ | ||||
| Linear mixed models | Linear mixed models | bad setting = 1; estimation = reml; model mode = random_slope | ✓ ↗ | ||||
| Linear mixed models | Linear mixed models | components = name a, level column a, relation crossed, name ab, level column ab, relation nested, parent column a; estimation = reml; max rows = 1000; model mode = variance_components | ✓ Δ 4.8×10-12 (11 digits) ↗ | ||||
| Linear mixed models | Linear mixed models | components = name a, level column a, relation crossed, name b, level column b, relation crossed; estimation = ml; max rows = 1000; model mode = variance_components | ✓ Δ 2.9×10-13 (12 digits) ↗ | ||||
| Linear mixed models | Linear mixed models | components = name a, level column a, relation crossed, name b, level column b, relation crossed; estimation = reml; max rows = 1000; model mode = variance_components | ✓ Δ 2.5×10-11 (10 digits) ↗ | ||||
| Linear mixed models | Linear mixed models | estimation = ml | ✓ Δ 4.4×10-16 (15+ digits) ↗ | ||||
| Linear mixed models | Linear mixed models | estimation = reml | ✓ Δ 8.1×10-11 (9 digits) ↗ | ✓ ↗ | |||
| Linear mixed models | Linear mixed models | estimation = reml; model mode = random_slope | ✓ Δ 4.4×10-8 (7 digits) ↗ | ✓ ↗ | |||
| Linear mixed models | Regression edge | estimation = reml | ✓ Δ 4.1×10-11 (9 digits) ↗ | ||||
| Linear mixed models | Regression edge | estimation = reml; model mode = random_slope | ✓ ↗ | ||||
| Panel fixed-effects regression | Panel fixed-effects regression | bad setting = 1 | ✓ ↗ | ||||
| Panel fixed-effects regression | Panel fixed-effects regression | confidence level = 0.9 | ✓ Δ 2.8×10-18 (15+ digits) ↗ | ||||
| Panel fixed-effects regression | Panel fixed-effects regression | default settings | ✓ Δ 4.4×10-16 (15+ digits) ↗ | ✓ ↗ | |||
| Panel fixed-effects regression | Regression edge | default settings | ✓ Δ 4.4×10-16 (15+ digits) ↗ | ||||
| Rank comparisons & concordance | Bartlett | default settings | ✓ Δ 1.5×10-18 (15+ digits) ↗ | ||||
| Rank comparisons & concordance | Chi square association | default settings | ✓ exact ↗ | ||||
| Rank comparisons & concordance | Chi square gof | default settings | ✓ exact ↗ | ||||
| Rank comparisons & concordance | Classic | posthoc = no | ✓ Δ 3.2×10-15 (14 digits) ↗ | ||||
| Rank comparisons & concordance | F | default settings | ✓ Δ 6.2×10-15 (14 digits) ↗ | ||||
| Rank comparisons & concordance | Fisher | success value = yes | ✓ Δ 2.2×10-16 (15+ digits) ↗ | ||||
| Rank comparisons & concordance | Friedman | alternative = less | ✓ ↗ | ||||
| Rank comparisons & concordance | Friedman | default settings | ✓ Δ 3.1×10-18 (15+ digits) ↗ | ✓ ↗ | |||
| Rank comparisons & concordance | Friedman | max blocks = 10; max rows = 100 | ✓ Δ 2.3×10-18 (15+ digits) ↗ | ||||
| Rank comparisons & concordance | Kruskal wallis | default settings | ✓ Δ 4.4×10-15 (13 digits) ↗ | ||||
| Rank comparisons & concordance | Levene | default settings | ✓ Δ 1.1×10-16 (15+ digits) ↗ | ||||
| Rank comparisons & concordance | Mann whitney | default settings | ✓ Δ 3.1×10-18 (15+ digits) ↗ | ||||
| Rank comparisons & concordance | Moods median | default settings | ✓ Δ 3.0×10-15 (14 digits) ↗ | ||||
| Rank comparisons & concordance | One proportion | success value = yes; target = 0.4 | ✓ Δ 2.8×10-16 (15+ digits) ↗ | ||||
| Rank comparisons & concordance | One sample t | alpha = 0 | ✓ ↗ | ||||
| Rank comparisons & concordance | One sample t | alpha = 0.1; target = 0 | ✓ Δ 3.9×10-18 (15+ digits) ↗ | ||||
| Rank comparisons & concordance | One sample t | alpha = 0.1; target = 5.96 | ✓ Δ 2.0×10-15 (13 digits) ↗ | ||||
| Rank comparisons & concordance | One sample t | alpha = 0.1; target = 5.97688 | ✓ Δ 3.0×10-16 (14 digits) ↗ | ||||
| Rank comparisons & concordance | One sample t | alternative = greater; target = 6.2 | ✓ Δ 1.6×10-15 (14 digits) ↗ | ||||
| Rank comparisons & concordance | One sample t | alternative = less; target = 6.2 | ✓ Δ 1.6×10-15 (14 digits) ↗ | ||||
| Rank comparisons & concordance | One sample t | alternative = two-sided; target = 6.2 | ✓ Δ 1.6×10-15 (14 digits) ⟨R⟩ ↗ | ||||
| Rank comparisons & concordance | One sample t | default settings | ✓ ↗ | ||||
| Rank comparisons & concordance | One sample t | target = 0 | ✓ Δ 4.8×10-16 (15+ digits) ↗ | ✓ ↗ | |||
| Rank comparisons & concordance | One sample t | target = 1000000006 | ✓ Δ 1.1×10-8 (7 digits) ↗ | ||||
| Rank comparisons & concordance | One sample t | target = 6 | ✓ Δ 2.6×10-15 (14 digits) ↗ | ||||
| Rank comparisons & concordance | One way ANOVA | posthoc = yes | ✓ Δ 7.1×10-15 (14 digits) ↗ | ||||
| Rank comparisons & concordance | Paired t | default settings | ✓ Δ 1.5×10-14 (13 digits) ⟨R⟩ ↗ | ||||
| Rank comparisons & concordance | Pooled | default settings | ✓ Δ 8.9×10-16 (14 digits) ↗ | ||||
| Rank comparisons & concordance | Runs | alternative = greater; inference = exact; reference mode = fixed; reference value = 6 | ✓ Δ 1.4×10-18 (15+ digits) ↗ | ||||
| Rank comparisons & concordance | Runs | alternative = less; inference = exact; reference mode = fixed; reference value = 6 | ✓ Δ 1.0×10-19 (15+ digits) ↗ | ||||
| Rank comparisons & concordance | Runs | alternative = two-sided; inference = asymptotic; max exact n = 20; reference mode = median | ✓ Δ 1.7×10-18 (15+ digits) ↗ | ||||
| Rank comparisons & concordance | Runs | default settings | ✓ ↗ | ||||
| Rank comparisons & concordance | Runs | inference = asymptotic | ✓ Δ 1.7×10-18 (15+ digits) ↗ | ||||
| Rank comparisons & concordance | Runs | inference = asymptotic; reference mode = median | ✓ ↗ | ||||
| Rank comparisons & concordance | Sign | default settings | ✓ Δ 6.4×10-21 (15+ digits) ↗ | ||||
| Rank comparisons & concordance | Two way ANOVA | posthoc = no | ✓ Δ 5.7×10-15 (12 digits) ↗ | ||||
| Rank comparisons & concordance | Unsupported | default settings | ✓ ↗ | ||||
| Rank comparisons & concordance | Welch | default settings | ✓ Δ 6.6×10-15 (15+ digits) ⟨R⟩ ↗ | ||||
| Rank comparisons & concordance | Welch | posthoc = no | ✓ Δ 2.6×10-15 (14 digits) ↗ | ||||
| Rank comparisons & concordance | Wilcoxon | default settings | ✓ exact ↗ | ||||
| Rank comparisons & concordance | Z | success value = yes | ✓ Δ 5.8×10-17 (15+ digits) ↗ | ||||
| Repeated-measures ANOVA | Repeated measures one within factor three levels | cells = t1, t2, t3; contrast family = none; pairwise procedure = none | ✓ Δ 4.5×10-9 (9 digits) ↗ | ||||
| Repeated-measures ANOVA | Repeated measures two occasions equals paired t squared | cells = t1, t2; contrast family = none; pairwise procedure = none | ✓ Δ 9.7×10-15 (14 digits) ↗ | ||||
| Repeated-measures ANOVA | Repeated measures two within factors 2 x 2 | cells = t1, t2, t3, t4; contrast family = none; pairwise procedure = none | ✓ Δ 7.1×10-14 (13 digits) ↗ | ||||
| Repeated-measures ANOVA | Repeated measures with a balanced between-subject factor | between = grp; cells = t1, t2, t3; contrast family = none; pairwise procedure = none | ✓ Δ 6.9×10-9 (10 digits) ↗ | ||||
| Repeated-measures covariance models | Balanced random-intercept Satterthwaite df equal the classical stratum df | confidence level = 0.95; estimation = reml; max rows = 20000; occasion spacing = None; random intercept = yes; residual structure = independent | ✓ Δ 6.4×10-14 (14 digits) ↗ | ||||
| Repeated-measures covariance models | Independent equal-variance REML repeated-measures model reproduces OLS | confidence level = 0.95; estimation = reml; max rows = 20000; occasion spacing = None; random intercept = no; residual structure = independent | ✓ Δ 4.3×10-8 (7 digits) ↗ |
Statistics › Summaries & tables
| Window | Analysis | Settings compared | NIST | R | Analytical | Published example | Independent reviewer |
|---|---|---|---|---|---|---|---|
| Case listing & summaries | Case summaries by group: five listed, statistics on every case | limit = 5; metadata = score variable label Test score, user missing values 999, grade variable label Grade, measurement level nominal, valu...; statistics = yes | ✓ Δ 2.8×10-16 (15+ digits) ↗ | ||||
| Case listing & summaries | Case summaries under an integer frequency weight | limit = 100; metadata = score variable label Test score, user missing values 999, grade variable label Grade, measurement level nominal, valu...; statistics = yes | ✓ Δ 3.4×10-15 (15+ digits) ↗ | ||||
| Custom table builder | Custom table: column proportion comparisons with Holm letters | adjustment = holm; alpha = 0.05; compare = proportions; independence = no; rows = dept; statistics = count, column_percent; totals = yes | ✓ Δ 1.1×10-16 (14 digits) ↗ | ||||
| Custom table builder | Custom table: counts, column, row and table percents, chi-square | adjustment = holm; alpha = 0.05; compare = none; independence = yes; rows = dept; statistics = count, column_percent, row_percent, table_percent; totals = yes | ✓ Δ 4.0×10-16 (15+ digits) ↗ | ||||
| Custom table builder | Custom table: nested rows with subtotals and outer-group column percents | adjustment = holm; alpha = 0.05; compare = none; independence = no; rows = dept, level; statistics = count, column_percent, layer_percent; totals = yes | ✓ Δ 4.0×10-16 (15+ digits) ↗ | ||||
| Custom table builder | Custom table: scale summaries and Welch mean comparisons with Bonferroni | adjustment = bonferroni; alpha = 0.05; compare = means; independence = no; rows = dept; statistics = mean, sd, median, valid_n, count; summary = sales; totals = yes | ✓ Δ 4.6×10-16 (14 digits) ↗ | ||||
| Descriptive statistics | Categorical | include margins = no; kind = categorical | ✓ exact ↗ | ||||
| Descriptive statistics | Categorical | include margins = yes; kind = categorical; overall percentages = yes; row percentages = yes | ✓ exact ↗ | ||||
| Descriptive statistics | Descriptive summary of a column with user-missing values masked | metadata = score variable label Test score, user missing values 999, grade variable label Grade, measurement level nominal, valu... | ✓ Δ 1.6×10-16 (15+ digits) ↗ | ||||
| Descriptive statistics | Descriptive summary under a frequency weight after exclusions | metadata = score variable label Test score, user missing values 999, grade variable label Grade, measurement level nominal, valu... | ✓ Δ 4.2×10-16 (15+ digits) ↗ | ||||
| Descriptive statistics | Explore by factor with Tukey's hinges, a 90% interval and exclusions | confidence level = 0.9; dependents = score; metadata = score variable label Test score, user missing values 999, grade variable label Grade, measurement level nominal, valu...; quartiles = tukey_hinges | ✓ Δ 8.8×10-9 (9 digits) ↗ | ||||
| Descriptive statistics | Explore one dependent: descriptives, M-estimators, extremes, normality, box | confidence level = 0.95; dependents = score; metadata = score variable label Test score, user missing values 999, grade variable label Grade, measurement level nominal, valu...; quartiles = haverage | ✓ Δ 3.9×10-9 (9 digits) ↗ | ||||
| Descriptive statistics | Numeric | kind = numeric | ✓ Δ 1.1×10-9 (8 digits) ↗ | ✓ Δ 1.2×10-7 (15+ digits) ↗ | |||
| Frequencies | Frequencies cut points after row exclusions, no statistics | cut points = 4; metadata = score variable label Test score, user missing values 999, grade variable label Grade, measurement level nominal, valu...; quartiles = no; statistics = no; user missing valid = no | ✓ Δ 3.4×10-15 (15+ digits) ↗ | ||||
| Frequencies | Frequencies treating user-missing values as valid | metadata = score variable label Test score, user missing values 999, grade variable label Grade, measurement level nominal, valu...; percentiles = 50; quartiles = no; statistics = yes; user missing valid = yes | ✓ Δ 5.8×10-14 (15+ digits) ↗ | ||||
| Frequencies | Frequencies with labels, user-missing codes and type-6 percentiles | metadata = score variable label Test score, user missing values 999, grade variable label Grade, measurement level nominal, valu...; percentiles = 10, 90; quartiles = yes; statistics = yes; user missing valid = no | ✓ Δ 1.1×10-14 (15+ digits) ↗ | ||||
| Variable codebook | Codebook: scale summary, labelled categories and missing counts | metadata = score variable label Test score, user missing values 999, grade variable label Grade, measurement level nominal, valu... | ✓ Δ 4.0×10-15 (15+ digits) ↗ |
Statistics › Survival
| Window | Analysis | Settings compared | NIST | R | Analytical | Published example | Independent reviewer |
|---|---|---|---|---|---|---|---|
| Actuarial life tables | Actuarial life table with 2-unit intervals to 10 | censored value = 0; event value = 1; interval width = 2; last boundary = 10; status = status; time = time | ✓ Δ 1.0×10-17 (15+ digits) ↗ | ||||
| Actuarial life tables | Scheduled visits with text status values and the grouped PH score test | boundaries = 0, 1, 2, 3, 4, 5, 6; censored value = censored; event value = event; observation model = scheduled_visits; status = status; strata = group; time = time | ✓ Δ 1.9×10-17 (15+ digits) ↗ | ||||
| Actuarial life tables | Unequal boundaries with two strata and the grouped Gehan test | boundaries = 0, 1, 3, 6, 12; censored value = 0; event value = 1; status = status; strata = group; time = time | ✓ Δ 2.9×10-15 (14 digits) ↗ | ||||
| Cox regression | Breslow ties with the robust sandwich variance | categorical covariates = trt; censored value = 0; event value = 1; layout = counting_process; numeric covariates = x; robust = yes; start = start; status = status; stop = stop; subject = id; ties = breslow | ✓ Δ 7.4×10-15 (14 digits) ↗ | ||||
| Cox regression | Counting-process Cox model with Efron ties | categorical covariates = trt; censored value = 0; event value = 1; layout = counting_process; numeric covariates = x; start = start; status = status; stop = stop; subject = id | ✓ Δ 1.4×10-14 (14 digits) ↗ | ||||
| Cox regression | Cox regression | censored value = 0; confidence level = 0.9; event value = 1 | ✓ ↗ | ||||
| Cox regression | Cox regression | censored value = 0; event value = 1 | ✓ Δ 8.7×10-10 (8 digits) ↗ | ✓ ↗ | |||
| Cox regression | One row per subject with the covariate-by-time term x t | categorical covariates = trt; censored value = 0; event value = 1; layout = one_row; numeric covariates = x; status = status; stop = time; time covariates = x; time function = time | ✓ Δ 1.6×10-10 (11 digits) ↗ | ||||
| Cox regression | One row per subject with the step function x 1{t > 8} | categorical covariates = trt; censored value = 0; event value = 1; layout = one_row; numeric covariates = x; status = status; step time = 8; stop = time; time covariates = x; time function = step | ✓ Δ 3.1×10-11 (11 digits) ↗ | ||||
| Cox regression | Stratified baseline hazards by sex with 90% intervals | categorical covariates = trt; censored value = 0; confidence level = 0.9; event value = 1; layout = counting_process; numeric covariates = x; start = start; status = status; stop = stop; strata = sex; subject = id | ✓ Δ 1.1×10-13 (13 digits) ↗ | ||||
| Cox regression | Survival | censored value = 0; event value = 1 | ✓ Δ 3.7×10-18 (15+ digits) ↗ | ||||
| Cox regression | Survival corrected option | censored value = 0; confidence level = 0.95; event value = 1; max diagnostic rows = 100; max iterations = 300 | ✓ Δ 8.6×10-14 (11 digits) ↗ | ||||
| Cox regression | Survival option | censored value = 0; confidence level = 0.95; event value = 1; max diagnostic rows = 100; max iterations = 300 | ✓ Δ 4.7×10-14 (13 digits) ↗ | ||||
| Cox regression | Survival option | censored value = 0; confidence level = 0.9; event value = 1; max diagnostic rows = 100; max iterations = 300 | ✓ ↗ | ||||
| Cox regression | Survival population | censored value = 0; event value = 1 | ✓ Δ 1.9×10-14 (13 digits) ↗ | ||||
| Kaplan-Meier survival curves | Kaplan-Meier survival curves | censored value = 0; confidence level = 0.4; event value = 1 | ✓ ↗ | ||||
| Kaplan-Meier survival curves | Kaplan-Meier survival curves | censored value = 0; event value = 1 | ✓ Δ 2.5×10-11 (15+ digits) ↗ | ✓ ↗ | not assessed | ||
| Kaplan-Meier survival curves | Kaplan-Meier survival curves | censored value = 0; event value = 1; times = 0, 1, 2 | ✓ exact ↗ | ||||
| Kaplan-Meier survival curves | Kaplan-Meier survival curves | censored value = 0; event value = 1; times = 1, 5, 6 | ✓ exact ↗ | ||||
| Kaplan-Meier survival curves | Kaplan-Meier survival curves | censored value = 0; event value = 1; times = 1000137, 1001370, 1005500 | ✓ exact ↗ | ||||
| Kaplan-Meier survival curves | Kaplan-Meier survival curves | censored value = 0; event value = 1; times = six | ✓ ↗ | ||||
| Kaplan-Meier survival curves | Kaplan-Meier survival curves | censored value = 1; event value = 1 | ✓ ↗ | ||||
| Kaplan-Meier survival curves | Survival | censored value = 0; event value = 1 | ✓ Δ 4.5×10-16 (15+ digits) ↗ | ||||
| Kaplan-Meier survival curves | Survival | censored value = 0; event value = 1; times = 6, 7, 10, 23 | ✓ exact ↗ | ||||
| Kaplan-Meier survival curves | Survival option | censored value = 0; confidence level = 0.9; event value = 1 | ✓ Δ 1.1×10-16 (15+ digits) ↗ | ||||
| Kaplan-Meier survival curves | Survival population | censored value = 0; event value = 1 | ✓ exact ↗ | ||||
| Kaplan-Meier survival curves | Survival population | censored value = 0; event value = 1; times = 7, 10, 15, 20 | ✓ exact ↗ |
Survey
| Window | Analysis | Settings compared | NIST | R | Analytical | Published example | Independent reviewer |
|---|---|---|---|---|---|---|---|
| Calibrate weights | no comparison case yet | ||||||
| Count regression | no comparison case yet | ||||||
| Cox regression | Survey Cox regression (Taylor) | confidence level = 0.95; covariates = x; design = weight w, variance linearization, stage1 strata h, units psu; event value = event; status = status; time = time | ✓ Δ 1.4×10-14 (14 digits) ↗ | ||||
| Cox regression | Survey Cox regression from supplied replicate weights with 90% intervals | confidence level = 0.9; covariates = x; design = weight w, variance replicate, replicates columns rw1, rw2, rw3, rw4, method other, weight type full, scale 0.75, rsca...; event value = event; status = status; time = time | ✓ Δ 5.0×10-9 (8 digits) ↗ | ||||
| Frequencies and crosstabs | Survey crosstab with a first-stage FPC and 90% intervals | confidence level = 0.9; design = weight w, variance linearization, stage1 strata h, units psu, fpc N, fpc kind count | ✓ Δ 1.4×10-14 (12 digits) ↗ | ||||
| Frequencies and crosstabs | Survey crosstab with the second-order Rao-Scott F | confidence level = 0.95; design = weight w, variance linearization, stage1 strata h, units psu | ✓ Δ 6.4×10-14 (12 digits) ↗ | ||||
| Frequencies and crosstabs | Survey one-way frequencies in a domain | confidence level = 0.95; design = weight w, variance linearization, stage1 strata h, units psu; domain values = B | ✓ Δ 2.3×10-13 (13 digits) ↗ | ||||
| Generate replicate weights | no comparison case yet | ||||||
| Item consistency (Cronbach's alpha) | Configuration axis | aggregation = sum; names = scale_sum | ✓ exact ↗ | ||||
| Item consistency (Cronbach's alpha) | Item consistency (Cronbach's alpha) | aggregation = mean; names = scale_score | ✓ exact ↗ | ||||
| Item consistency (Cronbach's alpha) | Item consistency (Cronbach's alpha) | aggregation = mean; names = score | ✓ ↗ | ||||
| Item consistency (Cronbach's alpha) | Item consistency (Cronbach's alpha) | aggregation = mean; names = score; unknown option = 1 | ✓ ↗ | ||||
| Item consistency (Cronbach's alpha) | Item consistency (Cronbach's alpha) | items = i1 | ✓ ↗ | ||||
| Item consistency (Cronbach's alpha) | Item consistency (Cronbach's alpha) | items = i1, i2 | ✓ exact ↗ | ||||
| Item consistency (Cronbach's alpha) | Item consistency (Cronbach's alpha) | items = i1, i2, i3 | ✓ Δ 1.9×10-18 (15+ digits) ↗ | ||||
| Item consistency (Cronbach's alpha) | Item consistency (Cronbach's alpha) | items = i1, i2; reverse items = i3; scale high = 5; scale low = 1 | ✓ ↗ | ||||
| Item consistency (Cronbach's alpha) | Item consistency (Cronbach's alpha) | items = i1, i3 | ✓ exact ↗ | ||||
| Item consistency (Cronbach's alpha) | Missing and excluded multivariate population | items = i1, i2, i3 | ✓ Δ 2.2×10-18 (15+ digits) ↗ | ||||
| Item consistency (Cronbach's alpha) | Multivariate | items = i1, i2, i3 | ✓ Δ 2.2×10-16 (15+ digits) ↗ | ||||
| Item consistency (Cronbach's alpha) | Multivariate option | items = i1, i2, i3; reverse items = i3; scale high = 5; scale low = 1 | ✓ Δ 1.3×10-15 (15+ digits) ↗ | ||||
| Item consistency (Cronbach's alpha) | Retained correction | aggregation = mean; names = scale_score | ✓ exact ↗ | ||||
| Item consistency (Cronbach's alpha) | Retained scoring | aggregation = mean; names = scale_score | ✓ Δ 4.1×10-17 (15+ digits) ↗ | ||||
| Linear regression | Survey linear regression with an interaction and 90% intervals | confidence level = 0.9; covariates = x; design = weight w, variance linearization, stage1 strata h, units psu; inference = design_df; interactions = grp:x | ✓ Δ 6.8×10-14 (14 digits) ↗ | ||||
| Linear regression | Survey linear regression with design-df t and F inference | confidence level = 0.95; covariates = x; design = weight w, variance linearization, stage1 strata h, units psu; inference = design_df | ✓ Δ 5.5×10-13 (13 digits) ↗ | ||||
| Linear regression | Survey linear regression with normal inference | confidence level = 0.95; covariates = x; design = weight w, variance linearization, stage1 strata h, units psu; inference = normal | ✓ Δ 1.7×10-12 (12 digits) ↗ | ||||
| Logistic regression | Survey logistic regression with a first-stage FPC and 90% intervals | confidence level = 0.9; covariates = x; design = weight w, variance linearization, stage1 strata h, units psu, fpc N, fpc kind count; event value = yes; inference = design_df | ✓ Δ 4.6×10-11 (12 digits) ↗ | ||||
| Logistic regression | Survey logistic regression with design-df inference | confidence level = 0.95; covariates = x; design = weight w, variance linearization, stage1 strata h, units psu; event value = yes; inference = design_df | ✓ Δ 1.7×10-10 (11 digits) ↗ | ||||
| Logistic regression | Survey logistic regression with normal inference | confidence level = 0.95; covariates = x; design = weight w, variance linearization, stage1 strata h, units psu; event value = yes; inference = normal | ✓ Δ 5.9×10-11 (11 digits) ↗ | ||||
| Means, totals and proportions | Survey domain estimates with 90% intervals | bounded interval = none; confidence level = 0.9; design = weight w, variance linearization, stage1 strata h, units psu; design effect = none; domain values = A | ✓ Δ 6.2×10-14 (14 digits) ↗ | ||||
| Means, totals and proportions | Survey mean and proportion from supplied replicate weights | bounded interval = none; confidence level = 0.95; design = weight w, variance replicate, replicates columns rw1, rw2, rw3, rw4, method other, weight type full, scale 0.75, rsca...; design effect = none | ✓ Δ 8.5×10-15 (13 digits) ↗ | ||||
| Means, totals and proportions | Survey mean and total with a first-stage FPC | bounded interval = none; confidence level = 0.95; design = weight w, variance linearization, stage1 strata h, units psu, fpc N, fpc kind count; design effect = none | ✓ Δ 6.8×10-13 (15+ digits) ↗ | ||||
| Means, totals and proportions | Survey mean, total, proportions and counts (Taylor) | bounded interval = none; confidence level = 0.95; design = weight w, variance linearization, stage1 strata h, units psu; design effect = none | ✓ Δ 4.5×10-13 (13 digits) ↗ | ||||
| Means, totals and proportions | Survey proportion with Korn-Graubard limits and SRS design effect | bounded interval = korn_graubard; confidence level = 0.95; design = weight w, variance linearization, stage1 strata h, units psu; design effect = srs_wr | ✓ Δ 4.4×10-13 (14 digits) ↗ | ||||
| Means, totals and proportions | Survey proportion with a delta-logit interval | bounded interval = delta_logit; confidence level = 0.95; design = weight w, variance linearization, stage1 strata h, units psu; design effect = none | ✓ Δ 5.6×10-16 (14 digits) ↗ | ||||
| Multinomial regression | no comparison case yet | ||||||
| Ordinal regression | Survey proportional-odds regression (Taylor) | confidence level = 0.95; covariates = x; design = weight w, variance linearization, stage1 strata h, units psu; level order = low, mid, high | ✓ Δ 1.5×10-13 (14 digits) ↗ | ||||
| Ordinal regression | Survey proportional-odds regression in a domain with 90% intervals | confidence level = 0.9; covariates = x; design = weight w, variance linearization, stage1 strata h, units psu; domain values = A; level order = low, mid, high | ✓ Δ 9.7×10-13 (11 digits) ↗ | ||||
| Rater agreement | Rater agreement: Fleiss' kappa for three raters with missing ratings | alpha metric = nominal; categories = 1, 2, 3, 4; confidence level = 0.95; kappa bootstrap = no; raters = r1, r2, r3; replicates = 500; seed = 20260928 | ✓ Δ 3.6×10-17 (14 digits) ↗ | ||||
| Rater agreement | Rater agreement: linear-weighted kappa and ordinal alpha | alpha metric = ordinal; categories = 1, 2, 3, 4; confidence level = 0.95; kappa bootstrap = no; raters = r1, r2; replicates = 500; seed = 20260928 | ✓ Δ 5.6×10-16 (11 digits) ↗ | ||||
| Rater agreement | Rater agreement: quadratic-weighted kappa at 90% and interval alpha | alpha metric = interval; categories = 1, 2, 3, 4; confidence level = 0.9; kappa bootstrap = no; raters = r1, r2; replicates = 500; seed = 20260928 | ✓ Δ 1.1×10-14 (12 digits) ↗ | ||||
| Rater agreement | Rater agreement: unweighted Cohen's kappa and nominal alpha | alpha metric = nominal; confidence level = 0.95; kappa bootstrap = no; raters = r1, r2; replicates = 500; seed = 20260928 | ✓ Δ 1.1×10-16 (13 digits) ↗ | ||||
| Ratios | Survey ratio from supplied replicate weights | confidence level = 0.95; denominator = x; design = weight w, variance replicate, replicates columns rw1, rw2, rw3, rw4, method other, weight type full, scale 0.75, rsca...; numerators = y | ✓ Δ 4.5×10-15 (13 digits) ↗ | ||||
| Ratios | Survey ratio of weighted totals (Taylor) | confidence level = 0.95; denominator = x; design = weight w, variance linearization, stage1 strata h, units psu; numerators = y | ✓ Δ 1.7×10-15 (14 digits) ↗ | ||||
| Ratios | Survey ratios of two numerators in a domain | confidence level = 0.9; denominator = x; design = weight w, variance linearization, stage1 strata h, units psu; domain values = A; numerators = y, z | ✓ Δ 4.9×10-16 (15+ digits) ↗ | ||||
| Scale reliability | Scale reliability of four items without reversal or ICC | confidence level = 0.95; icc model = none; icc type = consistency; items = i1, i2, i3, i5; split = halves | ✓ Δ 5.0×10-14 (14 digits) ↗ | ||||
| Scale reliability | Scale reliability with a declared split and one-way ICC at 90% | confidence level = 0.9; first half = i2, i5; icc model = one_way; icc type = consistency; items = i1, i2, i3, i4, i5; reverse items = i4; scale high = 5; scale low = 1; split = custom | ✓ Δ 3.7×10-14 (13 digits) ↗ | ||||
| Scale reliability | Scale reliability with a reverse-coded item (halves split, ICC(3,1)) | confidence level = 0.95; icc model = two_way_mixed; icc type = consistency; items = i1, i2, i3, i4, i5; reverse items = i4; scale high = 5; scale low = 1; split = halves | ✓ Δ 3.7×10-14 (13 digits) ↗ | ||||
| Scale reliability | Scale reliability with an odd/even split and ICC(2,1) absolute agreement | confidence level = 0.95; icc model = two_way_random; icc type = agreement; items = i1, i2, i3, i4, i5; reverse items = i4; scale high = 5; scale low = 1; split = odd_even | ✓ Δ 3.7×10-14 (13 digits) ↗ | ||||
| Survey means and proportions | Survey mean | mode = mean | ✓ Δ 4.1×10-16 (15+ digits) ↗ | ||||
| Survey means and proportions | Survey proportion | mode = proportion | ✓ Δ 3.0×10-17 (15+ digits) ↗ |
Time Series
| Window | Analysis | Settings compared | NIST | R | Analytical | Published example | Independent reviewer |
|---|---|---|---|---|---|---|---|
| ACF & PACF | Biased sample ACF and lag-one PACF | maximum lag = 5; task = correlations | ✓ Δ 3.4×10-16 (15+ digits) ↗ | ||||
| ACF & PACF | NIST Lew: acf | maximum lag = 1; task = correlations | ✓ Δ 4.4×10-16 (14 digits) ↗ | ||||
| ACF & PACF | NIST Lottery: acf | maximum lag = 1; task = correlations | ✓ Δ 1.2×10-16 (15+ digits) ↗ | ||||
| ACF & PACF | NIST Mavro: acf | maximum lag = 1; task = correlations | ✓ Δ 1.7×10-14 (13 digits) ↗ | ||||
| ACF & PACF | NIST Michelso: acf | maximum lag = 1; task = correlations | ✓ Δ 2.0×10-14 (13 digits) ↗ | ||||
| ACF & PACF | NIST NumAcc2: acf | maximum lag = 1; task = correlations | ✓ Δ 1.1×10-16 (15+ digits) ↗ | ||||
| ACF & PACF | NIST NumAcc3: acf | maximum lag = 1; task = correlations | ✓ Δ 8.9×10-19 (15+ digits) ↗ | ||||
| ACF & PACF | NIST NumAcc4: acf | maximum lag = 1; task = correlations | ✓ Δ 2.2×10-16 (15+ digits) ↗ | ||||
| ACF & PACF | NIST PiDigits: acf | maximum lag = 1; task = correlations | ✓ Δ 1.6×10-18 (15+ digits) ↗ | ||||
| Compare and validate forecasts | Study | forecast = response column rw, model naive, horizon 3; validation = initial window 40, horizon 3, final evaluation 6 | ✓ Δ 3.1×10-15 (14 digits) ↗ | ||||
| Cross-correlation | A 1e8 offset leaves the correlations unchanged | max lag = 4 | ✓ Δ 9.8×10-10 (8 digits) ↗ | ||||
| Cross-correlation | A delayed copy peaks at its delay | max lag = 8 | ✓ Δ 2.3×10-16 (15+ digits) ↗ | ||||
| Cross-correlation | A duplicated time key is refused | max lag = 4 | ✓ ↗ | ||||
| Cross-correlation | A maximum lag above 250 is refused | max lag = 251 | ✓ ↗ | ||||
| Cross-correlation | First differences of both series | max lag = 5 | ✓ Δ 4.4×10-16 (15+ digits) ↗ | ||||
| Cross-correlation | Lags with fewer than three pairs are omitted | max lag = 30 | ✓ Δ 5.4×10-17 (14 digits) ↗ | ||||
| Cross-correlation | Missing and excluded rows stay as unavailable positions | max lag = 6 | ✓ Δ 3.3×10-16 (15+ digits) ↗ | ||||
| Cross-correlation | Prewhitening with an OLS AR(2) fit | max lag = 5; prewhiten = yes; prewhiten order = 2 | ✓ Δ 3.7×10-16 (13 digits) ↗ | ||||
| Cross-correlation | Two rows give an insufficient-data outcome | max lag = 1 | ✓ exact ↗ | ||||
| Dynamic regression | Dynamic regression | arima order = 1, 0, 0; deterministic term = constant; features = column x, kind level; future scenarios = column x, values 4, 5, 6 | ✓ Δ 2.5×10-8 (7 digits) ↗ | ||||
| Fit ARMA or ARIMA | Forecast | arima order = 1, 0, 0; deterministic term = constant; horizon = 3 | ✓ Δ 2.2×10-6 (6 digits) ↗ | ||||
| Fit ARMA or ARIMA | Forecast | arima order = 1, 1, 0; deterministic term = none; horizon = 3 | ✓ Δ 1.5×10-9 (7 digits) ↗ | ||||
| Forecast | Forecast | horizon = 3 | ✓ Δ 7.5×10-15 (15+ digits) ↗ | ||||
| Forecast | Forecast | horizon = 3; season length = 4 | ✓ Δ 4.0×10-15 (15+ digits) ↗ | ||||
| GARCH models | Advanced | distribution = normal; garch p = 1; garch q = 1; horizon = 1; kind = garch; mean = constant | ✓ Δ 1.1×10-8 (7 digits) ↗ | ||||
| Seasonal decomposition and adjustment | A random walk is a differencing candidate | task = stationarity | ✓ exact ↗ | ||||
| Seasonal decomposition and adjustment | Advanced | break deterministic = both; kind = zivot_andrews | ✓ Δ 5.9×10-13 (13 digits) ↗ | ||||
| Seasonal decomposition and adjustment | Advanced | cointegration rank = 0; deterministic = constant; horizon = 2; kind = var_vecm; lag order = 1 | ✓ Δ 4.3×10-17 (15+ digits) ↗ | ||||
| Seasonal decomposition and adjustment | Advanced | cointegration rank = 1; deterministic = constant; horizon = 2; kind = var_vecm; lag order = 2 | ✓ Δ 4.1×10-11 (12 digits) ↗ | ||||
| Seasonal decomposition and adjustment | Advanced | cointegration rank = 2; deterministic = constant; horizon = 2; kind = var_vecm; lag order = 1 | ✓ Δ 1.8×10-15 (13 digits) ↗ | ||||
| Seasonal decomposition and adjustment | Advanced | distribution = normal; garch p = 1; garch q = 1; horizon = 1; kind = garch; mean = constant | ✓ Δ 1.1×10-8 (7 digits) ↗ | ||||
| Seasonal decomposition and adjustment | Biased sample ACF and lag-one PACF | maximum lag = 5; task = correlations | ✓ Δ 3.4×10-16 (15+ digits) ↗ | ||||
| Seasonal decomposition and adjustment | Dynamic regression | arima order = 1, 0, 0; deterministic term = constant; features = column x, kind level; future scenarios = column x, values 4, 5, 6 | ✓ Δ 2.5×10-8 (7 digits) ↗ | ||||
| Seasonal decomposition and adjustment | First ordinary difference of the guided workflow | difference order = 2; maximum lag = 5; task = difference | ✓ Δ 1.9×10-18 (15+ digits) ↗ | ||||
| Seasonal decomposition and adjustment | Forecast | arima order = 1, 0, 0; deterministic term = constant; horizon = 3 | ✓ Δ 2.2×10-6 (6 digits) ↗ | ||||
| Seasonal decomposition and adjustment | Forecast | arima order = 1, 1, 0; deterministic term = none; horizon = 3 | ✓ Δ 1.5×10-9 (7 digits) ↗ | ||||
| Seasonal decomposition and adjustment | Forecast | horizon = 3 | ✓ Δ 7.5×10-15 (15+ digits) ↗ | ||||
| Seasonal decomposition and adjustment | Forecast | horizon = 3; season length = 4 | ✓ Δ 4.0×10-15 (15+ digits) ↗ | ||||
| Seasonal decomposition and adjustment | Guided selection of the first stationary difference order | difference order = 2; maximum lag = 5; task = difference | ✓ Δ 5.3×10-15 (14 digits) ↗ | ||||
| Seasonal decomposition and adjustment | NIST Lew: acf | maximum lag = 1; task = correlations | ✓ Δ 4.4×10-16 (14 digits) ↗ | ||||
| Seasonal decomposition and adjustment | NIST Lottery: acf | maximum lag = 1; task = correlations | ✓ Δ 1.2×10-16 (15+ digits) ↗ | ||||
| Seasonal decomposition and adjustment | NIST Mavro: acf | maximum lag = 1; task = correlations | ✓ Δ 1.7×10-14 (13 digits) ↗ | ||||
| Seasonal decomposition and adjustment | NIST Michelso: acf | maximum lag = 1; task = correlations | ✓ Δ 2.0×10-14 (13 digits) ↗ | ||||
| Seasonal decomposition and adjustment | NIST NumAcc2: acf | maximum lag = 1; task = correlations | ✓ Δ 1.1×10-16 (15+ digits) ↗ | ||||
| Seasonal decomposition and adjustment | NIST NumAcc3: acf | maximum lag = 1; task = correlations | ✓ Δ 8.9×10-19 (15+ digits) ↗ | ||||
| Seasonal decomposition and adjustment | NIST NumAcc4: acf | maximum lag = 1; task = correlations | ✓ Δ 2.2×10-16 (15+ digits) ↗ | ||||
| Seasonal decomposition and adjustment | NIST PiDigits: acf | maximum lag = 1; task = correlations | ✓ Δ 1.6×10-18 (15+ digits) ↗ | ||||
| Seasonal decomposition and adjustment | No eligible differencing stage | difference order = 2; maximum lag = 5; task = difference | ✓ Δ 3.9×10-12 (11 digits) ↗ | ||||
| Seasonal decomposition and adjustment | Original series selected: no differencing recommended | difference order = 2; maximum lag = 5; task = stationarity | ✓ Δ 1.5×10-14 (14 digits) ↗ | ||||
| Seasonal decomposition and adjustment | Study | forecast = response column rw, model naive, horizon 3; validation = initial window 40, horizon 3, final evaluation 6 | ✓ Δ 3.1×10-15 (14 digits) ↗ | ||||
| Seasonal decomposition and adjustment | White noise is stationary | task = stationarity | ✓ exact ↗ | ||||
| Stationarity and differencing | A random walk is a differencing candidate | task = stationarity | ✓ exact ↗ | ||||
| Stationarity and differencing | First ordinary difference of the guided workflow | difference order = 2; maximum lag = 5; task = difference | ✓ Δ 1.9×10-18 (15+ digits) ↗ | ||||
| Stationarity and differencing | Guided selection of the first stationary difference order | difference order = 2; maximum lag = 5; task = difference | ✓ Δ 5.3×10-15 (14 digits) ↗ | ||||
| Stationarity and differencing | No eligible differencing stage | difference order = 2; maximum lag = 5; task = difference | ✓ Δ 3.9×10-12 (11 digits) ↗ | ||||
| Stationarity and differencing | Original series selected: no differencing recommended | difference order = 2; maximum lag = 5; task = stationarity | ✓ Δ 1.5×10-14 (14 digits) ↗ | ||||
| Stationarity and differencing | White noise is stationary | task = stationarity | ✓ exact ↗ | ||||
| Trend analysis | Exponential | horizon = 3 | ✓ Δ 8.5×10-14 (13 digits) ↗ | ||||
| Trend analysis | Exponential NLS | horizon = 0 | ✓ Δ 1.0×10-9 (7 digits) ↗ | ||||
| Trend analysis | Linear | horizon = 1 | ✓ Δ 1.6×10-14 (14 digits) ↗ | ||||
| Trend analysis | Linear | horizon = 2 | ✓ Δ 1.8×10-14 (14 digits) ↗ | ||||
| Trend analysis | Quadratic | horizon = 0 | ✓ Δ 9.2×10-14 (14 digits) ↗ | ||||
| Trend analysis | Scurve | horizon = 1 | ✓ Δ 6.1×10-8 (7 digits) ↗ | ||||
| Unit-root test with a break | Advanced | break deterministic = both; kind = zivot_andrews | ✓ Δ 5.9×10-13 (13 digits) ↗ | ||||
| VAR and VECM | Advanced | cointegration rank = 0; deterministic = constant; horizon = 2; kind = var_vecm; lag order = 1 | ✓ Δ 4.3×10-17 (15+ digits) ↗ | ||||
| VAR and VECM | Advanced | cointegration rank = 1; deterministic = constant; horizon = 2; kind = var_vecm; lag order = 2 | ✓ Δ 4.1×10-11 (12 digits) ↗ | ||||
| VAR and VECM | Advanced | cointegration rank = 2; deterministic = constant; horizon = 2; kind = var_vecm; lag order = 1 | ✓ Δ 1.8×10-15 (13 digits) ↗ |
Quality
| Window | Analysis | Settings compared | NIST | R | Analytical | Published example | Independent reviewer |
|---|---|---|---|---|---|---|---|
| Acceptance sampling by variables | Known sigma one-sided variables plan | aql = 0.02; consumer risk = 0.1; ltpd = 0.1; max sample size = 500; oc points = 11; producer risk = 0.05; sigma = 2.25; sigma status = known; spec limit = 87.5; spec side = upper | ✓ Δ 2.2×10-16 (14 digits) ↗ | ||||
| Acceptance sampling by variables | Unknown sigma one-sided variables plan | aql = 0.02; consumer risk = 0.1; ltpd = 0.1; max sample size = 500; oc points = 11; producer risk = 0.05; sigma status = unknown; spec limit = 12.5; spec side = lower | ✓ exact ↗ | ||||
| Apply specifications | Case-sensitive matching leaves 'length' unmatched | case insensitive = no | ✓ exact ↗ | ||||
| Apply specifications | Default normalization matches through whitespace and case | default settings | ✓ Δ 3.6×10-16 (15+ digits) ↗ | ||||
| Apply specifications | Keeping whitespace leaves ' Diameter A' unmatched | ignore whitespace = no | ✓ exact ↗ | ||||
| Apply specifications | Matching a transposed sheet | transposed = yes | ✓ exact ↗ | ||||
| Apply specifications | Neither limit role assigned is refused | default settings | ✓ ↗ | ||||
| Apply specifications | Transposing a sheet laid out across columns | transposed = yes | ✓ exact ↗ | ||||
| Apply specifications | Without transposing the sheet is unchanged | transposed = no | ✓ exact ↗ | ||||
| Manufacturing decision tools | An AQL at or above the LTPD is refused | aql = 0.05; ltpd = 0.05 | ✓ ↗ | ||||
| Manufacturing decision tools | Binomial single-sampling plan: AQL 0.01, LTPD 0.06 | aql = 0.01; consumer risk = 0.1; ltpd = 0.06; producer risk = 0.05 | ✓ Δ 5.3×10-16 (14 digits) ↗ | ||||
| Manufacturing decision tools | Binomial single-sampling plan: AQL 0.02, LTPD 0.08 | aql = 0.02; consumer risk = 0.05; ltpd = 0.08; producer risk = 0.1 | ✓ Δ 3.3×10-16 (14 digits) ↗ | ||||
| Manufacturing decision tools | Distribution free | confidence = 0.9; content = 0.9; sided = one_upper | ✓ ↗ | ||||
| Manufacturing decision tools | NIST (52,3) binomial operating-characteristic example | accept number = 3; sample size = 52 | ✓ Δ 1.1×10-16 (15+ digits) ↗ | ||||
| Manufacturing decision tools | Normal | confidence = 0.95; content = 0.95; sided = two_sided | ✓ Δ 5.3×10-15 (14 digits) ↗ | ||||
| Manufacturing decision tools | Normal | confidence = 0.95; content = 0.99; sided = one_upper | ✓ Δ 9.5×10-12 (12 digits) ↗ | ||||
| Manufacturing decision tools | Normal | confidence = 0.99; content = 0.95; sided = two_sided | ✓ Δ 1.6×10-15 (15+ digits) ↗ | ||||
| Manufacturing decision tools | Right-censored Weibull life model | failure value = failed | ✓ Δ 3.9×10-5 (6 digits) ↗ |
Quality › Capability
| Window | Analysis | Settings compared | NIST | R | Analytical | Published example | Independent reviewer |
|---|---|---|---|---|---|---|---|
| Assess capability | Binomial | confidence level = 0.9; family = binomial | ✓ Δ 2.9×10-20 (15+ digits) ↗ | ||||
| Assess capability | Binomial | family = binomial | ✓ Δ 3.9×10-13 (15+ digits) ↗ | ||||
| Assess capability | Normal | limits = value 5.49, 5.79; study = subgroup mode constant, subgroup size 5, within method pooled, require stability no, require msa no | ✓ Δ 7.1×10-15 (14 digits) ↗ | ||||
| Assess capability | Normal | limits = value 5.49, 5.79; study = subgroup mode constant, subgroup size 5, within method range, require stability no, require msa no | ✓ Δ 6.9×10-15 (14 digits) ↗ | ||||
| Assess capability | Normal | limits = value 5.49, 5.79; study = subgroup mode constant, subgroup size 5, within method stddev, require stability no, require msa no | ✓ Δ 7.1×10-15 (14 digits) ↗ | ||||
| Assess capability | Normal | limits = value 5.49, 5.79; study = subgroup mode individuals, within method moving_range, require stability no, require msa no | ✓ Δ 6.9×10-15 (14 digits) ↗ | ||||
| Assess capability | Normal | limits = value 8.7, 11.3; study = subgroup mode individuals, within method moving_range, require stability no, require msa no | ✓ Δ 2.7×10-15 (14 digits) ↗ | ||||
| Assess capability | Poisson | family = poisson | ✓ Δ 2.6×10-15 (15+ digits) ↗ | ||||
| Assess capability | SB | a = 2.373; b = 1.959; family = SB; loc = 0.295; scale = 1.203 | ✓ Δ 2.6×10-17 (15+ digits) ↗ | ||||
| Assess capability | SU | a = 1.402; b = 2.333; family = SU; loc = 15.516; scale = 1.585 | ✓ Δ 2.7×10-16 (15+ digits) ↗ | ||||
| Capability of several characteristics | Normal | confidence level = 0.95; lsls = 8.8, 1.75; targets = 10, ; usls = 11.2, 2.25 | ✓ Δ 7.3×10-11 (11 digits) ↗ | ||||
| Capability of several characteristics | Normal | confidence level = 0.99; lsls = , 1.75; usls = 11.2, | ✓ Δ 7.2×10-11 (11 digits) ↗ | ||||
| Capability sixpack | Normal | confidence level = 0.95; lsl = 8.8; target = 10; usl = 11.2 | ✓ Δ 4.7×10-11 (11 digits) ↗ | ||||
| Capability sixpack | Normal | confidence level = 0.95; usl = 2.25 | ✓ Δ 5.6×10-11 (13 digits) ↗ | ||||
| Capability sixpack | Normal | confidence level = 0.9; lsl = 8.8; target = 10; usl = 11.2 | ✓ Δ 4.7×10-11 (11 digits) ↗ | ||||
| Compare capability of populations | Normal | confidence level = 0.95; lsl = 8.8; split kind = group; target = 10; usl = 11.2 | ✓ Δ 9.2×10-11 (9 digits) ↗ | ||||
| Compare capability of populations | Normal | confidence level = 0.95; lsl = 8.8; split kind = point; split value = 21; usl = 11.2 | ✓ Δ 9.2×10-11 (9 digits) ↗ | ||||
| Within/between batch capability | A zero between-batch component makes within and overall coincide | lower limit = 46; upper limit = 54 | ✓ Δ 1.1×10-16 (15+ digits) ↗ | ||||
| Within/between batch capability | No specification limit is refused | default settings | ✓ ↗ | ||||
| Within/between batch capability | Upper limit only at a 90% level | confidence level = 0.9; upper limit = 54 | ✓ Δ 3.1×10-15 (14 digits) ↗ | ||||
| Within/between batch capability | Within and overall capability of balanced batches | lower limit = 46; upper limit = 54 | ✓ Δ 2.1×10-14 (14 digits) ↗ |
Quality › Measurement systems
| Window | Analysis | Settings compared | NIST | R | Analytical | Published example | Independent reviewer |
|---|---|---|---|---|---|---|---|
| Attribute agreement | Repeated columns are refused | appraiser = item; part = item; rating = rating | ✓ ↗ | ||||
| Attribute agreement | Three appraisers, two trials and a known standard | appraiser = appraiser; part = item; rating = rating; study standard supplied; trial = trial | ✓ Δ 1.5×10-14 (15+ digits) ↗ | ||||
| Attribute agreement | Two appraisers use Cohen kappa between them | appraiser = appraiser; part = item; rating = rating; trial = trial | ✓ Δ 1.9×10-16 (15+ digits) ↗ | ||||
| Attribute agreement | Weighted Cohen kappa: ordinal linear | appraiser = appraiser; part = item; rating = rating; scale = ordinal_linear | ✓ Δ 1.1×10-16 (15+ digits) ↗ | ||||
| Attribute agreement | Weighted Cohen kappa: ordinal quadratic | appraiser = appraiser; part = item; rating = rating; scale = ordinal_quadratic | ✓ Δ 5.5×10-16 (14 digits) ↗ | ||||
| Attribute gage response curve | 10/90 transition points at 90% confidence | confidence level = 0.9; lower percentile = 0.1; threshold = 10; upper percentile = 0.9 | ✓ Δ 2.1×10-9 (7 digits) ↗ | ||||
| Attribute gage response curve | Modelling the fail event reverses the curve | modeled event = fail; threshold = 10 | ✓ Δ 2.5×10-9 (7 digits) ↗ | ||||
| Attribute gage response curve | Probit gage response with Fieller intervals | threshold = 10 | ✓ Δ 1.6×10-7 (5 digits) ↗ | ||||
| Attribute gage response curve | Separated outcomes have no finite estimate | threshold = 2.5 | ✓ ↗ | ||||
| Extended gage studies | Fewer than ten measurements are refused | reference = 10; tolerance = 0.6 | ✓ ↗ | ||||
| Extended gage studies | Gage linearity and bias | tolerance = 4 | ✓ Δ 2.2×10-15 (13 digits) ↗ | ||||
| Extended gage studies | Gage stability sorted by an order column | reference = 5.1 | ✓ Δ 8.9×10-16 (13 digits) ↗ | ||||
| Extended gage studies | Nested destructive Gage R&R | default settings | ✓ Δ 2.8×10-14 (14 digits) ↗ | ||||
| Extended gage studies | Type-1 gage Cg and Cgk | reference = 10; tolerance = 0.6 | ✓ Δ 4.5×10-14 (12 digits) ↗ | ||||
| Gage R repeatability screening | ANOVA | max rows = 1000000; process sd = None; study standard supplied; total variation = option study, process spread None, target pp None, tolerance 8, intended use process | not assessed | ||||
| Gage R repeatability screening | Average range | max rows = 1000000; process sd = None; study standard supplied; total variation = option study, process spread None, target pp None, tolerance None, intended use process | not assessed | ||||
| Gage R repeatability screening | Chart worksheet | max rows = 1000000; process sd = None; study standard supplied; total variation = option study, process spread None, target pp None, tolerance None, intended use process | not assessed | ||||
| Gage R repeatability screening | Pooled SD | max rows = 1000000; process sd = None; study standard supplied; total variation = option study, process spread None, target pp None, tolerance None, intended use process | not assessed | ||||
| Gage R repeatability screening | Range | max rows = 1000000; process sd = 0.0777; study standard supplied; total variation = option study, process spread None, target pp None, tolerance None, intended use process | not assessed | ||||
| Gage R&R | A missing value unbalances the design and is refused | default settings | ✓ ↗ | ||||
| Gage R&R | AIAG MSA-4 Appendix B impact of GRR on Cp (corrected tolerance formula) | measurement sd = 0.6; observed cp = 2; observed sd = 1; tolerance = 12 | ✓ exact ↗ | ||||
| Gage R&R | ANOVA | max rows = 1000000; process sd = None; study standard supplied; total variation = option study, process spread None, target pp None, tolerance 8, intended use process | not assessed | ||||
| Gage R&R | Average range | max rows = 1000000; process sd = None; study standard supplied; total variation = option study, process spread None, target pp None, tolerance None, intended use process | not assessed | ||||
| Gage R&R | Chart worksheet | max rows = 1000000; process sd = None; study standard supplied; total variation = option study, process spread None, target pp None, tolerance None, intended use process | not assessed | ||||
| Gage R&R | Crossed Gage R&R with a pooled interaction and a tolerance | tolerance = 12 | ✓ Δ 1.3×10-13 (13 digits) ↗ | ||||
| Gage R&R | Crossed Gage R&R with a retained interaction | default settings | ✓ Δ 8.2×10-14 (13 digits) ↗ | ||||
| Gage R&R | Interaction alpha 0.99 and a 5.15-sigma study variation | interaction alpha = 0.99; study var multiplier = 5.15 | ✓ Δ 1.3×10-13 (13 digits) ↗ | ||||
| Gage R&R | One trial per cell is refused | default settings | ✓ ↗ | ||||
| Gage R&R | Pooled SD | max rows = 1000000; process sd = None; study standard supplied; total variation = option study, process spread None, target pp None, tolerance None, intended use process | not assessed | ||||
| Gage R&R | Range | max rows = 1000000; process sd = 0.0777; study standard supplied; total variation = option study, process spread None, target pp None, tolerance None, intended use process | not assessed | ||||
| Gage R&R | Simultaneous full-model repeatability interval | default settings | ✓ Δ 1.2×10-15 (14 digits) ↗ | ||||
| Gage run chart | Gage run chart means and trial layout on a hand-checked crossed study | default settings | ✓ Δ 3.6×10-16 (15+ digits) ↗ | ||||
| Multifactor gage R&R | A part-by-site interaction is confounded when sites nest in parts | interactions = part_site; structure = site_nested_in_part | ✓ ↗ | ||||
| Multifactor gage R&R | Classic crossed structure reproduces the crossed engine | default settings | ✓ Δ 5.3×10-15 (14 digits) ↗ | ||||
| Multifactor gage R&R | Fully crossed part, operator and site | structure = fully_crossed | ✓ Δ 2.2×10-7 (6 digits) ↗ | ||||
| Multifactor gage R&R | Site nested in part counts toward part-to-part | structure = site_nested_in_part | ✓ Δ 1.1×10-7 (6 digits) ↗ |
Quality › Reliability engineering
| Window | Analysis | Settings compared | NIST | R | Analytical | Published example | Independent reviewer |
|---|---|---|---|---|---|---|---|
| Accelerated life analysis | Accelerated life analysis | high stress = 104000; mode = accelerated; stress type = linear; stress unit = native; use stress = 102500 | ✓ Δ 8.4×10-8 (13 digits) ↗ | ||||
| Accelerated life analysis | Accelerated life analysis | high stress = 60; mode = accelerated; stress type = linear; stress unit = native; use stress = 40 | ✓ exact ↗ | ||||
| Accelerated life analysis | Parametric survival | high stress = 80; mode = accelerated; stress type = linear; stress unit = native; use stress = 50 | ✓ Δ 2.8×10-12 (12 digits) ↗ | ||||
| Accelerated life analysis | Survival corrected option | confidence level = 0.9; high stress = 80; mode = accelerated; stress type = inverse_power; stress unit = native; use stress = 50 | ✓ Δ 1.0×10-11 (12 digits) ↗ | ||||
| Accelerated life analysis | Survival option | confidence level = 0.9; high stress = 80; mode = accelerated; stress type = arrhenius; stress unit = celsius; use stress = 25 | ✓ Δ 2.3×10-10 (10 digits) ↗ | ||||
| Accelerated life analysis | Survival option | confidence level = 0.9; high stress = 80; mode = accelerated; stress type = inverse_power; stress unit = native; use stress = 50 | ✓ Δ 7.2×10-12 (12 digits) ↗ | ||||
| Accelerated life analysis | Survival population | high stress = 80; mode = accelerated; stress type = linear; stress unit = native; use stress = 50 | ✓ exact ↗ | ||||
| Censored lifetime distributions | Censored lifetime distributions | default settings | ✓ ↗ | ||||
| Censored lifetime distributions | Censored lifetime distributions | mode = families | ✓ Δ 1.1×10-11 (15+ digits) ↗ | ||||
| Censored lifetime distributions | Censored lifetime distributions | mode = unsupported | ✓ ↗ | ||||
| Censored lifetime distributions | Parametric survival | mode = families | ✓ Δ 2.5×10-16 (15+ digits) ↗ | ||||
| Censored lifetime distributions | Survival population | mode = families | ✓ Δ 1.3×10-16 (15+ digits) ↗ | ||||
| Degradation-based lifetime | Degradation-based lifetime: inverse-kelvin temperature acceleration to a use temperature | baseline = 0; confidence level = 0.95; direction = increasing; dropout ignorable declared = yes; lifetime probabilities = 0.1, 0.5, 0.9; mode = repeated; reliability times = 10, 15, 20; threshold = 25; time unit = hours; use temperature = 348 | not assessed | ||||
| Degradation-based lifetime | Degradation-based lifetime: repeated measurements, lognormal rates, no temperature axis | baseline = 0; confidence level = 0.95; direction = increasing; dropout ignorable declared = yes; lifetime probabilities = 0.1, 0.5, 0.9; mode = repeated; reliability times = 10, 15, 20; threshold = 25; time unit = hours; use temperature = None | not assessed | ||||
| Distribution identification plot | Distribution identification of complete data across the seven families | confidence level = 0.95; end = time; families = weibull, lognormal, exponential, loglogistic, logistic, normal, sev; frequency = freq; layout = arbitrary; start = time; threshold = 0 | ✓ Δ 7.7×10-6 (6 digits) ↗ | ||||
| Distribution identification plot | Distribution identification of right-censored data with the restricted-domain AD | confidence level = 0.95; families = weibull, lognormal, exponential, loglogistic, logistic, normal, sev; frequency = freq; layout = right_censored; start = time; status = status; threshold = 0 | ✓ Δ 1.8×10-5 (6 digits) ↗ | ||||
| Mixed-censoring life analysis | Mixed-censoring life analysis | mode = interval | ✓ Δ 3.1×10-6 (10 digits) ↗ | ||||
| Mixed-censoring life analysis | Parametric survival | mode = interval | ✓ Δ 6.5×10-8 (7 digits) ↗ | ||||
| Mixed-censoring life analysis | Survival population | mode = interval | ✓ exact ↗ | ||||
| Nonparametric life estimation | Kaplan-Meier life estimation with a tied failure and censoring at 90% | confidence level = 0.9; frequency = freq; layout = right_censored; start = time; status = status | ✓ Δ 1.4×10-15 (15+ digits) ↗ | ||||
| Nonparametric life estimation | Kaplan-Meier life estimation with frequencies at 95% | confidence level = 0.95; frequency = freq; layout = right_censored; start = time; status = status | ✓ Δ 1.4×10-15 (14 digits) ↗ | ||||
| Nonparametric life estimation | Turnbull nonparametric life estimation from interval data | confidence level = 0.95; end = end; frequency = freq; layout = arbitrary; start = start | ✓ Δ 1.5×10-15 (14 digits) ↗ | ||||
| Parametric life distribution | Exponential | confidence level = 0.95; family = exponential; frequency = freq; layout = right_censored; percents = 1, 5, 50; start = start; status = status; threshold = 0 | ✓ Δ 5.0×10-6 (6 digits) ↗ | ||||
| Parametric life distribution | Lognormal | confidence level = 0.9; end = end; family = lognormal; frequency = freq; layout = arbitrary; percents = 5, 50; start = start; threshold = 5 | ✓ Δ 1.4×10-7 (7 digits) ↗ | ||||
| Parametric life distribution | SEV | confidence level = 0.95; end = end; family = sev; frequency = freq; layout = arbitrary; percents = 1, 10, 50; start = start; threshold = 0 | ✓ Δ 1.5×10-5 (6 digits) ↗ | ||||
| Parametric life distribution | Weibull | confidence level = 0.95; end = end; family = weibull; frequency = freq; layout = arbitrary; percents = 1, 5, 10, 50; start = start; threshold = 0 | ✓ Δ 2.2×10-6 (6 digits) ↗ | ||||
| Prepare warranty data | Derived warranty censoring table with interval records and right-censored survivors | last period = incomplete; period unit = month; period width = 1; return axis = calendar; returns = r1, r2, r3, r4, r5, r6, r7; shipment label = label; shipped = shipped | ✓ exact ↗ | ||||
| Prepare warranty data | Warranty triangle conversion on the age axis with the final period complete | last period = complete; period unit = month; period width = 1; return axis = age; returns = r1, r2, r3, r4, r5; shipment label = label; shipped = shipped | ✓ exact ↗ | ||||
| Prepare warranty data | Warranty triangle conversion on the calendar axis with the final period incomplete | last period = incomplete; period unit = month; period width = 1; return axis = calendar; returns = r1, r2, r3, r4, r5, r6, r7; shipment label = label; shipped = shipped | ✓ exact ↗ | ||||
| Regression with life data | Lognormal | confidence level = 0.95; end = end; family = lognormal; frequency = freq; layout = arbitrary; percents = 10, 50; prediction rows = temp3=low, temp3=high; start = start; temperature unit = celsius; threshold = 0; transform = none | ✓ Δ 1.6×10-6 (6 digits) ↗ | ||||
| Regression with life data | SEV | confidence level = 0.9; end = end; family = sev; frequency = freq; layout = arbitrary; percents = 10, 90; prediction rows = temp_c=45, temp_c=75; start = start; temperature unit = celsius; threshold = 0; transform = arrhenius | ✓ Δ 7.3×10-3 (5 digits) ↗ | ||||
| Regression with life data | Weibull | confidence level = 0.95; end = end; family = weibull; frequency = freq; layout = arbitrary; percents = 10, 50; prediction rows = stress=80, stress=150; start = start; temperature unit = celsius; threshold = 0; transform = none | ✓ Δ 1.4×10-6 (7 digits) ↗ | ||||
| Repairable systems | Repairable-system MCF with a constant-rate HPP overlay | confidence level = 0.95; evaluation ages = 3, 6, 12; events tab = events; stored fits supplied; time unit = months; windows tab = windows | ✓ Δ 2.3×10-15 (15+ digits) ↗ | ||||
| Repairable systems | Repairable-system MCF with a power-law NHPP fit and forecast | confidence level = 0.9; evaluation ages = 4, 8; events tab = events; forecast horizon = 2; stored fits supplied; time unit = months; windows tab = windows | ✓ Δ 5.8×10-8 (7 digits) ↗ | ||||
| Stability study | Stability study | default settings | ✓ ↗ | ||||
| Stability study | Stability study | lsl = 1000 | ✓ exact ↗ | ||||
| Stability study | Stability study | lsl = 100; usl = 95 | ✓ ↗ | ||||
| Stability study | Stability study | lsl = 95 | ✓ Δ 1.3×10-13 (11 digits) ↗ | ||||
| Stability study | Survival | lsl = 95; model type = pooled | ✓ Δ 3.3×10-14 (14 digits) ↗ | ||||
| Stability study | Survival option | confidence level = 0.9; lsl = 95; model type = separate_intercepts_pooled_slope | ✓ Δ 2.3×10-14 (13 digits) ↗ | ||||
| Stability study | Survival option | lsl = 95; model type = separate_intercepts_separate_slopes | ✓ Δ 3.4×10-14 (13 digits) ↗ | ||||
| Stability study | Survival population | lsl = 95 | ✓ Δ 6.7×10-16 (14 digits) ↗ | ||||
| Warranty prediction | Lognormal | confidence level = 0.9; end = end; family = lognormal; frequency = freq; future shipments = 400@2.5; horizon = 8; period unit = month; period width = 1; source = censoring_table; start = start | ✓ Δ 2.5×10-7 (7 digits) ↗ | ||||
| Warranty prediction | Weibull | confidence level = 0.95; family = weibull; future shipments = 500@1.5, 300@6; horizon = 12; last period = incomplete; period unit = month; period width = 1; return axis = calendar; returns = r1, r2, r3, r4, r5, r6, r7; shipped = shipped; source = triangle; unit cost = 3.2; warranty limit = 24 | ✓ Δ 1.3×10-5 (7 digits) ↗ | ||||
| Weibull accelerated failure time | Parametric survival | prediction stresses = 50 | ✓ Δ 1.4×10-9 (9 digits) ↗ | ||||
| Weibull accelerated failure time | Survival population | prediction stresses = 50 | ✓ exact ↗ | ||||
| Weibull accelerated failure time | Weibull accelerated failure time | default settings | ✓ exact ↗ | ✓ ↗ | |||
| Weibull accelerated failure time | Weibull accelerated failure time | max rows = 0 | ✓ ↗ | ||||
| Weibull accelerated failure time | Weibull accelerated failure time | prediction stresses = 102500 | ✓ Δ 2.0×10-7 (10 digits) ↗ |
Quality › Statistical process control
| Window | Analysis | Settings compared | NIST | R | Analytical | Published example | Independent reviewer |
|---|---|---|---|---|---|---|---|
| Between/within I-MR-R/S chart | Between/within I-MR-R chart by subgroup column | dispersion = range | ✓ Δ 1.1×10-14 (14 digits) ↗ | ||||
| Between/within I-MR-R/S chart | Between/within I-MR-S chart | dispersion = stddev | ✓ Δ 1.1×10-14 (14 digits) ↗ | ||||
| Between/within I-MR-R/S chart | Between/within chart with consecutive subgroups of five and two stages | dispersion = range | ✓ Δ 1.2×10-14 (14 digits) ↗ | ||||
| Between/within I-MR-R/S chart | Between/within chart with unequal lot sizes and an excluded row | dispersion = range | ✓ Δ 1.5×10-8 (7 digits) ↗ | ||||
| Control charts | A non-positive sigma is refused | sigma = 0 | ✓ ↗ | ||||
| Control charts | A subgroup size of 26 is refused | default settings | ✓ ↗ | ||||
| Control charts | An unknown run rule is refused | run rules = rule_9 | ✓ ↗ | ||||
| Control charts | Approved limits for the wrong chart are refused | approved = chart xbar, center 21, lower 18, upper 24 | ✓ ↗ | ||||
| Control charts | Benneyan geometric support translated to HypoNum g chart | baseline = column phase, op eq, value reference; chart = g | ✓ Δ 1.6×10-16 (15+ digits) ↗ | ||||
| Control charts | CUSUM | cusum h = 1; cusum k = 0.5; sigma = 1; target = 0 | ✓ exact ↗ | ||||
| Control charts | CUSUM with a supplied target and sigma | cusum h = 4; cusum k = 0.25; sigma = 1.1; target = 10 | ✓ Δ 9.2×10-16 (15+ digits) ↗ | ||||
| Control charts | CUSUM with target and sigma from the data | default settings | ✓ Δ 2.6×10-15 (15+ digits) ↗ | ||||
| Control charts | Defectives above the sample size are refused | chart = p | ✓ ↗ | ||||
| Control charts | EWMA | default settings | ✓ Δ 4.6×10-16 (15+ digits) ↗ | ||||
| Control charts | EWMA | ewma l = 2.7; ewma lambda = 0.1; sigma = 1; target = 10 | ✓ Δ 4.7×10-16 (15+ digits) ↗ | ||||
| Control charts | EWMA | ewma l = 2.7; ewma lambda = 0.1; target = 10 | ✓ Δ 2.1×10-16 (15+ digits) ↗ | ||||
| Control charts | EWMA | ewma l = 3; ewma lambda = 0.25; sigma = 1; target = 0 | ✓ Δ 3.7×10-17 (15+ digits) ↗ | ||||
| Control charts | EWMA | ewma lambda = 1.5 | ✓ ↗ | ||||
| Control charts | Fixed approved limits replace the calculated ones | approved = chart individuals, center 21.5, lower 18.4, upper 24.6, chart moving_range, center 1, lower 0, upper 3.3 | ✓ Δ 4.2×10-16 (15+ digits) ↗ | ||||
| Control charts | Grouping column with a median size above 10 uses X-bar/S | default settings | ✓ Δ 4.3×10-16 (15+ digits) ↗ | ||||
| Control charts | Grouping column with varying sizes (X-bar/R, point-specific limits) | default settings | ✓ Δ 3.3×10-14 (14 digits) ↗ | ||||
| Control charts | Individuals and moving range with the default rules | default settings | ✓ Δ 4.6×10-16 (15+ digits) ↗ | ||||
| Control charts | Individuals chart at a 1e7 offset | default settings | ✓ Δ 1.8×10-9 (10 digits) ↗ | ||||
| Control charts | Individuals chart with all eight rules | run rules = rule_2, rule_3, rule_4, rule_5, rule_6, rule_7, rule_8 | ✓ exact ↗ | ||||
| Control charts | Laney p' chart | chart = laney_p | ✓ Δ 1.8×10-19 (15+ digits) ↗ | ||||
| Control charts | Laney u' chart | chart = laney_u | ✓ Δ 1.8×10-15 (15+ digits) ↗ | ||||
| Control charts | Missing and excluded rows are omitted before the moving ranges | default settings | ✓ Δ 7.4×10-15 (15+ digits) ↗ | ||||
| Control charts | Missing counts are omitted and excluded lots removed | chart = p | ✓ Δ 2.9×10-19 (15+ digits) ↗ | ||||
| Control charts | NIST R-chart D4(5): printed table versus full precision | default settings | ✓ Δ 1.8×10-15 (15+ digits) ↗ | ||||
| Control charts | NIST wafer c chart with strict on-limit decision | chart = c | ✓ exact ↗ | ||||
| Control charts | Np with a varying size column is refused | chart = np | ✓ ↗ | ||||
| Control charts | Phase I baseline freezes the limits from the first 40 points | baseline = column phase, op le, value 1 | ✓ Δ 4.9×10-16 (15+ digits) ↗ | ||||
| Control charts | Spec limits are overlays only | lower spec = 40; upper spec = 60 | ✓ exact ↗ | ||||
| Control charts | Two process stages recalculated independently | stages = name Before, start label P01, end label P30, name After, start label P31 | ✓ exact ↗ | ||||
| Control charts | X-bar and R with constant subgroups of 5 | default settings | ✓ Δ 2.9×10-14 (14 digits) ↗ | ||||
| Control charts | X-bar and R with the smallest subgroups of 2 | default settings | ✓ Δ 4.5×10-17 (15+ digits) ↗ | ||||
| Control charts | X-bar and S with constant subgroups of 12 | default settings | ✓ Δ 2.5×10-15 (13 digits) ↗ | ||||
| Control charts | c chart | chart = c | ✓ Δ 1.3×10-16 (15+ digits) ↗ | ||||
| Control charts | g chart plots the counts between events | chart = g | ✓ exact ↗ | ||||
| Control charts | np chart with a constant size of 100 | chart = np; sample size = 100 | ✓ Δ 1.3×10-17 (15+ digits) ↗ | ||||
| Control charts | p chart with a Phase I baseline of 20 lots | baseline = column phase, op le, value 1; chart = p | ✓ Δ 3.8×10-19 (15+ digits) ↗ | ||||
| Control charts | p chart with varying inspected counts | chart = p | ✓ Δ 1.8×10-19 (15+ digits) ↗ | ||||
| Control charts | u chart with an area column | chart = u | ✓ Δ 1.8×10-15 (15+ digits) ↗ | ||||
| Individual Hotelling T² chart | Excluded and incomplete rows leave the baseline and the monitoring | alpha = 0.0027; reference value = ref | ✓ Δ 1.3×10-14 (14 digits) ↗ | ||||
| Individual Hotelling T² chart | Individual Phase II T-squared at alpha 0.0027 | alpha = 0.0027; reference value = ref | ✓ Δ 1.0×10-13 (14 digits) ↗ | ||||
| Individual Hotelling T² chart | Individual Phase II T-squared at alpha 0.01 | alpha = 0.01; reference value = ref | ✓ Δ 1.0×10-13 (14 digits) ↗ | ||||
| Individual Hotelling T² chart | Three reference rows for three variables are too few | reference value = ref | ✓ ↗ | ||||
| Moving-average control chart | A constant baseline is rejected | default settings | ✓ ↗ | ||||
| Moving-average control chart | A historical mean without a sigma is refused | historical mean = 12 | ✓ ↗ | ||||
| Moving-average control chart | A stage column resets the window | historical mean = 12; historical sigma = 0.8; window width = 3 | ✓ Δ 4.0×10-16 (15+ digits) ↗ | ||||
| Moving-average control chart | Full-window startup with historical parameters | historical mean = 12; historical sigma = 0.8; partial window policy = full_window; window width = 4 | ✓ Δ 2.9×10-16 (15+ digits) ↗ | ||||
| Moving-average control chart | Missing and excluded rows are omitted before the windows | default settings | ✓ Δ 3.5×10-15 (15+ digits) ↗ | ||||
| Moving-average control chart | Montgomery Example 9.3 all 30 moving averages | historical mean = 10; historical sigma = 1; window width = 5 | ✓ Δ 2.1×10-15 (15+ digits) ↗ | ||||
| Moving-average control chart | Width 3 with a Phase I marker and the moving-range sigma | default settings | ✓ Δ 1.5×10-15 (15+ digits) ↗ | ||||
| Moving-average control chart | Width 5 with the sample standard deviation | sigma estimator = stddev; window width = 5 | ✓ Δ 1.8×10-15 (15+ digits) ↗ | ||||
| Moving-average control chart | Width one is the individuals specification | window width = 1 | ✓ Δ 3.0×10-16 (15+ digits) ↗ | ||||
| Multivariate EWMA chart | A smoothing weight above 1 is refused | decision limit = 11; reference value = ref; smoothing = 1.2 | ✓ ↗ | ||||
| Multivariate EWMA chart | A stage column restarts the recursion | decision limit = 12; reference value = ref; smoothing = 0.3 | ✓ Δ 8.5×10-14 (14 digits) ↗ | ||||
| Multivariate EWMA chart | A user-calibrated limit needs a source note | decision limit = 11; limit provenance = user_calibrated; reference value = ref | ✓ ↗ | ||||
| Multivariate EWMA chart | Lambda 1 reproduces the individual Hotelling statistic | decision limit = 11; reference value = ref; smoothing = 1 | ✓ Δ 1.0×10-13 (14 digits) ↗ | ||||
| Multivariate EWMA chart | Lowry Table 4 MEWMA from printed inputs | decision limit = 8.79; reference value = reference; smoothing = 0.1 | ✓ Δ 1.0×10-14 (15+ digits) ↗ | ||||
| Multivariate EWMA chart | MEWMA with lambda 0.2 and a trial limit of 11 | decision limit = 11; reference value = ref | ✓ Δ 6.5×10-13 (13 digits) ↗ | ||||
| Short-run Z-MR chart | A product without parameters is an input error | products = product A, center 10, sigma 0.5, product B, center 25, sigma 1.2 | ✓ ↗ | ||||
| Short-run Z-MR chart | A stage column breaks adjacency | products = product A, center 10, sigma 0.5, product B, center 25, sigma 1.2, product C, center 3, sigma 0.1 | ✓ Δ 3.8×10-17 (15+ digits) ↗ | ||||
| Short-run Z-MR chart | A zero sigma is refused | products = product A, center 10, sigma 0, product B, center 25, sigma 1.2, product C, center 3, sigma 0.1 | ✓ ↗ | ||||
| Short-run Z-MR chart | Minitab Z-MR printed factors versus full precision | products = product A, center 0, sigma 1 | ✓ Δ 3.8×10-17 (15+ digits) ↗ | ||||
| Short-run Z-MR chart | Missing and excluded rows break adjacency but stay in the table | products = product A, center 10, sigma 0.5, product B, center 25, sigma 1.2, product C, center 3, sigma 0.1 | ✓ Δ 2.5×10-18 (15+ digits) ↗ | ||||
| Short-run Z-MR chart | Reset the moving range at each product change | products = product A, center 10, sigma 0.5, product B, center 25, sigma 1.2, product C, center 3, sigma 0.1; reset on product change = yes | ✓ Δ 2.9×10-17 (15+ digits) ↗ | ||||
| Short-run Z-MR chart | Standardized Z-MR across three products | products = product A, center 10, sigma 0.5, product B, center 25, sigma 1.2, product C, center 3, sigma 0.1 | ✓ Δ 3.6×10-15 (14 digits) ↗ | ||||
| Subgroup T² and generalized variance | A subgroup size of 1 is refused | reference value = ref | ✓ ↗ | ||||
| Subgroup T² and generalized variance | Montgomery Example 11.1 subgroup Hotelling full-precision limit | alpha = 0.001; reference value = reference | ✓ Δ 9.9×10-12 (12 digits) ↗ | ||||
| Subgroup T² and generalized variance | N <= p keeps the location chart and withholds the spread chart | reference value = ref | ✓ Δ 6.9×10-15 (15+ digits) ↗ | ||||
| Subgroup T² and generalized variance | Subgroup T-squared and generalized variance | reference value = ref | ✓ Δ 1.5×10-14 (14 digits) ↗ | ||||
| Subgroup T² and generalized variance | Subgroups larger than n stop the run | reference value = ref | ✓ ↗ | ||||
| Zone chart | Raw-individual zone chart with a missing observation | statistic = raw_individuals; units = g | ✓ Δ 2.2×10-16 (15+ digits) ↗ | ||||
| Zone chart | Zone chart as an individuals chart of subgroup means | statistic = individuals_of_means | ✓ Δ 1.2×10-14 (14 digits) ↗ | ||||
| Zone chart | Zone chart of subgroup means with R-bar within sigma | statistic = subgroup_mean; within sigma = rbar | ✓ Δ 1.2×10-14 (14 digits) ↗ | ||||
| Zone chart | Zone chart of subgroup means with S-bar within sigma | statistic = subgroup_mean; within sigma = sbar | ✓ Δ 7.6×10-15 (14 digits) ↗ | ||||
| Zone chart | Zone chart with custom weights, reset after signal and two stages | reset after signal = yes; signal score = 6; statistic = subgroup_mean; within sigma = rbar | ✓ Δ 8.9×10-15 (12 digits) ↗ |
Design
| Window | Analysis | Settings compared | NIST | R | Analytical | Published example | Independent reviewer |
|---|---|---|---|---|---|---|---|
| Create MSA study worksheet | Attribute agreement worksheet with standards | layout = attribute_agreement; operator labels = Ann, Bob; part labels = P1, P2, P3; standard values = G, NG, G; trials = 1 | ✓ exact ↗ | ||||
| Create MSA study worksheet | Crossed worksheet: 3 parts x 2 operators x 2 trials | layout = crossed; operator labels = Ann, Bob; part labels = P1, P2, P3; seed = 11; trials = 2 | ✓ exact ↗ | ||||
| Create MSA study worksheet | Nested worksheet: two parts per operator | layout = nested; operator labels = Ann, Bob, Cy; part count = 2; seed = 5; trials = 3 | ✓ exact ↗ | ||||
| Create MSA study worksheet | Part labels are refused for nested designs | layout = nested; operator count = 2; part labels = P1, P2; trials = 2 | ✓ ↗ | ||||
| Create MSA study worksheet | The recorded operation recreates the worksheet | layout = crossed; operator labels = Ann, Bob; part labels = P1, P2, P3; seed = 11; trials = 2 | ✓ exact ↗ | ||||
| Create MSA study worksheet | The same seed reproduces the sheet | layout = crossed; operator labels = Ann, Bob; part labels = P1, P2, P3; seed = 11; trials = 2 | ✓ exact ↗ |
Design › Design of experiments (DOE)
| Window | Analysis | Settings compared | NIST | R | Analytical | Published example | Independent reviewer |
|---|---|---|---|---|---|---|---|
| Analyze Taguchi design | TAGUCHI-ANALYSIS 1 | anova summary = mean; predict levels = 2, 1; predict terms = A, B; sn = larger | ✓ Δ 2.8×10-14 (14 digits) ↗ | ||||
| Analyze Taguchi design | TAGUCHI-ANALYSIS 2 | anova summary = mean; predict levels = 2, 1; predict terms = A, B; sn = smaller | ✓ Δ 2.8×10-14 (14 digits) ↗ | ||||
| Analyze Taguchi design | TAGUCHI-ANALYSIS 3 | anova summary = mean; predict levels = 2, 1; predict terms = A, B; sn = nominal_variance | ✓ Δ 2.8×10-14 (14 digits) ↗ | ||||
| Analyze Taguchi design | TAGUCHI-ANALYSIS 4 | anova summary = mean; predict levels = 2, 1; predict terms = A, B; sn = nominal_mean_sd | ✓ Δ 2.8×10-14 (14 digits) ↗ | ||||
| Analyze Taguchi design | TAGUCHI-ANALYSIS 5 | anova summary = mean; dynamic reference = intercept; predict levels = 2, 1; predict terms = A, B; signal values = 1, 2, 3; sn = dynamic | ✓ Δ 7.8×10-14 (13 digits) ↗ | ||||
| Analyze Taguchi design | TAGUCHI-ANALYSIS 6 | anova summary = mean; dynamic reference = origin; predict levels = 2, 1; predict terms = A, B; signal values = 1, 2, 3; sn = dynamic | ✓ Δ 2.8×10-14 (14 digits) ↗ | ||||
| Design of experiments (DOE) | A factor with low above high is refused | default settings | ✓ ↗ | ||||
| Design of experiments (DOE) | Binary response with a logit link | design = factors name A, low 10, high 20, name B, low 1, high 3, name C, low 100, high 200, response name event, model main_ef... | ✓ Δ 9.0×10-12 (9 digits) ↗ | ||||
| Design of experiments (DOE) | Binary response with a probit link | design = factors name A, low 10, high 20, name B, low 1, high 3, name C, low 100, high 200, response name event, model main_ef... | ✓ Δ 3.7×10-9 (7 digits) ↗ | ||||
| Design of experiments (DOE) | Center | center count = 0; design = family full_factorial, factors name X, low 0, high 10, name Y, low 50, high 70, response name y; kind = center | ✓ exact ↗ | ||||
| Design of experiments (DOE) | Center | center count = 2; design = family full_factorial, factors name X, low 0, high 10, name Y, low 50, high 70, response name y; kind = center | ✓ Δ 1.1×10-17 (15+ digits) ↗ | ||||
| Design of experiments (DOE) | Central composite | axial type = face_centered; center points = 3; family = central_composite | ✓ exact ↗ | ||||
| Design of experiments (DOE) | Existing-table factorial with two-factor interactions | design = factors name A, low 10, high 20, name B, low 1, high 3, name C, low 100, high 200, response name y, model interactions | ✓ Δ 1.1×10-14 (13 digits) ↗ | ||||
| Design of experiments (DOE) | Full 2^3 factorial with two replicates and three centre points | center points = 3; replicates = 2; seed = 7 | ✓ exact ↗ | ||||
| Design of experiments (DOE) | Full factorial | center points = 2; family = full_factorial | ✓ exact ↗ | ||||
| Design of experiments (DOE) | Legacy factorial analysis with interactions | default settings | ✓ Δ 1.1×10-14 (13 digits) ↗ | ||||
| Design of experiments (DOE) | Log-variance model slopes with equal replication | design = factors name A, low 10, high 20, name B, low 1, high 3, response name y, model main_effects | ✓ Δ 2.2×10-16 (15+ digits) ↗ | ||||
| Design of experiments (DOE) | Main-effects model at 90% confidence | confidence level = 0.9; design = factors name A, low 10, high 20, name B, low 1, high 3, name C, low 100, high 200, response name y, model main_effects | ✓ Δ 4.0×10-15 (14 digits) ↗ | ||||
| Design of experiments (DOE) | The smallest design: two factors, one replicate | randomize = no | ✓ exact ↗ | ||||
| Design of experiments (DOE) | Two maximized responses that both peak at the high corner | design = family full_factorial, factors name A, low 10, high 20, name B, low 1, high 3, name C, low 100, high 200, replicates 2; goals = response y2, goal maximize, weight 1, response y3, goal maximize, weight 1 | ✓ exact ↗ | ||||
| Robust parameter design | ROBUST-ANALYSIS 1 | bootstrap replicates = 99; bootstrap seed = 11; design = factors name C, role control, low -1, high 1, name Z, role noise, low -1, high 1, low probability 0.5, high probabili...; objective = target; target = 10 | ✓ Δ 9.3×10-14 (13 digits) ↗ | ||||
| Robust parameter design | ROBUST-ANALYSIS 2 | bootstrap replicates = 99; bootstrap seed = 11; design = factors name C, role control, low -1, high 1, name Z, role noise, low -1, high 1, low probability 0.75, high probabil...; objective = minimize; target = 10 | ✓ Δ 9.3×10-14 (13 digits) ↗ | ||||
| Robust parameter design | ROBUST-ANALYSIS 3 | bootstrap replicates = 99; bootstrap seed = 11; design = factors name C, role control, low -1, high 1, name Z, role noise, low -1, high 1, low probability 0.5, high probabili...; objective = maximize; target = 10 | ✓ Δ 9.3×10-14 (13 digits) ↗ | ||||
| Robust parameter design | ROBUST-CONFIRM 1 | analysis = design factors name C, role control, low -1, high 1, name Z, role noise, low -1, high 1, low probability 0.5, high pr...; predicted mean = 8; predicted objective = 9; runs per condition = 2; seed = 23; selected = factor C, value -1 | ✓ Δ 1.1×10-17 (15+ digits) ↗ | ||||
| Robust parameter design | ROBUST-CONFIRM 2 | analysis = design factors name C, role control, low -1, high 1, name Z, role noise, low -1, high 1, low probability 0.75, high p...; predicted mean = 8; predicted objective = 9; runs per condition = 2; seed = 23; selected = factor C, value -1 | ✓ Δ 1.3×10-17 (15+ digits) ↗ | ||||
| Robust parameter design | ROBUST-CONFIRM 3 | analysis = design factors name C, role control, low -1, high 1, name Z, role noise, low -1, high 1, low probability 0.5, high pr...; predicted mean = 8; predicted objective = 9; runs per condition = 2; seed = 23; selected = factor C, value -1 | ✓ Δ 9.4×10-18 (15+ digits) ↗ | ||||
| Robust parameter design | ROBUST-GENERATE 1 | replicates = 3; seed = 19 | ✓ exact ↗ | ||||
| Robust parameter design | ROBUST-GENERATE 2 | replicates = 2; seed = 19 | ✓ exact ↗ | ||||
| Robust parameter design | ROBUST-GENERATE 3 | replicates = 3; seed = 19; signal = name S, levels 1, 2, 3 | ✓ exact ↗ | ||||
| Robust parameter design | ROBUST-PLAN 1 | confirmation = analysis design factors name C, role control, low -1, high 1, name Z, role noise, low -1, high 1, low probability 0.5... | ✓ exact ↗ | ||||
| Robust parameter design | ROBUST-PLAN 2 | confirmation = analysis design factors name C, role control, low -1, high 1, name Z, role noise, low -1, high 1, low probability 0.5... | ✓ exact ↗ | ||||
| Robust parameter design | ROBUST-PLAN 3 | confirmation = analysis design factors name C, role control, low -1, high 1, name Z, role noise, low -1, high 1, low probability 0.5... | ✓ exact ↗ | ||||
| Taguchi design | TAGUCHI-DESIGN 1 | array = L4; randomize = no; repeats = 2 | ✓ exact ↗ | ||||
| Taguchi design | TAGUCHI-DESIGN 2 | array = L9; randomize = no; repeats = 2 | ✓ exact ↗ | ||||
| Taguchi design | TAGUCHI-DESIGN 3 | array = L4; noise = outer; outer array = L4; randomize = no; repeats = 2; signal levels = 1, 2, 3 | ✓ exact ↗ |
Design › Power & sample size
| Window | Analysis | Settings compared | NIST | R | Analytical | Published example | Independent reviewer |
|---|---|---|---|---|---|---|---|
| Power and sample size | Normal variance | family = normal_variance; sample size = 20; solve for = power; variance ratio = 2 | ✓ Δ 4.4×10-16 (15+ digits) ↗ | ||||
| Power and sample size | One proportion | analysis = one_proportion; effect size = 0.5; sample size = 30; solve for = power | ✓ Δ 1.1×10-16 (15+ digits) ↗ | ||||
| Power and sample size | One proportion | analysis = one_proportion; effect size = 0.5; solve for = sample_size; target power = 0.8 | ✓ exact ↗ | ||||
| Power and sample size | One sample t | alpha = 0.05; analysis = one_sample_t; effect size = 0.5; sample size = 30; solve for = power | ✓ Δ 6.2×10-14 (13 digits) ↗ | ||||
| Power and sample size | One sample t | alpha = 0.05; analysis = one_sample_t; effect size = 0.5; solve for = sample_size; target power = 0.8 | ✓ exact ↗ | ||||
| Power and sample size | One sample t | alpha = 0.1; analysis = one_sample_t; effect size = 0.5; sample size = 2; solve for = power | ✓ Δ 9.9×10-14 (12 digits) ↗ | ||||
| Power and sample size | One sample t | alternative = greater; analysis = one_sample_t; effect size = 0.5; sample size = 30; solve for = power | ✓ Δ 1.6×10-13 (12 digits) ↗ | ||||
| Power and sample size | One sample t | alternative = less; analysis = one_sample_t; effect size = 0.5; sample size = 30; solve for = power | ✓ Δ 1.6×10-13 (12 digits) ↗ | ||||
| Power and sample size | One sample t | analysis = one_sample_t; effect size = -1 | ✓ ↗ | ||||
| Power and sample size | One sample t | analysis = one_sample_t; effect size = 0.0001; sample size = 30; solve for = power | ✓ Δ 5.2×10-15 (12 digits) ↗ | ||||
| Power and sample size | One sample t | analysis = one_sample_t; effect size = 0.5; solve for = sample_size; target power = 0.85 | ✓ exact ↗ | ||||
| Power and sample size | One sample t | analysis = one_sample_t; effect size = 1e-08; sample size = 30; solve for = power | ✓ Δ 6.2×10-17 (14 digits) ↗ | ||||
| Power and sample size | One sample t | analysis = one_sample_t; sample size = 1; solve for = power | ✓ ↗ | ||||
| Power and sample size | One way ANOVA | analysis = one_way_anova; effect size = 0.5; sample size = 30; solve for = power | ✓ Δ 1.7×10-10 (9 digits) ↗ | ||||
| Power and sample size | One way ANOVA | analysis = one_way_anova; effect size = 0.5; solve for = sample_size; target power = 0.8 | ✓ exact ↗ | ||||
| Power and sample size | Paired t | analysis = paired_t; effect size = 0.5; sample size = 30; solve for = power | ✓ Δ 6.2×10-14 (13 digits) ↗ | ||||
| Power and sample size | Paired t | analysis = paired_t; effect size = 0.5; solve for = sample_size; target power = 0.8 | ✓ exact ↗ | ||||
| Power and sample size | Poisson rate | alternative = greater; exposure = 10; family = poisson_rate; null rate = 0.1; poisson rate = 0.2; sample size = 15; solve for = power | ✓ Δ 1.1×10-16 (15+ digits) ↗ | ||||
| Power and sample size | Raw ANOVA | family = raw_anova; solve for = power; standard deviation = 3 | ✓ Δ 6.0×10-17 (15+ digits) ↗ | ||||
| Power and sample size | Raw proportion | design = paired; family = raw_proportion; null proportion = 0.5; proportion = 0.6; solve for = power | ✓ ↗ | ||||
| Power and sample size | Raw proportion | family = raw_proportion; null proportion = 0.5; proportion = 0.6; sample size = 50; solve for = power | ✓ Δ 1.7×10-16 (15+ digits) ↗ | ||||
| Power and sample size | Raw t | design = independent; family = raw_t; mean difference = 1.2; ratio = 1.5; sample size = 20; solve for = power; standard deviation = 2 | ✓ Δ 3.1×10-13 (12 digits) ↗ | ||||
| Power and sample size | Raw t | family = raw_t; mean difference = 1; sample size = 30; solve for = power; standard deviation = 2 | ✓ Δ 6.1×10-14 (13 digits) ↗ | ||||
| Power and sample size | Raw t | family = raw_t; mean difference = 1; solve for = sample_size; standard deviation = 2 | ✓ Δ 1.7×10-13 (12 digits) ↗ | ||||
| Power and sample size | Two proportion | analysis = two_proportion; effect size = 0.5; ratio = 1; sample size = 30; solve for = power | ✓ Δ 2.8×10-16 (15+ digits) ↗ | ||||
| Power and sample size | Two proportion | analysis = two_proportion; effect size = 0.5; ratio = 1; solve for = sample_size; target power = 0.8 | ✓ exact ↗ | ||||
| Power and sample size | Two sample t | analysis = two_sample_t; effect size = 0.5; ratio = 1.5; sample size = 30; solve for = power | ✓ Δ 2.0×10-13 (12 digits) ↗ | ||||
| Power and sample size | Two sample t | analysis = two_sample_t; effect size = 0.5; ratio = 1; solve for = sample_size; target power = 0.8 | ✓ exact ↗ | ||||
| Power and sample size | Unsupported | analysis = unsupported | ✓ ↗ | ||||
| Power and sample size | Z | family = z; known sigma = 2; mean difference = 1; sample size = 25; solve for = power | ✓ Δ 1.1×10-16 (15+ digits) ↗ | ||||
| Power for two-level designs | Full | alpha = 0.05; delta = 1; replicates = 2; sigma = 1; solve for = power; target power = 0.8 | ✓ Δ 5.2×10-13 (11 digits) ↗ | ||||
| Power for two-level designs | Full | alpha = 0.05; delta = 1; replicates = 2; sigma = 1; solve for = replicates; target power = 0.8 | ✓ Δ 7.3×10-14 (13 digits) ↗ | ||||
| Power for two-level designs | Full | alpha = 0.1; delta = 1; replicates = 2; sigma = 1; solve for = power; target power = 0.8 | ✓ Δ 2.1×10-13 (12 digits) ↗ | ||||
| Power for two-level designs | Main | alpha = 0.05; delta = 1; replicates = 2; sigma = 1; solve for = power; target power = 0.8 | ✓ Δ 8.9×10-13 (11 digits) ↗ | ||||
| Reliability demonstration and estimation plans | Duration for ten units with an exponential model | confidence = 0.95; mission time = 1000; mode = duration; sample size = 10; search dimension = test_duration; target reliability = 0.9 | ✓ Δ 3.2×10-10 (12 digits) ↗ | ||||
| Reliability demonstration and estimation plans | Failure-terminated exponential chi-square rule | allowed failures = 1; confidence = 0.95; mission time = 1000; mode = duration; sample size = 10; scheme = failure_terminated; target reliability = 0.9 | ✓ Δ 2.9×10-13 (15+ digits) ↗ | ||||
| Reliability demonstration and estimation plans | One allowed failure at 90% confidence | allowed failures = 1; confidence = 0.9; mission time = 1000; mode = binomial; target reliability = 0.95 | ✓ exact ↗ | ||||
| Reliability demonstration and estimation plans | Weibull | confidence = 0.95; distribution = weibull; mission time = 1000; mode = duration; sample size = 10; search dimension = test_duration; target reliability = 0.9 | ✓ ↗ | ||||
| Reliability demonstration and estimation plans | Zero-failure binomial demonstration | confidence = 0.95; mission time = 1000; mode = binomial; target reliability = 0.9 | ✓ Δ 1.1×10-16 (14 digits) ↗ | ||||
| Sample size for precision and tolerance | Distribution-free full-range coverage | confidence = 0.95; content = 0.9; criterion = coverage; max n = 500; mode = distribution_free_tolerance | ✓ Δ 3.9×10-18 (15+ digits) ↗ | ||||
| Sample size for precision and tolerance | Howe two-sided normal tolerance factor | assumed sd = 2.4; confidence = 0.95; content = 0.9; criterion = factor; max n = 500; mode = normal_tolerance; sided = two_sided; target = 2.5 | ✓ Δ 1.4×10-15 (15+ digits) ↗ | ||||
| Sample size for precision and tolerance | Student-t mean half-width | assumed sd = 2.4; confidence = 0.95; criterion = absolute; max n = 500; mode = mean; target = 0.75 | ✓ Δ 2.2×10-16 (15+ digits) ↗ | ||||
| Sample size for precision and tolerance | Wilson proportion half-width | assumed proportion = 0.35; confidence = 0.95; criterion = absolute; max n = 500; mode = proportion; target = 0.1 | ✓ Δ 1.4×10-17 (15+ digits) ↗ |
Design › Simulation
| Window | Analysis | Settings compared | NIST | R | Analytical | Published example | Independent reviewer |
|---|---|---|---|---|---|---|---|
| Probability calculator | A different recorded fingerprint is reported, not accepted | distribution = family normal, mean 5, standard deviation 2; recorded = no; rows = 50; seed = 12345 | ✓ ↗ | ||||
| Probability calculator | A negative standard deviation is refused | distribution = family normal, standard deviation -1; x values = 0 | ✓ ↗ | ||||
| Probability calculator | A quantile probability of 1 is refused | distribution = family normal; probabilities = 1 | ✓ ↗ | ||||
| Probability calculator | An empty request is refused | distribution = family poisson, mean 2 | ✓ ↗ | ||||
| Probability calculator | Binomial with p = 0 is degenerate | distribution = family binomial, trials 5, probability 0; x values = 0, 1 | ✓ exact ↗ | ||||
| Probability calculator | Binomial(10, 1/2): P(2 < X <= 5) | distribution = family binomial, trials 10, probability 0.5; interval = lower 2, upper 5, lower inclusive no | ✓ exact ↗ | ||||
| Probability calculator | Binomial(10, 1/2): P(2 <= X < 5) | distribution = family binomial, trials 10, probability 0.5; interval = lower 2, upper 5, upper inclusive no | ✓ Δ 6.0×10-17 (15+ digits) ↗ | ||||
| Probability calculator | Column names that differ only in case are refused | distribution = family normal; rows = 5; seed = 1 | ✓ ↗ | ||||
| Probability calculator | More than 1,000,000 cells is refused | distribution = family normal; rows = 500001; seed = 1 | ✓ ↗ | ||||
| Probability calculator | One row is the smallest table | distribution = family exponential, scale 2; rows = 1; seed = 0 | ✓ exact ↗ | ||||
| Probability calculator | Poisson(3.7) values and discrete quantiles | distribution = family poisson, mean 3.7; probabilities = 0.05, 0.5, 0.95; x values = 0, 2, 2.5, 9 | ✓ Δ 5.3×10-17 (14 digits) ↗ | ||||
| Probability calculator | Probability calculator: F | distribution = family f, numerator df 3, denominator df 12; interval = lower 0.5, upper 4; probabilities = 0.1, 0.5, 0.99; x values = 0.25, 1, 3.49, 9 | ✓ Δ 1.7×10-15 (14 digits) ↗ | ||||
| Probability calculator | Probability calculator: chi square | distribution = family chi_square, degrees of freedom 7; interval = lower 2, upper 12; probabilities = 0.05, 0.5, 0.95; x values = 0.5, 7, 14, 30 | ✓ Δ 1.8×10-15 (14 digits) ↗ | ||||
| Probability calculator | Probability calculator: exponential | distribution = family exponential, scale 2.5; interval = lower 1, upper 4; probabilities = 0.05, 0.5, 0.9; x values = 0.1, 1, 2.5, 12 | ✓ Δ 1.8×10-16 (15+ digits) ↗ | ||||
| Probability calculator | Probability calculator: normal | distribution = family normal, mean 10, standard deviation 2; interval = lower 8, upper 12; probabilities = 0.025, 0.5, 0.95; x values = 7, 10, 13.5, 20 | ✓ Δ 1.9×10-15 (14 digits) ↗ | ||||
| Probability calculator | Probability calculator: t | distribution = family t, degrees of freedom 4.5; interval = lower -1, upper 2; probabilities = 0.01, 0.5, 0.975; x values = -3, 0, 1.25, 6 | ✓ Δ 2.7×10-15 (15+ digits) ↗ | ||||
| Probability calculator | Probability calculator: weibull | distribution = family weibull, shape 1.7, scale 3; interval = lower 1, upper 5; probabilities = 0.1, 0.632, 0.99; x values = 0.2, 1.5, 3, 9 | ✓ Δ 9.0×10-16 (15+ digits) ↗ | ||||
| Probability calculator | Quantile at a cumulative step returns that step | distribution = family binomial, trials 4, probability 0.5; probabilities = 0.3125 | ✓ Δ 6.0×10-17 (15+ digits) ↗ | ||||
| Probability calculator | Replaying the recorded operation recreates the table | distribution = family normal, mean 5, standard deviation 2; recorded = yes; rows = 50; seed = 12345 | ✓ exact ↗ | ||||
| Probability calculator | Seeded Poisson table uses integer columns | distribution = family poisson, mean 3.5; rows = 20; seed = 7 | ✓ Δ 3.5×10-17 (15+ digits) ↗ | ||||
| Probability calculator | Seeded normal table: shape, names and theoretical moments | distribution = family normal, mean 5, standard deviation 2; rows = 50; seed = 12345 | ✓ exact ↗ | ||||
| Probability calculator | Student t with one degree of freedom has no mean | distribution = family t, degrees of freedom 1; x values = 1 | ✓ Δ 2.2×10-16 (15+ digits) ↗ | ||||
| Probability calculator | Upper tail below the double range keeps its logarithm | distribution = family normal, mean 0, standard deviation 1; x values = 40 | ✓ Δ 5.6×10-14 (15+ digits) ↗ | ||||
| Simulate model | SIMULATION-FIXED 1 | confidence level = 0.95; draws = 100; inputs = name C, source fixed, value 1; model kind = stored; percentiles = 25, 50, 75; stored model = family ols, response Response, predictors name C, kind numeric, feature order Intercept, C, coefficient names Interce...; thresholds = 11, 12, 13 | ✓ Δ 4.0×10-15 (14 digits) ↗ | ||||
| Simulate model | SIMULATION-FIXED 2 | confidence level = 0.95; draws = 200; inputs = name C, source fixed, value -1; model kind = stored; percentiles = 25, 50, 75; stored model = family ols, response Response, predictors name C, kind numeric, feature order Intercept, C, coefficient names Interce...; thresholds = 7, 8, 9 | ✓ Δ 3.6×10-15 (15+ digits) ↗ | ||||
| Simulate model | SIMULATION-FIXED 3 | confidence level = 0.9; draws = 100; inputs = name C, source fixed, value 1; model kind = stored; percentiles = 25, 50, 75; stored model = family ols, response Response, predictors name C, kind numeric, feature order Intercept, C, coefficient names Interce...; thresholds = 11, 12, 13 | ✓ Δ 4.0×10-15 (15+ digits) ↗ | ||||
| Simulate model | SIMULATION-FIXED 4 | draws = 100; inputs = name C, source entered, distribution family normal, mean 0, standard deviation 1; model kind = stored; stored model = family ols, response Response, predictors name C, kind numeric, feature order Intercept, C, coefficient names Interce... | ✓ exact ↗ |
Predict
| Window | Analysis | Settings compared | NIST | R | Analytical | Published example | Independent reviewer |
|---|---|---|---|---|---|---|---|
| Fit and score regression models | A target without a fitted predictor is refused | stored fit supplied | ✓ ↗ | ||||
| Fit and score regression models | An unseen categorical level is rejected | stored fit supplied | ✓ ↗ | ||||
| Fit and score regression models | Logistic | event value = yes; family = logistic; interval kind = mean | ✓ exact ↗ | ||||
| Fit and score regression models | OLS | confidence level = 0.9; family = ols; interval kind = mean | ✓ Δ 6.6×10-16 (15+ digits) ↗ | ||||
| Fit and score regression models | OLS | family = ols | ✓ Δ 1.8×10-15 (14 digits) ↗ | ||||
| Fit and score regression models | OLS | family = ols; interval kind = individual | ✓ Δ 6.6×10-16 (15+ digits) ↗ | ||||
| Fit and score regression models | OLS | family = ols; interval kind = mean | ✓ Δ 2.9×10-11 (10 digits) ↗ | ||||
| Fit and score regression models | Poisson | family = poisson; interval kind = mean | ✓ exact ↗ | ||||
| Fit and score regression models | Repeated score column names are refused | stored fit supplied; names = pred, pred | ✓ ↗ | ||||
| Fit and score regression models | Score a target with a frozen OLS artifact (individual) | stored fit supplied | ✓ exact ↗ | ||||
| Fit and score regression models | Score a target with a frozen OLS artifact (mean) | stored fit supplied | ✓ exact ↗ | ||||
| Fit and score regression models | Score a target with a frozen Poisson artifact and exposure | stored fit supplied | ✓ exact ↗ | ||||
| Fit and score regression models | Score a target with a frozen WLS artifact | stored fit supplied | ✓ exact ↗ | ||||
| Fit and score regression models | Score a target with a frozen logistic artifact | stored fit supplied | ✓ exact ↗ | ||||
| Fit and score regression models | Score columns from the frozen OLS artifact | stored fit supplied; names = pred, lo, hi | ✓ Δ 8.9×10-15 (14 digits) ↗ | ||||
| Fit and score regression models | WLS | family = wls; interval kind = individual | ✓ ↗ | ||||
| Fit and score regression models | WLS | family = wls; interval kind = mean | ✓ Δ 6.5×10-16 (15+ digits) ↗ | ||||
| Model profiler and desirability | A target on a bound is refused | goals = response name y, goal target, weight 1, low 4, high 12, target 12; stored fits supplied | ✓ ↗ | ||||
| Model profiler and desirability | An unattainable goal gives joint desirability zero | goals = response name y, goal maximize, weight 1, low 100, high 200; stored fits supplied | ✓ exact ↗ | ||||
| Model profiler and desirability | OLS profile, desirability and the best corner | goals = response name y, goal maximize, weight 2, low 0, high 20; stored fits supplied | ✓ Δ 8.7×10-15 (15+ digits) ↗ | ||||
| Model profiler and desirability | Poisson profile at an entered exposure of 2.5 | goals = response name cnt, goal minimize, weight 1, low 0, high 60; stored fits supplied | ✓ Δ 6.4×10-14 (14 digits) ↗ | ||||
| Model profiler and desirability | Predictors must cover every retained role | goals = response name y, goal maximize, weight 2, low 0, high 20; stored fits supplied | ✓ ↗ | ||||
| Model profiler and desirability | Target goal at a 90% confidence level | confidence level = 0.9; goals = response name y, goal target, weight 1, low 4, high 12, target 7; stored fits supplied | ✓ Δ 5.5×10-15 (14 digits) ↗ | ||||
| Model profiler and desirability | Two models with weighted joint desirability | goals = response name y, goal maximize, weight 2, low 0, high 20, response name yb, goal maximize, weight 1, low 0, high 1; stored fits supplied | ✓ Δ 2.4×10-15 (14 digits) ↗ |
- 1 optimum confirmed by independent arithmetic - the fitted SSE matches the certified SSE within 1.0e-13 relative (gradient diagnostics at both points sit at the same finite-difference noise floor), so the coefficient/covariance digit shortfall is the flat, ill-conditioned objective, not a stopping error.
- 2 optimum confirmed by independent arithmetic - the fitted SSE matches the certified SSE within -1.3e-13 relative (gradient diagnostics at both points sit at the same finite-difference noise floor), so the coefficient/covariance digit shortfall is the flat, ill-conditioned objective, not a stopping error.
- 3 optimum confirmed by independent arithmetic - the fitted SSE matches the certified SSE within 1.7e-14 relative (gradient diagnostics at both points sit at the same finite-difference noise floor), so the coefficient/covariance digit shortfall is the flat, ill-conditioned objective, not a stopping error.
- 4 optimum confirmed by independent arithmetic - the fitted SSE matches the certified SSE within 1.1e-15 relative (gradient diagnostics at both points sit at the same finite-difference noise floor), so the coefficient/covariance digit shortfall is the flat, ill-conditioned objective, not a stopping error.
- 5 optimum confirmed by independent arithmetic - the fitted SSE matches the certified SSE within 1.9e-15 relative (gradient diagnostics at both points sit at the same finite-difference noise floor), so the coefficient/covariance digit shortfall is the flat, ill-conditioned objective, not a stopping error.
- 6 optimum confirmed by independent arithmetic - the fitted SSE matches the certified SSE within 2.0e-15 relative (gradient diagnostics at both points sit at the same finite-difference noise floor), so the coefficient/covariance digit shortfall is the flat, ill-conditioned objective, not a stopping error.
- 7 optimum confirmed by independent arithmetic - the fitted SSE matches the certified SSE within 2.2e-15 relative (gradient diagnostics at both points sit at the same finite-difference noise floor), so the coefficient/covariance digit shortfall is the flat, ill-conditioned objective, not a stopping error.
- 8 optimum confirmed by independent arithmetic - the fitted SSE matches the certified SSE within 5.6e-14 relative (gradient diagnostics at both points sit at the same finite-difference noise floor), so the coefficient/covariance digit shortfall is the flat, ill-conditioned objective, not a stopping error.
- 9 optimum confirmed by independent arithmetic - the fitted SSE matches the certified SSE within 2.1e-12 relative (gradient diagnostics at both points sit at the same finite-difference noise floor), so the coefficient/covariance digit shortfall is the flat, ill-conditioned objective, not a stopping error.
- 10 optimum confirmed by independent arithmetic - the fitted SSE matches the certified SSE within 6.9e-16 relative (gradient diagnostics at both points sit at the same finite-difference noise floor), so the coefficient/covariance digit shortfall is the flat, ill-conditioned objective, not a stopping error.
- 11 optimum confirmed by independent arithmetic - the fitted SSE matches the certified SSE within 5.5e-16 relative (gradient diagnostics at both points sit at the same finite-difference noise floor), so the coefficient/covariance digit shortfall is the flat, ill-conditioned objective, not a stopping error.
- 12 optimum confirmed by independent arithmetic - the fitted SSE matches the certified SSE within 2.1e-10 relative (gradient diagnostics at both points sit at the same finite-difference noise floor), so the coefficient/covariance digit shortfall is the flat, ill-conditioned objective, not a stopping error.
- 13 optimum confirmed by independent arithmetic - the fitted SSE matches the certified SSE within 4.5e-10 relative (gradient diagnostics at both points sit at the same finite-difference noise floor), so the coefficient/covariance digit shortfall is the flat, ill-conditioned objective, not a stopping error.
- 14 the fitted SSE is strictly below the certified SSE (HypoNum found the better optimum in a flat valley), so the digit shortfall against the certified parameters is the degenerate objective, not a solver defect.
- 15 optimum confirmed by independent arithmetic - the fitted SSE matches the certified SSE within 1.5e-13 relative (gradient diagnostics at both points sit at the same finite-difference noise floor), so the coefficient/covariance digit shortfall is the flat, ill-conditioned objective, not a stopping error.
- 16 optimum confirmed by independent arithmetic - the fitted SSE matches the certified SSE within 2.0e-12 relative (gradient diagnostics at both points sit at the same finite-difference noise floor), so the coefficient/covariance digit shortfall is the flat, ill-conditioned objective, not a stopping error.
- 17 optimum confirmed by independent arithmetic - the fitted SSE matches the certified SSE within 2.6e-11 relative (gradient diagnostics at both points sit at the same finite-difference noise floor), so the coefficient/covariance digit shortfall is the flat, ill-conditioned objective, not a stopping error.
- 18 optimum confirmed by independent arithmetic - the fitted SSE matches the certified SSE within 4.9e-11 relative (gradient diagnostics at both points sit at the same finite-difference noise floor), so the coefficient/covariance digit shortfall is the flat, ill-conditioned objective, not a stopping error.
- 19 optimum confirmed by independent arithmetic - the fitted SSE matches the certified SSE within 3.7e-14 relative (gradient diagnostics at both points sit at the same finite-difference noise floor), so the coefficient/covariance digit shortfall is the flat, ill-conditioned objective, not a stopping error.
- 20 optimum confirmed by independent arithmetic - the fitted SSE matches the certified SSE within 3.6e-13 relative (gradient diagnostics at both points sit at the same finite-difference noise floor), so the coefficient/covariance digit shortfall is the flat, ill-conditioned objective, not a stopping error.
- 21 optimum confirmed by independent arithmetic - the fitted SSE matches the certified SSE within 1.4e-13 relative (gradient diagnostics at both points sit at the same finite-difference noise floor), so the coefficient/covariance digit shortfall is the flat, ill-conditioned objective, not a stopping error.
- 22 optimum confirmed by independent arithmetic - the fitted SSE matches the certified SSE within 1.7e-12 relative (gradient diagnostics at both points sit at the same finite-difference noise floor), so the coefficient/covariance digit shortfall is the flat, ill-conditioned objective, not a stopping error.
- 23 optimum confirmed by independent arithmetic - the fitted SSE matches the certified SSE within 2.3e-12 relative (gradient diagnostics at both points sit at the same finite-difference noise floor), so the coefficient/covariance digit shortfall is the flat, ill-conditioned objective, not a stopping error.
- 24 optimum confirmed by independent arithmetic - the fitted SSE matches the certified SSE within 6.7e-12 relative (gradient diagnostics at both points sit at the same finite-difference noise floor), so the coefficient/covariance digit shortfall is the flat, ill-conditioned objective, not a stopping error.
- 25 optimum confirmed by independent arithmetic - the fitted SSE matches the certified SSE within 6.5e-12 relative (gradient diagnostics at both points sit at the same finite-difference noise floor), so the coefficient/covariance digit shortfall is the flat, ill-conditioned objective, not a stopping error.
- 26 optimum confirmed by independent arithmetic - the fitted SSE matches the certified SSE within 3.6e-12 relative (gradient diagnostics at both points sit at the same finite-difference noise floor), so the coefficient/covariance digit shortfall is the flat, ill-conditioned objective, not a stopping error.
- 27 optimum confirmed by independent arithmetic - the fitted SSE matches the certified SSE within -2.5e-14 relative (gradient diagnostics at both points sit at the same finite-difference noise floor), so the coefficient/covariance digit shortfall is the flat, ill-conditioned objective, not a stopping error.
- 28 optimum confirmed by independent arithmetic - the fitted SSE matches the certified SSE within 6.6e-15 relative (gradient diagnostics at both points sit at the same finite-difference noise floor), so the coefficient/covariance digit shortfall is the flat, ill-conditioned objective, not a stopping error.
- 29 optimum confirmed by independent arithmetic - the fitted SSE matches the certified SSE within 2.0e-14 relative (gradient diagnostics at both points sit at the same finite-difference noise floor), so the coefficient/covariance digit shortfall is the flat, ill-conditioned objective, not a stopping error.
- 30 optimum confirmed by independent arithmetic - the fitted SSE matches the certified SSE within 9.3e-15 relative (gradient diagnostics at both points sit at the same finite-difference noise floor), so the coefficient/covariance digit shortfall is the flat, ill-conditioned objective, not a stopping error.
- 31 optimum confirmed by independent arithmetic - the fitted SSE matches the certified SSE within 1.1e-10 relative (gradient diagnostics at both points sit at the same finite-difference noise floor), so the coefficient/covariance digit shortfall is the flat, ill-conditioned objective, not a stopping error.
- 32 optimum confirmed by independent arithmetic - the fitted SSE matches the certified SSE within 1.3e-10 relative (gradient diagnostics at both points sit at the same finite-difference noise floor), so the coefficient/covariance digit shortfall is the flat, ill-conditioned objective, not a stopping error.
- 33 This reference dataset is deliberately ill-conditioned. The NIST certified values were computed in extended precision; any double-precision solver, including an independent SVD least-squares fit, agrees to about 12 to 13 significant digits. HypoNum's agreement is shown as observed.
- 34 This reference design has a condition number above 10¹³. In double precision the raw-basis coefficients and standard errors cannot be reproduced to the certified digits by any solver; only extended-precision arithmetic can. The digits shown are what double precision achieves.
Not validated yet: 16
- 4 analysis suite has no comparison case yet
- 0 model not available in HypoNum
- 12 reference published to too few digits to assess
- 0 comparison not passed on this build
| Survey | Calibrate weights | analysis suite has no comparison case yet | |
| Survey | Count regression | analysis suite has no comparison case yet | |
| Survey | Generate replicate weights | analysis suite has no comparison case yet | |
| Survey | Multinomial regression | analysis suite has no comparison case yet | |
| Quality › Measurement systems | Gage R repeatability screening | ANOVA | reference published to too few digits to assess |
| Quality › Measurement systems | Gage R repeatability screening | Average range | reference published to too few digits to assess |
| Quality › Measurement systems | Gage R repeatability screening | Chart worksheet | reference published to too few digits to assess |
| Quality › Measurement systems | Gage R repeatability screening | Pooled SD | reference published to too few digits to assess |
| Quality › Measurement systems | Gage R repeatability screening | Range | reference published to too few digits to assess |
| Quality › Measurement systems | Gage R&R | ANOVA | reference published to too few digits to assess |
| Quality › Measurement systems | Gage R&R | Average range | reference published to too few digits to assess |
| Quality › Measurement systems | Gage R&R | Chart worksheet | reference published to too few digits to assess |
| Quality › Measurement systems | Gage R&R | Pooled SD | reference published to too few digits to assess |
| Quality › Measurement systems | Gage R&R | Range | reference published to too few digits to assess |
| Quality › Reliability engineering | Degradation-based lifetime | Degradation-based lifetime: inverse-kelvin temperature acceleration to a use temperature | reference published to too few digits to assess |
| Quality › Reliability engineering | Degradation-based lifetime | Degradation-based lifetime: repeated measurements, lognormal rates, no temperature axis | reference published to too few digits to assess |
Methods
Accuracy policy. A comparison passes when:
| Quantity | Requirement |
|---|---|
| Counts, labels and decisions | exact equality |
| Probabilities and dispersion statistics (variances, standard errors, standard deviations) | relative error at most 10⁻⁴ |
| Other quantities whose reference is at most 10⁻⁹ in magnitude | absolute error at most 10⁻⁹ |
| Other quantities | relative error at most 10⁻⁴ |
| Stated mathematical or statistical conditions | the condition holds |
Many comparisons agree far more closely than the policy requires; the matrix shows the agreement actually observed.
Digits agreed. For a reference c and an error E, the agreement is −log₁₀(E / |c|), rounded down to a whole number and capped at 15. “Exact” means E = 0. Where a reference is published to fewer digits than the product computes, the comparison is listed as not assessed rather than counted either way.
Not assessed. One reason per group:
| Cases | Reason |
|---|---|
| Gehan survival examples (2) | the published tables print the statistics to three or four digits, too few to score |
| AIAG measurement-system examples (5) | the MSA manual prints its worked results to four or five digits |
| Dunnett critical value (1) | the reference comes from another software library without an independent error bound; a quadrature reference is being prepared |
| Degradation lifetime examples (2) | the published reference is an approximation with no stated error bound |